Sulfo-NHS-LC-biotina EZ-Link™
Sulfo-NHS-LC-biotina EZ-Link™
Sulfo-NHS-LC-biotina EZ-Link™
Sulfo-NHS-LC-biotina EZ-Link™
Sulfo-NHS-LC-biotina EZ-Link™
Thermo Scientific™

Sulfo-NHS-LC-biotina EZ-Link™

La biotina sulfo-NHS-LC Thermo Scientific EZ-Link es un reactivo de biotinilación soluble en agua de longitud intermedia utilizado para etiquetarMás información
Have Questions?
Cambiar vistabuttonViewtableView
Número de catálogoCantidad
21335100 mg
A3925710 x 1mg
Número de catálogo 21335
Precio (USD)
627,80
Each
Añadir al carro de la compra
Cantidad:
100 mg
Pedido a granel o personalizado
Precio (USD)
627,80
Each
Añadir al carro de la compra
La biotina sulfo-NHS-LC Thermo Scientific EZ-Link es un reactivo de biotinilación soluble en agua de longitud intermedia utilizado para etiquetar anticuerpos, proteínas y otras moléculas que tienen aminas primarias.

Características de la biotina Sulfo-NHS-LC EZ-Link:

Etiquetado de proteína: anticuerpos de biotinilato para facilitar la inmovilización, purificación o detección mediante resinas de estreptavidina o sondas
Etiquetado de la superficie celular: proteínas de superficie de biotinilato de células completas, ya que el reactivo cargado negativamente no penetra en las membranas celulares
Reactivo a amina: reacciona con aminas primarias (-NH2), como las cadenas laterales de lisina o el extremo amino de polipéptidos
Soluble: el grupo sulfo-NHS cargado aumenta la solubilidad en agua del reactivo en comparación con los compuestos de éster de N-hidroxisucinimida (NHS) corrientes
Irreversible: forma de enlaces amida permanentes; el agente separador no se puede escindir
Longitud media: el brazo del separador (longitud total añadida al objetivo) es de 22,4 angstroms; proporciona un equilibrio excelente entre la longitud adecuada (repulsión estérica mínima para la unión de biotina) y la masa discreta

La biotina sulfo-NHS es la más corta de tres reactivos EZ-Link muy similares que son solubles en agua y no divisibles y que permiten una biotinilización de anticuerpos, proteínas y cualquier otra macromolécula que contenga aminas primarias en solución. El etiquetado específico de proteínas de la superficie celular es otra aplicación común de estos reactivos exclusivos solubles en agua que no permean las membranas. Con la única diferencia de la longitud de su brazo del separador, los tres reactivos de éster de Sulfo-NHS ofrecen la posibilidad de optimizar experimentos de etiquetado y detección donde la repulsión estérica de la unión de biotina es un factor importante. El reactivo sulfo-NHS-biotina está disponible en envases de varios tamaños y como kits completos de etiquetado de proteínas.

Fabricamos reactivos de biotina para garantizar la máxima integridad, coherencia y rendimiento global posible del producto en las aplicaciones de investigación previstas.

Los ésteres de N-hidroxisulfosuccinimida (NHS) de biotina son el reactivo de biotinilación que más se utiliza. Las biotinas activadas por NHS reaccionan eficazmente con grupos amino primarios (-NH2) en tampones alcalinos para formar enlaces amida estables. Las proteínas (como los anticuerpos) suelen tener varias aminas primarias que están disponibles como dianas para el etiquetado, incluyendo la cadena lateral de residuos de lisina (K) y el extremo N de cada polipéptido.

Las variedades de reactivos de éster de NHS de biotina difieren en longitud, solubilidad, permeabilidad celular y capacidad de escisión. Las biotinas de NHS no sulfonadas permean las células, pero deben disolverse en disolvente orgánico, como DMSO o DMF. Las biotinas de sulfo-NHS (y aquellas con separadores pegilados) son solubles en agua directamente, pero no permean las membranas. Las variedades que contienen enlaces disulfuro se pueden escindir usando agentes reductores, lo que permite desconectar el grupo de biotina de la proteína etiquetada.

Productos relacionados
Kit de biotinilación de sulfo-NHS-LC EZ-Link™
Kit de biotinilación de sulfo-NHS-LC de alta calidad EZ-Link™
Biotina Sulfo-NHS-LC de alta calidad Pierce™

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.

