• Adjustable Alarm or Overtemperature Protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat
• Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition
• Counter-weighted door swings upward, directing heat away from operator
• Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber
• Door safety switch protects operator by removing power to the heating elements upon opening the door
• Rear-mounted 0.38in. (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices
• LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F (programmable models only)

Single-setpoint Controller (B1):

• Single ramp to setpoint and a dwell
• Single display shows actual temperature or setpoint

8-step Programmable Controller (C1):

• Ramps to vary heat-up rate and dwell cycles to hold temperature at set levels from 0.1 to 999.9 minutes
• “Holdback” feature “holds” program until furnace temperature heats up or cools down to preprogrammed parameters—program will never outrun furnace performance

Includes:

Oven, Platinel™ II thermocouple and a ceramic hearth plate to protect the bottom heating element.

Note:

120V models require fixed wiring and are not supplied with a power cord.

Warranty: 1 year