Thermo Scientific™

UltiMate™ DGP-3600SD Dual-Gradient Standard Pump

Related applications:

Industrial Chromatography

Boost your lab’s productivity by increasing sample throughput, achieving higher chromatographic resolution or automating sample preparation with the Thermo Scientific™ Dionex™ UltiMate™ DGP-3600SD Dual-Gradient Standard Pump. Take advantage of short sub-2μm particle columns for faster analyses that consume less solvent. This pump supports all standard LC applications and UHPLC applications up to 62MPa (9,000 psi/620 bar) at flow rates of up to 10mL/min. and is ideal for automating analyte enrichment or matrix elimination.

Back to top
Recommended Use

The DGP-3600SD pump is recommended for research and other analytical laboratories that require a general purpose HPLC pump capable of standard as well as advanced two-dimensional (2D) techniques. It is standard within the UltiMate 3000 SD Dual System.

Simple Method Transfer

UltiMate 3000 Standard SD and Rapid Separation RS pumps and system configurations provide similar gradient delay and extra-column volumes. This simplifies the method transfer between method development labs, commonly using UHPLC pumps and QC and production labs with their standard LC pump setups.

  • Two ternary standard gradient pumps in a single instrument enclosure
  • Serial dual-piston operating principle, low-pressure gradient proportioning
  • Wide operating flow rate range from 200μL/min. to 10mL/min. with high flow rate accuracy
  • Support of operating pressures of up to 62MPa (9,000 psi\620 bar)
  • Thermo Scientific™ SmartFlow™ technology to automatically compensate for compressibility—no manual solvent setting needed
  • Large selection of mixing volumes to perfectly balance gradient delay volume with mixing efficiency
  • Active rear-seal wash to maximize seal lifetime and pump uptime
  • Thermo Scientific™ Dionex™ Chromeleon™ Chromatography Data System software to easily synchronize and control two ongoing parallel runs