Specifications
Input Types6 Inputs - Active 12VDC+ 12 V auxiliary supply for input sensors
LanguagesEnglish, Spanish, French, German, Italian, Dutch, Chinese, Czech, Russian, Polish, Thai, Korean, Brazilian Portuguese
SensitivityDetects metal contaminants as small as 0.3 mm
Electrical Requirements85/260 V AC single phase plus earth ground; 47/65 Hz, 100 watts max.
For Use With (Application)Metal detection: Pharmaceuticals
DescriptionAPEX 500 Rx Metal Detector
ConstructionStainless steel 304 straightlined case, high polish optional. All plastics used are FDA approved.
Certifications/CompliancecCSAus, CE; ISO9001 certified
Speed0.5 m/min. (1.7 ft./min.) to 100 m/min. (330 ft./min.) for the system
Operating Temperature-10°C to +40°C (14°F to 104°F)
Input AllocationSpeed Sensor, Keylock, Product Select 1, Product Select 2, Infeed PEC, Reject Confirmation 1 and Bin Full External Suppression, Reject 1 Complete, Clear All Warnings/Alarms/Faults (selectable via menu), External Alarm and External Reset
Input ApplicationsSpeed Sensor, Keylock, Product Select 1, Product Select 2, Infeed PEC, Reject Confirmation 1 and Bin Full External Suppression, Reject 1 Complete, Clear All Warnings/Alarms/Faults (selectable via menu), External Alarm and External Reset
Output Types6 Relays outputs; Relays: 250 volt AC 2 amp max. 50 volt DC 1 amp max.
Output AllocationReject 1, Reject 2, AuditCheck, Fault, Alarm, Warning, QAT lamp (selectable via menu)
Output ApplicationsReject 1, Reject 2, AuditCheck, Fault, Alarm, Warning, QAT lamp (selectable via menu)
Air Supply5.5 bar (80 psi) nominal, 4 bar (60 psi) minimum - for AuditCheck and/or pneumatic rejector (not required for electronic rejector)
CommunicationsOptional ModBus serial or Ethernet modules
IP RatingType 3 enclosure, metal detector and control panel only
Relative Humidity20 to 80% non-condensing
Unit SizeEach