• Stackable units accept flasks up to 6L
• Two adjustable-height shelves provide added storage
• Choose from two temperature ranges to fulfill a variety of molecular biology, protein expression or plasmid purification studies
• Available in incubated or refrigerated models
• Precisely monitor and control chamber temperature over complete range with ±0.1°C accuracy at 37°C with PID temperature controller
• Overtemperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails
• Solid-state DC brushless motor, variable speed control from 15 to 500rpm
• Continuous and timed operation from 0.1 hour up to 999 hours or 0.1 minute to 999 minutes
• View speed, operating time and temperature simultaneously on three individual LED displays, which help minimize errors in establishing running conditions
• Displayed time counts up during continuous operation and down during timed runs
• Visual/audible signals alert user to temperature deviations; heat turns off if temperature deviates ±1°C of setpoint
• Shaker shutdown and audible/visual alarms signal if unit operates ±10% of set speed, preventing the shaker from walking
• Eliminate sudden starts and stops with soft start feature
• User-adjustable speed calibration can be performed using a digital handheld tachometer, where verification is required and protocols can be standardized
• Safety interlock stops shaking motion when the door is open
• Platform motion stops when excess vibration is detected due to an unbalanced load
• Retains parameters during power failure and restarts unit automatically after power is restored
• RS-232 interface allows remote monitoring of speed, time and temperature
• Large viewing window and internal light allow sample visibility, minimizing the need to open the door
• Door can be hinged from the right or left by the user for convenient placement in the lab
• 18 × 18 in. platform can be dual-tiered inside the chamber to double the shaking capacity
• Corrosion-resistant stainless-steel chamber accommodates a variety of 18 × 18 in. (46 × 46cm) universal and dedicated platforms
• Durable powder-coated, cold-rolled steel exterior construction
• Electrical outlet inside chamber provides power for safe operation of shakers, stirrers or rotators

Overall Dimensions

• Platform dimensions: 18 × 18 in. (45.7 × 45.7cm)
• Overal dimensions L × W × H: 33 × 27 × 40.5 in. (83.9 × 69.6 × 102.9cm)

Ordering Information:

For a complete system, order platforms and clamps (sold separately)

Includes:

• Two adjustable-height perforated stainless-steel shelves.

Requires:

• Universal Platform (without clamps), or
• Dedicated Platform (with pre-installed clamps)

Recommended for:

• Bacterial suspensions
• Hybridizations
• Solubility studies
• Diagnostic test
• Extraction procedures
• Washing procedures
• General mixing
• Protein expression
• Staining and destaining
• Plasmid purification