230x195-show-EF

Maximizing performance in your bioreactor processes

Traditional feeding supplements require a compromise between working volume and feeding space in your bioreactor. Not anymore. Now you can overcome the conventional solubility limitations of fed-batch cell culture and achieve superior performance while minimizing risk.

Gibco EfficientFeed A+, B+, and C+ feeding supplements deliver super-concentrated nutrients in a complete, easy-to-prepare, dry-format feed, allowing you to maximize performance without compromise.

Request information

Superior performance

  • Achieve increases of at least 2- to 5-fold over batch culture, with a means to reach higher titers using super-concentration flexibility
  • Save time with Gibco AGT dry format media for simple, rapid preparation that also helps reduce risk

Reconstitution flexibility

  • Power to super-concentrate up to 150–200g/L at neutral pH, without any additional pH adjustment

Minimize risk

  • Fewer closed-system connections with room temperature storage of reconstituted liquid
  • Less reconstitution steps required in using a single-part product

Ultimate flexibility through super-concentration

The EfficientFeed + Supplements are designed with the flexibility to super-concentrate chemically defined components up to 3X (i.e., 200 g/L) of original levels while remaining pH-neutral. This is accomplished with nutrient delivery technology that allows reconstitution without pH adjustments (i.e., just add water). By adding different amounts of water during reconstitution, you can concentrate these supplements 2X, or up to 3X.

How to super-concentrate:

  1. Weigh out the increased amount indicated here instead of the 1X amount.
  2. Mix for the extended time shown here to help completely dissolve the more concentrated supplements.
Product Concentration Dissolution Time
EfficientFeed A+ 1X (66.4 g/L) 20 min
  3X (199.2 g/L) 75 min
EfficientFeed B+ 1X (52.7 g/L) 20 min
  3X (158.1 g/L) 50 min
EfficientFeed C+ 1X (81.2 g/L) 40 min
  2X (162.4 g/L) 60 min

No more compromise

Until now, traditional fed-batch bioreactor space necessitated a compromise: the amount of complete feeding supplements one could add meant a trade-off between initial working volume and feeding space (dilution factor).

Today, EfficientFeed + Supplements empower you to deliver up to 200 g/L of needed nutrients in a complete, super-concentrated, pH-neutral feed. The reduction in required feeding space provides you with three ways to optimize your bioreactor output for every run:

  1. Reduce product dilution
  2. Maximize working volume
  3. Increase feeding of nutrients for increased titer

Feeding examples (traditional bolus feeding):

Product Concentration % Addition on Culture Days Indicated
  4 5 6 7 8 9 10
EfficientFeed™ A+ 1X (66.4 g/L) 10% - 10% - 10% - 10%
3X (199.2 g/L) 3.3% - 3.3% - 3.3% - 3.3%
EfficientFeed™ B+ 1X (52.7 g/L) 10% - 10% - 10% - 10%
3X (158.1 g/L) 3.3% - 3.3% - 3.3% - 3.3%
EfficientFeed™ C+ 1X (81.2 g/L) 10% - 10% - 10% - 10%
2X (162.4 g/L) 5% - 5% - 5% - 5%

Increase your bioprocess productivity

Gibco EfficientFeed + Supplements are designed to deliver the same 2- to 5-fold increases in titer possible with original EfficientFeed supplements, plus the flexibility to be super-concentrated up to 3X (or 200 g/L) of original levels while remaining pH-neutral and chemically defined.

In the figure below, we demonstrate an improvement in titer with super-concentrated EfficientFeed C+ supplement.

We made it even better

Gibco EfficientFeed + Supplements perform even better than the original versions.

But how do they stack up against other traditional supplements?

Product quality

The Gibco quality you expect

Simple preparation helps reduce risk

Our Advanced Granulation Technology dry media format provides ease-of-use while helping you reduce risk by minimizing the numerous steps and adjustments previously required to prepare conventional media.

Storage of reconstituted liquid also reduces risk

Reconstituted EfficientFeed+ Supplements can be stored at room temperature (in the dark) for the period of a typical fed-batch bioreactor run, freeing you from making multiple closed-system connections. Making just one closed-system connection per bioreactor run reduces the opportunities for an error that could lead to contamination.

Related resources

Flyer: EfficientFeed+ Supplements 
Poster: Strategies for Optimizing Upstream Processes

BioProduction resources

Click below to access products brochures, training videos, mobile apps, and more.

Support

 Request more info on BioProduction