There’s more than one way to analyze a polymer in the pursuit of making better polymeric materials. In two free webinars we’ll explore how to start this process for pilot and scale-up projects as well as the best way to further process the molten extrudate.

Handling hot and formable polymeric material correctly is crucial to ensuring the material meets requirement. And how do you achieve the same results in small vs large scale processes.

Fill out the form to learn how these tools can help you in the pursuit of better polymeric materials.

Webinar 1: Twin-Screw Compounding - Introduction and Scale-Up

New functional polymers are continuously taking over new applications in all areas. The compounding process is a decisive factor in development to ensure that the properties of the active ingredients meet the requirements. This seminar is concerned with the principles of compounding based on selected examples from the industry. A further focal point is the scale transfer from research and development to the production process (scale-up).

Target audience: Scientists, engineers, and experienced staff members from the polymer industry who are involved in the development and testing of new types of polymer compounds as well as their processing.

This webinar provides a complete introduction or refresher to modern twin-screw compounding:

  1. Definition and basics of twin-screw compounding
  2. Equipment solutions for lab-scale compounding
  3. Ancillary equipment used in extrusion and compounding
  4. Transfer from the lab to larger scale processing

Run time: 64 minutes

Webinar 2: Downstream Options for Polymer Extrusion

The handling of still-hot and formable extruded material is a crucial part of the polymer manufacturing process – it significantly influences the material properties and surface finish. To ensure that material requirements are met, a range of dedicated downstream options are available. Downstream equipment is used to prepare the extruded material for further tests. Besides the defined and reproducible handling of the polymer, the downstream process also allows mimicking full scale processes, and can thus be used for small scale production. This is helpful, especially when alterations to the polymer formulation and processing parameters are necessary.

In this webinar you will learn about:

  1. Influence on process parameters on the downstream process
  2. Strand granulation
  3. Chill-rolling
  4. Injection molding as possibilities for downstreaming
  5. Alternative processes for melt processing

Run time: 29 minutes