{"id":1136,"date":"2026-11-17T05:33:46","date_gmt":"2026-11-17T05:33:46","guid":{"rendered":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/?p=1136"},"modified":"2026-11-17T05:33:49","modified_gmt":"2026-11-17T05:33:49","slug":"tem-sample-preparation-automation","status":"publish","type":"post","link":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/","title":{"rendered":"TEM Sample Preparation Automation: Matching the Level to the Workflow\u00a0"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">In most labs, TEM sample capacity depends on the availability of experienced operators who can reliably navigate to the region of interest, perform lift-out, precisely execute thinning and endpointing, recover from interruptions, and train new users to do the same.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Automation can reduce that constraint, but not every sample requires the same level of automation.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For relatively uniform samples, repeatable process execution and controlled thinning may be sufficient. For site-specific semiconductor analysis, the harder problem is knowing exactly where to stop, especially at the most advanced nodes.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The Thermo Scientific Helios FIB-SEM portfolio reflects these different requirements. Thermo Scientific AutoTEM Software workflows range from guided and automated preparation to ML-based fiducial endpointing and AI-based device endpointing. The right level depends on the sample, the targeting requirement, and where expert intervention is limiting capacity.&nbsp;<\/p>\n\n\n\n<div style=\"height:20px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n<h2 style=\"font-size: 100%\"><strong><span class=\"NormalTextRun SCXW35256863 BCX0\" data-ccp-parastyle=\"heading 2\">Different samples require different levels of<\/span><span class=\"NormalTextRun SCXW35256863 BCX0\" data-ccp-parastyle=\"heading 2\"> TEM<\/span><span class=\"NormalTextRun SCXW35256863 BCX0\" data-ccp-parastyle=\"heading 2\"> preparation <\/span><span class=\"NormalTextRun SCXW35256863 BCX0\" data-ccp-parastyle=\"heading 2\">automation<\/span><\/strong><\/h2>\n\n\n<p class=\"wp-block-paragraph\">For thin films, epitaxial layers, bulk materials, and other relatively uniform samples, advanced endpointing will not be the primary requirement. If the region of interest is broad, the larger opportunity can be batch automating preparation to improve repeatability and utilization.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The Helios 5 DualBeam with AutoTEM 5 Software remains relevant for these established, repeatable workflows. Helios PFIBs with AutoTEM 5 Software also have an important role when Ga-free preparation is a priority.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">As TEM preparation moves toward smaller device structures, thinner lamellae, and more demanding site-specific targets, the automation requirement changes. The challenge is no longer just executing the workflow reliably. Automation increasingly needs information about <strong>where the lamella is relative to the target<\/strong>.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That is the distinction between the three AutoTEM 6 Software levels that can be configured with our most advanced Ga-based systems, the Helios 6 HD FIB-SEM and the Helios 6 HX FIB-SEM.&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"392\" src=\"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-blog-table-1024x392-1.png\" alt=\"\" class=\"wp-image-1137\" srcset=\"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-blog-table-1024x392-1.png 1024w, https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-blog-table-1024x392-1-300x115.png 300w, https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-blog-table-1024x392-1-768x294.png 768w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-6-hd-1024x576-1.png\" alt=\"Helios 6 HD\" class=\"wp-image-1138\" srcset=\"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-6-hd-1024x576-1.png 1024w, https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-6-hd-1024x576-1-300x169.png 300w, https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-6-hd-1024x576-1-768x432.png 768w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Read further to learn more about the use-cases and automation levels that best suit a variety of needs and applications.&nbsp;<\/p>\n\n\n\n<div style=\"height:20px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n<h2 style=\"font-size: 100%\"><strong><span class=\"NormalTextRun SCXW146213084 BCX0\" data-ccp-parastyle=\"heading 2\">AutoTEM 6<\/span><span class=\"NormalTextRun SCXW146213084 BCX0\" data-ccp-parastyle=\"heading 2\"> Software<\/span><span class=\"NormalTextRun SCXW146213084 BCX0\" data-ccp-parastyle=\"heading 2\"> Essential: <\/span><span class=\"NormalTextRun SCXW146213084 BCX0\" data-ccp-parastyle=\"heading 2\">A<\/span><span class=\"NormalTextRun SCXW146213084 BCX0\" data-ccp-parastyle=\"heading 2\">utomate preparation and thinning for volume<\/span><\/strong><\/h2>\n\n\n<p class=\"wp-block-paragraph\">The Helios 6 HD FIB-SEM with AutoTEM 6 Software Essential is designed for high-volume, automated lift-out and blind thinning.