101 Water Level Meter with P7 Probe

The Solinst 101 Water Level Meter P7 Submersible Probe features an extremely durable, laser marked PVDF flat tape.

The Solinst 101 Water Level Meter with P7 Probe features an extremely durable, laser marked PVDF flat tape, with an enhanced dog bone design that is thicker, reducing adherence to the side of well casing.

Features:

• 101 P7 Submersible Probe measures water levels and total well depth
• More consistent measurements with sensor located at the tip of probe
• Solinst PVDF flat tape has increased tensile strength and electrical efficiency
• Durable PVDF non-stretch tape
• Improved electrical properties
• Thicker dog bone design prevents clinging to sides of the well
• Permanently laser marked every 1/100 ft or each mm

The PVDF flat tape is laser marked every 1/100 ft or each mm; lengths up to 1,500 m. New flat tape has increased tensile strength and electrical efficiency by using 6 strands of copper coated stainless steel and 13 strands of stainless steel in each conductor. The P7 Water Level Meter Probe is engineered to allow submersion to 300 m. Sensor at the tip of the probe provides consistently accurate measurements in wells, boreholes, and cascading water, with almost zero displacement.

The P7 Probe is submersible up to 300 m, therefore, you can measure total well depth in ideal conditions. The sensor at the tip of the probe provides consistent measurements with almost zero displacement. The tape seal plug design allows the probe to be quickly and easily replaced, if required.

Size: 5/8 in. diameter, (16 mm x 137 mm)

Weight: 128 grams

A tape guide is provided with each Meter. It protects the tape from damage on rough edges of well casing and ensures easy, consistent measurements, regardless of who takes the readings. It can also provide reel support on the casing.