CID3710D Solid-State Monochrome Video Camera
Thermo Scientific™
CID3710D Solid-State Monochrome Video Camera
Thermo Scientific™ CID3710D solid-state monochrome video camera features an RS-170 video format, interlace-scanned, 776(H) x 512(V) pixel CID array in a compact remote head configuration.
Have Questions?
Catalog number CID3710D
Price (USD)/ Each
-
Request A Quote
Description:
CID3710 D Solid-State Charge Injection Device Video Camera (RS-170)
Active Area:
11 mm (Diagonal)
Total Pixels:
776(H) x 512(V)
Thermo Scientific™ CID3710D solid-state monochrome video camera features an RS-170 video format, interlace-scanned, 776(H) x 512(V) pixel CID array in a compact remote head configuration. Compact remote head configuration connects to the Camera Control Unit via flexible cable supplied to length.
Boasts superior anti-blooming performance and features command stop motion or PIP (Part in Position) to capture and read asynchronous high-speed events in center frame. Versatile camera head-mounting feature simplifies installation in small spaces, and the standard “C” mount lens adapter provides back-focus adjustments.
  • Charge Injection Device (CID) imager is inherently tolerant to highly specular lighting overloads
  • Optical overloads are highly contained within each pixel or the immediately surrounding pixels so charge is not shared with adjacent rows or columns
  • Spectral response is from below 200nm to 1100nm, and coatings are available for X-ray, deep UV, and IR
  • Contiguous uniform pixel structure, where the total sensor is active with virtually no opaque areas, facilitates interpixel interpolation for subpixel edge definition
  • Frame reset, inject inhibit, and dump functions may be used in combination or independently to capture and read Asynchronous high speed events in center frame
  • Camera may be synchronized with an event to precisely locate a part in the field of view, and the use of a strobe allows blur-free images; features a 2:1 interlace-scanned 776(H) x 512(V) CID array with 12.0 x 13.7 micron (4:3) aspect ratio pixels
  • Charge Injection Device (CID) Imager Technology
  • Asynchronous full-frame capture
  • Interlace RS-170 video format
  • 12 x 13.7 micron contiguous pixels
  • Precise edge detection
  • UV through near IR response Selectable 2X, 4X video gain boost

Requires:

Requires an external power source supplying +11.5 to +17VDC.

Recommended for:

  • Remote gauging, metrology
  • Inspection and measurement
  • Edge detection
  • Laser beam profiling Tracking
  • Inspection
  • Machine vision
  • 3-D profiling
Specifications
Distortion0
Imager (Optical Format)2/3 in.
Pixel Size12 x 13.7 μm
Resolution>500 TVL (Horizontal)
Connector Types(J1) 25 Pin D (Male), (J2) 25 Pin D (Female), (J3) 26 Pin D (Female), (BNC) Standard
Operating Humidity Range0 to 95%, Non-Condensing
Inputs(J1) +15 VDC, H Drive/Composite Sync; (J2) V Drive, Inject Inhibit, Frame Reset
Outputs(J1) Video, End of Frame, End of Line, H and V Drive, Composite Sync, Blanking; (J2) Video, ALC, 14.
SensitivityFull Output at 0.3 fc Faceplate, 0 dB Gain, Illumination (T=2850 K)
Length (Metric) Cable2 m
Composite Video1V p-p, terminated into 75ohms
Displayed Pixels755(H) x 484(V) (RS-170 Mode)
Noise52 dB
Signal To Noise Ratio52 dB
Total Pixels776(H) x 512(V)
LevelBlack Level: +50 mV (Auto Black Clamp), White Level: +700 mV, Sync Level: -300 mV
Full Well Capacity>250000 Electron
Active Area11 mm (Diagonal)
Temperature (English) Operating32°F to 122°F
Temperature (Metric) Operating0°C to 50°C
Electrical (Scanning Format)RS-170, 30 FPS, Interlace
Environmental ConditionsShock: 50 G (1/2 Sinewave (at 10 ms Duration))
Mounting OptionsLens Mount: Standard C Mount (1.0 in. - 32 Thread); Camera Mount: 1/4 in. - 20 Thread
Voltage14.5 to 15.5 VDC
Wattage8 W
Power Consumption550 mA
DescriptionCID3710 D Solid-State Charge Injection Device Video Camera (RS-170)
Gainx2, x4 (Internally Switch Selectable)
ImagerCID
Weight (English) CCU33 oz.
Weight (English) Head17 oz.
Weight (Metric) CCU0.93 kg
Weight (Metric) Head0.48 kg
Unit SizeEach