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is a strong fit for workflows where structures are sufficiently large or repeating that controlled dose-based thinning can reliably bring the lamella close to the desired final condition. That can include legacy-node and some advanced-node devices where throughput and consistency matter more than sophisticated site-specific endpoint recognition.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">AutoTEM 6 Software coordinates preparation, milling, lift-out, site tracking, grid management, and thinning. High-accuracy stage movement preserves registration during tilts and rotations, while automated preventive maintenance and condition-specific beam alignments support predictable operation across longer runs.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">During pre-thinning, the sample is automatically aligned and oriented before controlled milling of the front and rear faces. The documented workflow uses low-kV steps and\/or manual polishing to achieve final thickness. This dose-based approach standardizes the handoff to final polishing and reduces the amount of expert time required at the end of each sample.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For a lab trying to increase capacity, that\u2019s the key distinction. <strong>If thinning consumes operator time but the target does not require active endpoint recognition, the objective is to automate more of the repeatable process, not necessarily to add more targeting intelligence.<\/strong>&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Current Helios 6 HD FIB-SEM productivity measurements show the broader impact of this approach: <strong>greater than 15% more samples per hour, a 7% increase in system availability, and up to a 30% increase in productivity<\/strong> through the combined effects of throughput, availability, and automated pre-thinning.&nbsp;<\/p>\n\n\n\n<div style=\"height:20px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n<h2 style=\"font-size: 100%\"><strong><span class=\"NormalTextRun SCXW31824085 BCX0\" data-ccp-parastyle=\"heading 2\">AutoTEM 6 <\/span><span class=\"NormalTextRun SCXW31824085 BCX0\" data-ccp-parastyle=\"heading 2\">Software <\/span><span class=\"NormalTextRun SCXW31824085 BCX0\" data-ccp-parastyle=\"heading 2\">Enhanced: <\/span><span class=\"NormalTextRun SCXW31824085 BCX0\" data-ccp-parastyle=\"heading 2\">W<\/span><span class=\"NormalTextRun SCXW31824085 BCX0\" data-ccp-parastyle=\"heading 2\">hen thinning becomes a targeting problem<\/span><\/strong><\/h2>\n\n\n<p class=\"wp-block-paragraph\">For smaller, site-specific device structures, controlled dose alone may not provide enough precision.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is typically where experienced FIB users remain most involved. As the lamella approaches the feature of interest, the consequences of a targeting error increase. Maintaining final thickness is only part of the problem; the device also needs to remain correctly centered between both faces.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">AutoTEM 6 Software Enhanced is designed for this more demanding workflow, as it adds <strong>ML-based fiducial endpointing<\/strong> to high-volume automated preparation.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">With line indicated termination (LIT), engineered marks establish independent termination coordinates for the lamella faces. AutoTEM Software measures their relationship to the target, then uses SEM observations during thinning to determine when each face should stop. Therefore, the endpoint shifts from a dose-only estimate toward image-based feedback near the final approach.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That difference is important for advanced-node failure analysis: <strong>AutoTEM 6 Software Essential automates thinning, but AutoTEM 6 Software Enhanced adds feedback to determine where thinning should stop.<\/strong>&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In the demonstrated, LIT-assisted workflow, automated pre-thinning achieved <strong>less than 15 nm thickness variation, target centering within 10 nm, and greater than 95% process robustness<\/strong>.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For labs reluctant to trust automation near a small device target, this is an important differentiation. The answer is not necessarily more supervision, but an automation strategy that can guarantee results.&nbsp;<\/p>\n\n\n\n<div style=\"height:20px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n<h2 style=\"font-size: 100%\"><strong><span class=\"NormalTextRun SCXW22123108 BCX0\" data-ccp-parastyle=\"heading 2\">AutoTEM 6 <\/span><span class=\"NormalTextRun SCXW22123108 BCX0\" data-ccp-parastyle=\"heading 2\">Software <\/span><span class=\"NormalTextRun SCXW22123108 BCX0\" data-ccp-parastyle=\"heading 2\">Professional: <\/span><span class=\"NormalTextRun SCXW22123108 BCX0\" data-ccp-parastyle=\"heading 2\">E<\/span><span class=\"NormalTextRun SCXW22123108 BCX0\" data-ccp-parastyle=\"heading 2\">xtend automation to the device<\/span><\/strong><\/h2>\n\n\n<p class=\"wp-block-paragraph\">At the most advanced nodes, AutoTEM 6 Software Professional on the Helios 6 HX FIB-SEM moves beyond fiducial-based endpointing to <strong>AI-based device endpointing<\/strong>. This workflow supports not only high-volume capacity but ultimate precision with AI-based device endpointing.