Vinyl Type B Anaerobic Chamber

Equipment and Features

• Vacuum pump
• Vacuum airlock with moisture trap prevents moisture from being drawn into pump
• Chamber front made of optically clear, pressed, polished 30 mil vinyl with 40 mil vinyl bottom extending 51 mm up on all sides
• Mounted on 19 mm padded plywood base with heavy vinyl cover preventing cuts and punctures to bottom of chamber
• Tubular aluminum frame
• Gas mix regulator and nitrogen background gas regulator plus tubing and fittings
• Large equipment entry port (686 mm diameter) opposite airlock is capped and secured in place with supplied vinyl adhesive after equipment is installed
• Electrical wiring, tubing or cords are input through two feed-thru adaptors, (51 and 38 mm)
• Latex gloves (large) placed over special cuff and situated on permanently attached vinyl sleeves, secured with supplied vinyl adhesive for replacement of damaged gloves without affecting chamber's atmosphere
  • Sleeves made of 15 mil flexible vinyl allowing maximum mobility and dexterity
• Optional neoprene gloves available
• Quick change cuffs
• Two gas regulators
• Two fan boxes
• Four catalyst stak-paks