Partisol™ 2300 Speciation Sampler

This product has been discontinued however we continue to provide services and support for this product.

This speciation sampler was conceived from the ground up as a sequential sampling platform. Both the four- and 12-channel versions of the device provide sequential sampling capabilities. Four-channel samplers can be upgraded at a later date to the 12-channel configuration.

Four flow channels can be operated simultaneously, each at a flow rate of up to 16.7L/min (one cubic meter per hour) to achieve thermodynamic conditions comparable with PM-2.5 FRM samplers. This also allows more material to be collected on each 47mm filter for analysis than at lower flow rates. Active volumetric flow control maintains a constant volumetric flow rate specified by the user by incorporating four mass flow controllers and ambient temperature and pressure sensors.

Key Features:

• Flexible sequential (12-channel) unit with Partisol-style user interface
• ActiVol™ flow control with four flow controllers; straight flow path
• PM-2.5 and PM-10 impactors ensure sharp size cut point similar to FRM
• Programmable flows (up to 18L/min.)
• Base (Four-Channel) and flexible sampling platform configurations available

Channels can be grouped in the following ways:

• Three groups of four flow channels
• Three groups of three flow channels
• Six groups of two flow channels
• Twelve flow channels

Additional Information:

• Three types of internal data storage
• Simplicity of operation
• Convenient exchange of sampling modules without opening instrument enclosure
• Remote operation through analog input or two-way RS-232 serial link
• Low maintenance requirements