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The Helios 6 HX FIB-SEM combines automated navigation and site positioning with machine learning-assisted endpointing and the ability to train and refine automation models for specific device types. With AutoTEM 6 Software Professional, the system supports fully automated TEM sample preparation of <strong>sub-20 nm lamellae with production-grade accuracy<\/strong>. On a selected group of devices, the workflow has demonstrated <strong>sub-nanometer targeting accuracy for TEM lamellae below 20 nm<\/strong>.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The same platform reports greater than <strong>95% robustness for automated weld-to-grid<\/strong> and more than <strong>90% robustness for fully automated thinning to target thickness<\/strong> on selected devices.&nbsp;<\/p>\n\n\n\n<div style=\"height:20px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n<h2 style=\"font-size: 100%\"><strong><span class=\"TextRun SCXW218574174 BCX0\" lang=\"EN-US\" xml:lang=\"EN-US\" data-contrast=\"none\"><span class=\"NormalTextRun SCXW218574174 BCX0\" data-ccp-parastyle=\"heading 2\">Comparing TEM sample preparation automation levels<\/span><\/span><\/strong><\/h2>\n\n\n<p class=\"wp-block-paragraph\">To summarize the progression:&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"392\" src=\"http:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-blog-table-1024x392-1.png\" alt=\"\" class=\"wp-image-1137\" srcset=\"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-blog-table-1024x392-1.png 1024w, https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-blog-table-1024x392-1-300x115.png 300w, https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-blog-table-1024x392-1-768x294.png 768w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">These are workflow-fit examples rather than rigid node boundaries. Target geometry, materials, required lamella thickness, and endpoint requirements all influence the appropriate approach.&nbsp;<\/p>\n\n\n\n<div style=\"height:20px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n<h2 style=\"font-size: 100%\"><strong><span class=\"NormalTextRun SCXW245632758 BCX0\" data-ccp-parastyle=\"heading 2\">Scaling <\/span><span class=\"NormalTextRun SCXW245632758 BCX0\" data-ccp-parastyle=\"heading 2\">TEM preparation <\/span><span class=\"NormalTextRun SCXW245632758 BCX0\" data-ccp-parastyle=\"heading 2\">capacity without scaling operator dependence<\/span><\/strong><\/h2>\n\n\n<p class=\"wp-block-paragraph\">Reliable TEM preparation will always depend on process expertise. What changes with automation is <strong>where that expertise is required<\/strong>.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A highly experienced operator does not necessarily need to supervise every navigation step, alignment, lift-out, grid movement, or thinning pass. Depending on the application, automation can carry the sample much further through the workflow and leave only a limited final intervention\u2014or, in the most advanced workflows, automate device-targeted thinning itself.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That can help laboratories increase sample output while preserving expert capacity for difficult samples, process development, troubleshooting, and training. It can also give new operators a more standardized path to reliable results.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The practical question is therefore not simply how much automation is available.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>It\u2019s how much information the system needs to prepare your particular samples correctly\u2014and how much of that workflow still needs to depend on your most experienced operator.&nbsp;<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"473\" src=\"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/stem-and-gaa-nanosheet-1024x473-1.png\" alt=\"Helios 6 HD with AutoTEM 6 Enhanced prepares high-quality GAA TEM lamellae.\" class=\"wp-image-1139\" srcset=\"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/stem-and-gaa-nanosheet-1024x473-1.png 1024w, https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/stem-and-gaa-nanosheet-1024x473-1-300x139.png 300w, https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/stem-and-gaa-nanosheet-1024x473-1-766x354.png 766w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><figcaption class=\"wp-element-caption\"><em>The Helios 6 HD FIB-SEM with AutoTEM 6 Software Enhanced used to deliver high-quality GAA lamellae.