{"id":2291,"date":"2023-02-28T08:00:03","date_gmt":"2023-02-28T08:00:03","guid":{"rendered":"http:\/\/admin.acceleratingscience.com\/?p=2291"},"modified":"2026-03-03T16:42:30","modified_gmt":"2026-03-03T16:42:30","slug":"platinum-group-metal-recovery-from-spent-catalytic-converters-using-xrf","status":"publish","type":"post","link":"https:\/\/www.thermofisher.com\/blog\/metals\/platinum-group-metal-recovery-from-spent-catalytic-converters-using-xrf\/","title":{"rendered":"Are There Precious Metals in Catalytic Converters?"},"content":{"rendered":"

Scrap Metal Recyclers use XRF analysis to help recover valuable platinum group metals from spent catalytic converters\u00a0<\/strong><\/p>\n

A catalytic converter is a device used to convert toxic vehicle emissions<\/a> to less harmful substances by way of catalyzed, or accelerated, chemical reactions. Most present-day vehicles that run on gasoline, including automobiles, trucks, buses, trains, motorcycles, and planes, have exhaust systems employing a catalytic converter.<\/p>\n

The catalyst component of a catalytic converter is usually platinum (Pt), along with palladium (Pd), and rhodium (Rh). All three of these platinum group metals, or PGMs, are extremely rare but have a broad range of applications in addition to catalytic converters. Platinum, for example, is used in laboratory and dental equipment, electrical contacts and electrodes, and jewelry, while palladium plays a key role in fuel cell technology. With numerous applications and limited supply, these valuable metals are an attractive target by scrap metal recycling facilities for recovery and reuse from spent catalytic converters.<\/p>\n

In 2020, the demand for Pt, Pd, and Rh totaled respectively 215, 308, and 31.2 tons. About 32% of the total Pt, 85% of the total Pd, and 90% of the total Rh were consumed by the automotive catalyst industry(1) . The same year 33.7 tons of Pt, 41.2 tons of Pd, and 7.3 tons of Rh(1) were recovered from scrap recycling<\/a> activities, mainly from spent catalytic converters, representing at the 2020 cumulative average price of fine metals a total value of about $12 Billion.<\/p>\n

Finding The Value of Catalytic Converter PGMs<\/h2>\n

Determining the recovery value of the PGMs in a catalytic converter begins with knowing the composition and ratios of the metals used.\u00a0 Automotive catalyst material is made either of a ceramic substrate, mostly cordierite coated with a precious metal containing a wash coat, or of a metallic substrate with an aluminum oxide wash coat also containing precious metals.\u00a0 The average concentration and the ratio of Pt and Rh were more or less constant 20 years ago, so a simple weighting was sufficient to arrive at a good estimation of the precious metal content. However, the price of these three elements has fluctuated strongly over the last 20 years, depending on the supply, demand, and speculation. These variations, as well as the tightening of emission legislation, have had a direct correlation on the composition of the catalysts, which themselves have had a strong influence on demand.<\/p>\n

Currently, the composition, which depends on the engine displacement and the type of fuel used, varies dramatically. The formulation can consist of only Pt, or various ratios of Pt-Pd-Rh, Pt-Rh, and Pd-Rh. Most of today\u2019s recycled catalytic converters come from cars manufactured, on average, 10 to 15 years ago. The recoverable amounts of Pt, Pd, and Rh in each can range from 1-2 grams for a small car to 12-15 grams for a big truck in the US.<\/p>\n

The value of the PGM composition of a single catalytic converter can vary from less than $100 to more than $1000.\u00a0 Moreover, the trade of ground-up material sold as catalysts can be very dangerous because of possible alterations, which can mean inclusion of lead or spent nickel-cadmium batteries.<\/p>\n

Tools to Help Analyze Catalytic Converter Material<\/h2>\n

To avoid considerable financial losses, recycling companies need to quickly and accurately determine the contents of Pt, Pd, and Rh in spent catalytic converters at the collector\u2019s site or in the refineries. In order to analyze non-homogeneous materials like catalytic converters, the collected catalysts with ceramic substrate usually undergo a \u201cde-canning\u201d operation, which is the extraction of the honeycomb-structured ceramic material from the steel case. All of the ceramic is then sorted crushed, milled, and mostly blended with other catalysts. In contrast, converters with a metallic substrate are first shredded or milled, and then the metallic parts are separated using magnets and winnowing from the wash coat powder containing precious metals. Because of this enrichment, the PGM content of these wash coat samples is usually much higher than that for milled ceramics. In both cases, the materials are pulverized to a maximum 250\u00b5m and loaded into sample cups or sample bags for analysis, and then analyzed using x-ray fluorescence (XRF) technology<\/a>.<\/a><\/p>\n

XRF is a non-destructive analytical technique used to determine the elemental composition of materials. Handheld XRF analyzers<\/a> work by measuring the fluorescent (or secondary) X-rays emitted from a sample when excited by a primary X-ray source. Each of the elements present in a sample produces a set of characteristic fluorescent X-rays, or \u201cunique fingerprints\u201d. These \u201cfingerprints\u201d are distinct for each element, making handheld XRF analysis an excellent tool for quantitative and qualitative measurements.<\/p>\n

A recent study evaluated x-ray fluorescence (XRF) analysis as compared to lab assays for achieving this objective. To see the results, including the correlation curves, repeatability data, methodology, and comments, read \u00a0Automotive Catalytic Converters application summary<\/a>.<\/p>\n

Additional Resources and References<\/h2>\n