An external controller is available for driving the unit and setting up and monitoring the target voltage and beam current.

• Highly stable flux output of <0.2% standard deviation over 4hr period
• 0.5mÅ max beam current and titanium filter produces 16R/min output of hard X-rays at 65w
• 26.7mm Focus-to-Object Distance (FOD)
• CU020 controller
• Multi-pin connector used to supply the input power to the X-ray unit also provides connections for remote monitoring and control of the target voltage and electron beam current
• Water-cooled with thermal shutdown protection in the event of overheating
• Operating voltage range enables use with a wide range of materials
• 0.2% maximum relative standard deviation over any 4-hour period in 20 hours when operated with the appropriate Thermo Scientific X-ray controller operating above 20kV
• The window orientation relative to the housing is factory set to the G position
• Shielding of the housing is sufficient to ensure that the X-ray leakage is less than 0.5 mR/hour measured one inch away from any part of the housing
• The target voltage and electron beam current are adjusted by using a separate external variable DC voltage source, or by adjusting the programming signal available from the multi-pin connector with external potentiometers
• Recommended shielding: lead, 0.125 in. thick (3.2mm)

Recommended for:

• Gauging
• Analytical