<\/em><\/figcaption><\/figure>\n\n\n<h3 style=\"font-size: 100%\"><strong><span data-contrast=\"none\">Resources<\/span><\/strong><span data-ccp-props=\"{&quot;134233117&quot;:true,&quot;134233118&quot;:true}\">\u00a0<\/span><\/h3>\n<ul>\n<li><b><span data-contrast=\"none\"><a href=\"https:\/\/documents.thermofisher.com\/TFS-Assets\/MSD\/brochures\/helios-fib-sem-instrument-workflow-guide.pdf\" target=\"_blank\" rel=\"noopener\">Choosing a Helios FIB-SEM for your workflow<\/a>:<\/span><\/b><span data-contrast=\"none\"> family eBook for the instrument\/automation decision tree and portfolio comparison<\/span><span data-ccp-props=\"{&quot;134233117&quot;:true,&quot;134233118&quot;:true}\">\u00a0<\/span><\/li>\n<li><b><span data-contrast=\"none\"><a href=\"https:\/\/documents.thermofisher.com\/TFS-Assets\/MSD\/Application-Notes\/tem-prep-helios-6-automation.pdf\" target=\"_blank\" rel=\"noopener\">Helios 6 HD FIB-SEM TEM preparation automation application note<\/a>:<\/span><\/b><span data-contrast=\"none\"> technical deep dive on multi-site automation, thinning, lift-out, and robustness<\/span><\/li>\n<li><b><span data-contrast=\"none\"><a href=\"https:\/\/www.thermofisher.com\/in\/en\/home\/electron-microscopy\/products\/dualbeam-fib-sem-microscopes\/helios\/instruments\/helios-6-hd.html\" target=\"_blank\" rel=\"noopener\">Helios 6 HD FIB-SEM<\/a>:<\/span><\/b><span data-contrast=\"none\"> high-volume, repeatable TEM preparation and AutoTEM 6 Software workflows for semiconductor R&amp;D, metrology, and FA<\/span><span data-ccp-props=\"{&quot;134233117&quot;:true,&quot;134233118&quot;:true}\">\u00a0<br \/><\/span><\/li>\n<li><b><span data-contrast=\"none\"><a href=\"https:\/\/www.thermofisher.com\/in\/en\/home\/electron-microscopy\/products\/dualbeam-fib-sem-microscopes\/helios\/instruments\/helios-6-hx.html\" target=\"_blank\" rel=\"noopener\">Helios 6 HX FIB-SEM<\/a>:<\/span><\/b><span data-contrast=\"none\"> high-end device-targeting and fully automated sub-20 nm story<\/span><span data-ccp-props=\"{&quot;134233117&quot;:true,&quot;134233118&quot;:true}\">\u00a0<\/span><\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>In most labs, TEM sample capacity depends on the availability of experienced operators who can reliably navigate to the region of interest, perform lift-out, precisely execute thinning and endpointing, recover from interruptions, and train new users to do the same.&nbsp; Automation can reduce that constraint, but not every sample requires the same level of automation.&nbsp;<\/p>\n","protected":false},"author":1809,"featured_media":1141,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_monsterinsights_skip_tracking":false,"_genesis_hide_title":false,"_genesis_hide_breadcrumbs":false,"_genesis_hide_singular_image":false,"_genesis_hide_footer_widgets":false,"_genesis_custom_body_class":"","_genesis_custom_post_class":"","_genesis_layout":"","_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_post_was_ever_published":false},"categories":[20,183,19,23],"tags":[69,94,188,97],"division":[],"class_list":["post-1136","post","type-post","status-publish","format-standard","has-post-thumbnail","category-failure-analysis","category-focused-ion-beam","category-semiconductor","category-transmission-electron-microscopy","tag-failure-analysis","tag-fib","tag-msd-em","tag-transmission-electron-microscope","entry"],"_selected_authors":[],"_selected_reviewers":[],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v27.8 (Yoast SEO v27.8) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>TEM Sample Preparation Automation | Thermo Fisher Scientific<\/title>\n<meta name=\"description\" content=\"Explore how TEM sample preparation automation can support different workflows depending on sample types\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"TEM Sample Preparation Automation: Matching the Level to the Workflow\u00a0\" \/>\n<meta property=\"og:description\" content=\"Explore how TEM sample preparation automation can support different workflows depending on sample types\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/\" \/>\n<meta property=\"og:site_name\" content=\"Illuminating Semiconductors\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/thermofisher\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-17T05:33:46+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-17T05:33:49+00:00\" \/>\n<meta property=\"og:image\" content=\"http:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-family-blog-hero-1920x450-1.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1920\" \/>\n\t<meta property=\"og:image:height\" content=\"450\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Swarnim Rawat\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@thermofisher\" \/>\n<meta name=\"twitter:site\" content=\"@thermofisher\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Swarnim Rawat\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"7 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/\"},\"author\":{\"name\":\"Swarnim Rawat\",\"@id\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/#\\\/schema\\\/person\\\/69f922bec6e68102286c598737517b9c\"},\"headline\":\"TEM Sample Preparation Automation: Matching the Level to the Workflow\u00a0\",\"datePublished\":\"2026-11-17T05:33:46+00:00\",\"dateModified\":\"2026-11-17T05:33:49+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/\"},\"wordCount\":1207,\"commentCount\":0,\"image\":{\"@id\":\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/wp-content\\\/uploads\\\/sites\\\/23\\\/2026\\\/11\\\/helios-family-blog-hero-1920x450-1.png\",\"keywords\":[\"Failure Analysis\",\"FIB\",\"msd-em\",\"transmission electron microscope\"],\"articleSection\":[\"Failure