CID3712D Solid-State Monochrome Video Camera (CCIR)
CID3712D Solid-State Monochrome Video Camera (CCIR)
Thermo Scientific™

CID3712D Solid-State Monochrome Video Camera (CCIR)

Thermo Scientific™ CID3712D solid-state monochrome video camera features a CCIR (European) video format, interlace-scanned, 768(H) x 612(V) pixel CID array in a compact remote head configuration.
Have Questions?
Catalog number CID3712D
Price (USD)
-
Thermo Scientific™ CID3712D solid-state monochrome video camera features a CCIR (European) video format, interlace-scanned, 768(H) x 612(V) pixel CID array in a compact remote head configuration. Compact remote head configuration connects to the Camera Control Unit via flexible cable supplied to length.
Boasts superior anti-blooming performance and features command stop motion or PIP (Part in Position) to capture and read asynchronous high-speed events in center frame. A versatile camera head-mounting feature simplifies installation in small spaces, and the standard “C” mount lens adapter provides back-focus adjustments.
  • Charge Injection Device (CID) imager is inherently tolerant to highly specular lighting overloads
  • Optical overloads are highly contained within each pixel or the immediately surrounding pixels so charge is not shared with adjacent rows or columns
  • Spectral response is from below 200nm to 1100nm, and coatings are available for X-ray, deep UV, and IR
  • Contiguous uniform pixel structure, where the total sensor is active with virtually no opaque areas, facilitates interpixel interpolation for subpixel edge definition
  • Frame reset, inject inhibit, and dump functions may be used in combination or independently to capture and read asynchronous high-speed events in center frame
  • Camera may be synchronized with an event to precisely locate a part in the field of view, and the use of a strobe allows blur-free images
  • Features a 2:1 interlace-scanned 768(H) x 575(V) CID array with 11.5 x 11.5 micron square pixels
  • Charge Injection Device (CID) Imager Technology
  • Asynchronous full-frame capture
  • Interlace CCIR video format
  • Square contiguous pixels
  • Precise edge detection
  • UV through near IR response
  • Selectable 2X, 4X video gain boost

Requires:

Requires an external power source supplying +11.5 to +17VDC.

Recommended for:

  • Remote gauging, metrology
  • Inspection and measurement
  • Edge detection Laser beam profiling
  • Tracking Inspection
  • Machine vision
  • 3-D profiling
Specifications
Active Area11.3 mm (Diagonal)
CameraCCIR, 25 FPS, 2:1 Interlace
Composite Video1V p-p, terminated into 75ohms
Connector Types(J1) 25 Pin D (Male), (J2) 25 Pin D (Female), (J3) 26 Pin D (Female), (BNC) Standard
DescriptionCID3712 D Solid-State Charge Injection Device Video Camera
Displayed Pixels768(H) x 575(V)
Distortion0
Electrical (Scanning Format)CCIR, 25 FPS, 2:1 Interlace
Environmental ConditionsShock: 50 G (1/2 Sinewave (at 10 ms Duration))
Full Well Capacity>250000 Electron
Gainx2, x4 (Internally Switch Selectable)
Inputs(J1) +15 VDC, H Drive/Composite Sync; (J2) V Drive, Dump, Inject Inhibit, Frame Reset, External Trig
Length (Metric) Cable2 m
LevelBlack Level: +50 mV (Auto Black Clamp), White Level: +700 mV, Sync Level: -300 mV
Mounting OptionsLens Mount: Standard C Mount (1.0 in. - 32 Thread); Camera Mount: 1/4 in. - 20 Thread
Noise50 dB
Operating Humidity Range0 to 95%, Non-Condensing
Outputs(J1) Video, End of Field, End of Line, H and V Drive, Composite Sync, Blanking, Field 1 ID, Strobe T
Power Consumption550 mA
SensitivityFull Output at 0.5 fc Faceplate
Signal To Noise Ratio50 dB
Temperature (English) Operating32°F to 122°F
Temperature (Metric) Operating0°C to 50°C
Total Pixels786(H) x 612(V)
Voltage11.5 to 17 VDC
Wattage8.5 W
Weight (English) CCU33 oz.
Weight (English) Head9.7 oz.
Weight (Metric) CCU0.94 kg
Weight (Metric) Head0.27 kg
Imager (Optical Format)2/3 in.
Pixel Size11.5 x 11.5 μm
Resolution>500 TVL (Horizontal)
Unit SizeEach