Analysis\",\"Focused Ion Beam\",\"Semiconductor\",\"Transmission Electron Microscopy\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/\",\"url\":\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/\",\"name\":\"TEM Sample Preparation Automation | Thermo Fisher Scientific\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/wp-content\\\/uploads\\\/sites\\\/23\\\/2026\\\/11\\\/helios-family-blog-hero-1920x450-1.png\",\"datePublished\":\"2026-11-17T05:33:46+00:00\",\"dateModified\":\"2026-11-17T05:33:49+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/#\\\/schema\\\/person\\\/69f922bec6e68102286c598737517b9c\"},\"description\":\"Explore how TEM sample preparation automation can support different workflows depending on sample types\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/#primaryimage\",\"url\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/wp-content\\\/uploads\\\/sites\\\/23\\\/2026\\\/11\\\/helios-family-blog-hero-1920x450-1.png\",\"contentUrl\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/wp-content\\\/uploads\\\/sites\\\/23\\\/2026\\\/11\\\/helios-family-blog-hero-1920x450-1.png\",\"width\":1920,\"height\":450,\"caption\":\"Helios Family Blog\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.thermofisher.com\\\/blog\\\/semiconductors\\\/tem-sample-preparation-automation\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"TEM Sample Preparation Automation: Matching the Level to the Workflow\u00a0\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/#website\",\"url\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/\",\"name\":\"Illuminating Semiconductors\",\"description\":\"Semiconductor manufacturing stories and solutions about a more connected, more autonomous, and smarter world\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/semiconductors\\\/#\\\/schema\\\/person\\\/69f922bec6e68102286c598737517b9c\",\"name\":\"Swarnim Rawat\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f02bed90065ce2b327ace32b6aa4a9252da3c8b1091d0ca100c642490c42ec8f?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f02bed90065ce2b327ace32b6aa4a9252da3c8b1091d0ca100c642490c42ec8f?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f02bed90065ce2b327ace32b6aa4a9252da3c8b1091d0ca100c642490c42ec8f?s=96&d=mm&r=g\",\"caption\":\"Swarnim Rawat\"},\"url\":\"https:\\\/\\\/admin.acceleratingscience.com\\\/author\\\/swarnim-rawatthermofisher-com\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"TEM Sample Preparation Automation | Thermo Fisher Scientific","description":"Explore how TEM sample preparation automation can support different workflows depending on sample types","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/","og_locale":"en_US","og_type":"article","og_title":"TEM Sample Preparation Automation: Matching the Level to the Workflow\u00a0","og_description":"Explore how TEM sample preparation automation can support different workflows depending on sample types","og_url":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/","og_site_name":"Illuminating Semiconductors","article_publisher":"https:\/\/www.facebook.com\/thermofisher","article_published_time":"2026-11-17T05:33:46+00:00","article_modified_time":"2026-11-17T05:33:49+00:00","og_image":[{"width":1920,"height":450,"url":"http:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-family-blog-hero-1920x450-1.png","type":"image\/png"}],"author":"Swarnim Rawat","twitter_card":"summary_large_image","twitter_creator":"@thermofisher","twitter_site":"@thermofisher","twitter_misc":{"Written by":"Swarnim Rawat","Est. reading time":"7 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/#article","isPartOf":{"@id":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/"},"author":{"name":"Swarnim Rawat","@id":"https:\/\/admin.acceleratingscience.com\/semiconductors\/#\/schema\/person\/69f922bec6e68102286c598737517b9c"},"headline":"TEM Sample Preparation Automation: Matching the Level to the Workflow\u00a0","datePublished":"2026-11-17T05:33:46+00:00","dateModified":"2026-11-17T05:33:49+00:00","mainEntityOfPage":{"@id":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/"},"wordCount":1207,"commentCount":0,"image":{"@id":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/#primaryimage"},"thumbnailUrl":"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-family-blog-hero-1920x450-1.png","keywords":["Failure Analysis","FIB","msd-em","transmission electron microscope"],"articleSection":["Failure Analysis","Focused Ion Beam","Semiconductor","Transmission Electron Microscopy"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/","url":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/","name":"TEM Sample Preparation Automation | Thermo Fisher Scientific","isPartOf":{"@id":"https:\/\/admin.acceleratingscience.com\/semiconductors\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/#primaryimage"},"image":{"@id":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/#primaryimage"},"thumbnailUrl":"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-family-blog-hero-1920x450-1.png","datePublished":"2026-11-17T05:33:46+00:00","dateModified":"2026-11-17T05:33:49+00:00","author":{"@id":"https:\/\/admin.acceleratingscience.com\/semiconductors\/#\/schema\/person\/69f922bec6e68102286c598737517b9c"},"description":"Explore how TEM sample preparation automation can support different workflows depending on sample types","breadcrumb":{"@id":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/#primaryimage","url":"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-family-blog-hero-1920x450-1.png","contentUrl":"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-family-blog-hero-1920x450-1.png","width":1920,"height":450,"caption":"Helios Family Blog"},{"@type":"BreadcrumbList","@id":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/tem-sample-preparation-automation\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/admin.acceleratingscience.com\/semiconductors\/"},{"@type":"ListItem","position":2,"name":"TEM Sample Preparation Automation: Matching the Level to the Workflow\u00a0"}]},{"@type":"WebSite","@id":"https:\/\/admin.acceleratingscience.com\/semiconductors\/#website","url":"https:\/\/admin.acceleratingscience.com\/semiconductors\/","name":"Illuminating Semiconductors","description":"Semiconductor manufacturing stories and solutions about a more connected, more autonomous, and smarter world","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/admin.acceleratingscience.com\/semiconductors\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/admin.acceleratingscience.com\/semiconductors\/#\/schema\/person\/69f922bec6e68102286c598737517b9c","name":"Swarnim Rawat","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/f02bed90065ce2b327ace32b6aa4a9252da3c8b1091d0ca100c642490c42ec8f?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/f02bed90065ce2b327ace32b6aa4a9252da3c8b1091d0ca100c642490c42ec8f?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/f02bed90065ce2b327ace32b6aa4a9252da3c8b1091d0ca100c642490c42ec8f?s=96&d=mm&r=g","caption":"Swarnim Rawat"},"url":"https:\/\/admin.acceleratingscience.com\/author\/swarnim-rawatthermofisher-com\/"}]}},"taxonomy_info":{"category":[{"value":20,"label":"Failure Analysis"},{"value":183,"label":"Focused Ion Beam"},{"value":19,"label":"Semiconductor"},{"value":23,"label":"Transmission Electron Microscopy"}],"post_tag":[{"value":69,"label":"Failure Analysis"},{"value":94,"label":"FIB"},{"value":188,"label":"msd-em"},{"value":97,"label":"transmission electron microscope"}]},"featured_image_src_large":["https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-family-blog-hero-1920x450-1-1024x240.png",760,178,true],"author_info":{"display_name":"Swarnim Rawat","author_link":"https:\/\/admin.acceleratingscience.com\/author\/swarnim-rawatthermofisher-com\/"},"comment_info":0,"category_info":[{"term_id":20,"name":"Failure Analysis","slug":"failure-analysis","term_group":0,"term_taxonomy_id":20,"taxonomy":"category","description":"","parent":0,"count":17,"filter":"raw","meta":[],"cat_ID":20,"category_count":17,"category_description":"","cat_name":"Failure Analysis","category_nicename":"failure-analysis","category_parent":0},{"term_id":183,"name":"Focused Ion Beam","slug":"focused-ion-beam","term_group":0,"term_taxonomy_id":183,"taxonomy":"category","description":"","parent":19,"count":4,"filter":"raw","meta":[],"cat_ID":183,"category_count":4,"category_description":"","cat_name":"Focused Ion Beam","category_nicename":"focused-ion-beam","category_parent":19},{"term_id":19,"name":"Semiconductor","slug":"semiconductor","term_group":0,"term_taxonomy_id":19,"taxonomy":"category","description":"","parent":0,"count":31,"filter":"raw","meta":[],"cat_ID":19,"category_count":31,"category_description":"","cat_name":"Semiconductor","category_nicename":"semiconductor","category_parent":0},{"term_id":23,"name":"Transmission Electron Microscopy","slug":"transmission-electron-microscopy","term_group":0,"term_taxonomy_id":23,"taxonomy":"category","description":"","parent":0,"count":14,"filter":"raw","meta":[],"cat_ID":23,"category_count":14,"category_description":"","cat_name":"Transmission Electron Microscopy","category_nicename":"transmission-electron-microscopy","category_parent":0}],"tag_info":[{"term_id":69,"name":"Failure Analysis","slug":"failure-analysis","term_group":0,"term_taxonomy_id":69,"taxonomy":"post_tag","description":"","parent":0,"count":7,"filter":"raw","meta":[]},{"term_id":94,"name":"FIB","slug":"fib","term_group":0,"term_taxonomy_id":94,"taxonomy":"post_tag","description":"","parent":0,"count":3,"filter":"raw","meta":[]},{"term_id":188,"name":"msd-em","slug":"msd-em","term_group":0,"term_taxonomy_id":188,"taxonomy":"post_tag","description":"","parent":0,"count":1,"filter":"raw","meta":[]},{"term_id":97,"name":"transmission electron microscope","slug":"transmission-electron-microscope","term_group":0,"term_taxonomy_id":97,"taxonomy":"post_tag","description":"","parent":0,"count":5,"filter":"raw","meta":[]}],"jetpack-related-posts":[{"id":1079,"url":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/supporting-advanced-packaging-with-integrated-semiconductor-failure-analysis-workflows\/","url_meta":{"origin":1136,"position":0},"title":"Supporting Advanced Packaging with Integrated Semiconductor Failure Analysis Workflows","author":"Vinay S","date":"October 22, 2026","format":false,"excerpt":"Key takeaways Semiconductor failure analysis of advanced packaging technologies requires the connection of electrical and physical evidence across multiple length scales to identify root cause. Non-destructive methods such as X-ray computed tomography, scanning acoustic microscopy, and lock-in thermography can be used to localize defects for subsequent targeted investigation. Focused ion\u2026","rel":"","context":"In &quot;Failure Analysis&quot;","block_context":{"text":"Failure Analysis","link":"https:\/\/admin.acceleratingscience.com\/semiconductors\/failure-analysis\/"},"img":{"alt_text":"Supporting Advanced Packaging with Integrated Semiconductor Failure Analysis Workflows.","src":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/10\/from-fault-localization-header-image-1920x450-1.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/10\/from-fault-localization-header-image-1920x450-1.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/10\/from-fault-localization-header-image-1920x450-1.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/10\/from-fault-localization-header-image-1920x450-1.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/10\/from-fault-localization-header-image-1920x450-1.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/10\/from-fault-localization-header-image-1920x450-1.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":1108,"url":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/fib-sem-semiconductor-characterization\/","url_meta":{"origin":1136,"position":1},"title":"From Manual Control to Automated Insights: Versatile FIB-SEM Workflows for Semiconductor Research","author":"Claudia Bernal","date":"November 11, 2026","format":false,"excerpt":"As semiconductor devices become increasingly complex and three-dimensional, researchers need more than one way to access and understand the structures hidden beneath the surface. Some investigations begin with hands-on FIB-SEM operation, where researchers need the freedom to explore an unfamiliar device, locate a region of interest, and optimize the preparation\u2026","rel":"","context":"In &quot;Focused Ion Beam&quot;","block_context":{"text":"Focused Ion Beam","link":"https:\/\/admin.acceleratingscience.com\/semiconductors\/semiconductor\/focused-ion-beam\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/fib-sem-semiconductor-characterization-header-1920x450-1.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/fib-sem-semiconductor-characterization-header-1920x450-1.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/fib-sem-semiconductor-characterization-header-1920x450-1.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/fib-sem-semiconductor-characterization-header-1920x450-1.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/fib-sem-semiconductor-characterization-header-1920x450-1.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/fib-sem-semiconductor-characterization-header-1920x450-1.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":1150,"url":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/electron-microscopy-ai-semiconductor-manufacturing\/","url_meta":{"origin":1136,"position":2},"title":"Where Electron Microscopy Fits in the AI Ecosystem","author":"Swarnim Rawat","date":"November 16, 2026","format":false,"excerpt":"Artificial intelligence is often discussed in terms of algorithms, models, and compute performance. Headlines focus on GPUs, large-scale training clusters, and new model capabilities. But beneath that visible layer lies a complex ecosystem, one that spans chip design, fabrication, packaging, and data storage. What ultimately determines the pace of AI\u2026","rel":"","context":"In &quot;DualBeam (FIB-SEM)&quot;","block_context":{"text":"DualBeam (FIB-SEM)","link":"https:\/\/admin.acceleratingscience.com\/semiconductors\/dualbeam-fib-sem\/"},"img":{"alt_text":"Abstract of an AI chip and crystal lattice","src":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/BLG-16771908_Blog-Mohan-POV-on-AI-Social-Preview-1200x630-1.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/BLG-16771908_Blog-Mohan-POV-on-AI-Social-Preview-1200x630-1.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/BLG-16771908_Blog-Mohan-POV-on-AI-Social-Preview-1200x630-1.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/BLG-16771908_Blog-Mohan-POV-on-AI-Social-Preview-1200x630-1.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/BLG-16771908_Blog-Mohan-POV-on-AI-Social-Preview-1200x630-1.jpg?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":625,"url":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/dram-device-dram-fabrication-tem-metrology\/","url_meta":{"origin":1136,"position":3},"title":"Enhancing High-Volume DRAM Manufacturing with Automated TEM Metrology and Characterization","author":"Xiaoting Gu","date":"November 6, 2025","format":false,"excerpt":"Dynamic random-access memory (DRAM) plays a crucial role in computing devices, providing fast access to essential data and allowing them to operate at peak performance. For DRAM device manufacturers, scaling is important as it enables lower cost per unit area by enabling reductions in DRAM cell size. However, as DRAM\u2026","rel":"","context":"In &quot;Failure Analysis&quot;","block_context":{"text":"Failure Analysis","link":"https:\/\/admin.acceleratingscience.com\/semiconductors\/failure-analysis\/"},"img":{"alt_text":"DRAM memory","src":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2024\/04\/DRAM-TEM-Metrology-Blog-Social_1200x630.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2024\/04\/DRAM-TEM-Metrology-Blog-Social_1200x630.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2024\/04\/DRAM-TEM-Metrology-Blog-Social_1200x630.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2024\/04\/DRAM-TEM-Metrology-Blog-Social_1200x630.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2024\/04\/DRAM-TEM-Metrology-Blog-Social_1200x630.jpg?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":1047,"url":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/non-destructive-semiconductor-defect-detection-advanced-packaging-technology\/","url_meta":{"origin":1136,"position":4},"title":"Non-Destructive Semiconductor Defect Detection\u00a0in\u00a0Advanced Packaging\u00a0Technology","author":"Swarnim Rawat","date":"July 1, 2026","format":false,"excerpt":"Key highlights Compared to conventional package designs, semiconductor defect detection\u00a0is\u00a0more difficult\u00a0for\u00a0advanced packaging\u00a0because failure sites are smaller,\u00a0more deeply embedded, and\u00a0are\u00a0distributed across more material interfaces\u00a0 Non-destructive techniques such as X-ray computed tomography, scanning acoustic microscopy, and lock-in thermography provide critical information on advanced\u00a0packages\u00a0that can\u00a0facilitate\u00a0higher-resolution analysis with destructive techniques\u00a0 A full workflow that\u2026","rel":"","context":"In &quot;Advanced Packaging&quot;","block_context":{"text":"Advanced Packaging","link":"https:\/\/admin.acceleratingscience.com\/semiconductors\/semiconductor\/advanced-packaging\/"},"img":{"alt_text":"Advanced packaging","src":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/07\/advanced-packaging-social-1080x1080-1.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/07\/advanced-packaging-social-1080x1080-1.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/07\/advanced-packaging-social-1080x1080-1.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/07\/advanced-packaging-social-1080x1080-1.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/07\/advanced-packaging-social-1080x1080-1.jpg?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":1025,"url":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/advanced-packaging-failure-mechanisms-in-the-ai-era-why-reliability-is-shifting-in-2-5d-and-3d-designs\/","url_meta":{"origin":1136,"position":5},"title":"Advanced Packaging Failure Mechanisms in the AI Era: Why Reliability Is Shifting in 2.5D and 3D Designs","author":"Vinay S","date":"May 4, 2026","format":false,"excerpt":"Artificial intelligence (AI) is reshaping semiconductor design. As transistor scaling slows, performance gains are increasingly driven by advanced packaging, especially 2.5D interposers, 3D stacking, hybrid bonding, and high-bandwidth memory (HBM) integration. But this shift is doing more than increasing compute density. This move towards advanced packaging is also fundamentally changing\u2026","rel":"","context":"In &quot;Advanced Packaging&quot;","block_context":{"text":"Advanced Packaging","link":"https:\/\/admin.acceleratingscience.com\/semiconductors\/semiconductor\/advanced-packaging\/"},"img":{"alt_text":"Advanced Packaging Failure Mechanisms in the AI Era: Why Reliability Is Shifting in 2.5D and 3D Designs","src":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/05\/why-ai-demands-blog-header-1920x450-1.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/05\/why-ai-demands-blog-header-1920x450-1.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/05\/why-ai-demands-blog-header-1920x450-1.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/05\/why-ai-demands-blog-header-1920x450-1.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/05\/why-ai-demands-blog-header-1920x450-1.png?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/05\/why-ai-demands-blog-header-1920x450-1.png?resize=1400%2C800&ssl=1 4x"},"classes":[]}],"jetpack_sharing_enabled":true,"jetpack_featured_media_url":"https:\/\/admin.acceleratingscience.com\/semiconductors\/wp-content\/uploads\/sites\/23\/2026\/11\/helios-family-blog-hero-1920x450-1.png","_links":{"self":[{"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/posts\/1136","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/users\/1809"}],"replies":[{"embeddable":true,"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/comments?post=1136"}],"version-history":[{"count":4,"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/posts\/1136\/revisions"}],"predecessor-version":[{"id":1165,"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/posts\/1136\/revisions\/1165"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/media\/1141"}],"wp:attachment":[{"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/media?parent=1136"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/categories?post=1136"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/tags?post=1136"},{"taxonomy":"division","embeddable":true,"href":"https:\/\/www.thermofisher.com\/blog\/semiconductors\/wp-json\/wp\/v2\/division?post=1136"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}