Especificaciones
Permeabilidad celularImpenetrable en células
DescripciónSulfo-NHS-LC-biotina EZ-Link
Tipo de etiquetaBiotinas y análogos
Línea de productosEZ-Link
Tipo de productoSulfo-NHS-LC-biotina
Cantidad100 mg
Fracción reactivaÉster activo, sucinimidilo éster, éster Sulfo-NHS
Reactividad químicaAmina
Etiqueta o tinteBiotina
SolubilidadDMF (dimetilformamida), DMSO (dimetilsulfóxido), agua
SeparadorLongitud media
Unit SizeEach
Contenido y almacenamiento
Almacenar desecado a -20 °C. Se envía a temperatura ambiente

Preguntas frecuentes

Can I make a Sulfo-NHS-LC-Biotin stock solution to use later?

No. NHS esters hydrolyze very quickly. The container must be brought to room temperature (RT) prior to opening, then the amount of biotinylation reagent weighed, dissolved and used immediately.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Can Sulfo-NHS-LC-Biotin be used in cell surface biotinylation?

Yes. Because this molecule dissolves readily in polar solutions and is itself charged by the sodium sulfoxide group on the succinimidyl ring, it cannot permeate the cell wall or membrane of an intact cell. As long as the cell is intact, only the primary amines on the surface will be biotinylated.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Why can't I perform biotinylation reactions in Tris buffer with Sulfo-NHS-LC-Biotin?

Tris is a primary amine, which will directly compete with protein primary amines for reaction with the NHS-ester activated biotin reagent. However, once a protein is labeled and desalted, Tris buffer can be used for storage or assay buffers, as appropriate for the protein and application.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

What molar excess of Sulfo-NHS-LC-Biotin should I use to label antibodies and other proteins?

The molar excess to use depends on the concentration of the ligand to be biotinylated. Although the literature contains references that use between 2-50 molar excess of biotin, we recommend the following: 10-fold molar excess for 10 mg/mL solution of protein; 25-fold molar excess for 2 mg/mL solution of protein.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Can I dissolve the EZ-Link Sulfo-NHS-LC-Biotin, No-Weigh Format (Cat. No. A39257, 21335) in water for storage?

No, the EZ-Link Sulfo-NHS-LC-Biotin, No-Weigh Format (Cat. No. A39257) should not be dissolved in water for storage. We recommended storing EZ-Link Sulfo-NHS-LC-Biotin, No-Weigh Format at -20 degrees C with desiccant as it is very moisture sensitive. Furthermore, to avoid moisture condensation onto the product, equilibrate vial to room temperature before opening.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Citations & References (15)

Citations & References
Abstract
Mechanisms of tethering and cargo transfer during epididymosome-sperm interactions.
Authors:Zhou W, Stanger SJ, Anderson AL, Bernstein IR, De Iuliis GN, McCluskey A, McLaughlin EA, Dun MD, Nixon B
Journal:BMC Biol
PubMed ID:30999907
'The mammalian epididymis is responsible for the provision of a highly specialized environment in which spermatozoa acquire functional maturity and are subsequently stored in preparation for ejaculation. Making important contributions to both processes are epididymosomes, small extracellular vesicles released from the epididymal soma via an apocrine secretory pathway. While considerable ... More
Molecular determinants in Frizzled, Reck, and Wnt7a for ligand-specific signaling in neurovascular development.
Authors:Cho C, Wang Y, Smallwood PM, Williams J, Nathans J
Journal:Elife
PubMed ID:31225798
'The molecular basis of Wnt-Frizzled specificity is a central question in developmental biology. Reck, a multi-domain and multi-functional glycosylphosphatidylinositol-anchored protein, specifically enhances beta-catenin signaling by Wnt7a and Wnt7b in cooperation with the 7-transmembrane protein Gpr124. Among amino acids that distinguish Wnt7a and Wnt7b from other Wnts, two clusters are essential ... More
Norrin-induced Frizzled4 endocytosis and endo-lysosomal trafficking control retinal angiogenesis and barrier function.
Authors:Zhang C, Lai MB, Khandan L, Lee LA, Chen Z, Junge HJ
Journal:Nat Commun
PubMed ID:28675177
Angiogenesis and blood-brain barrier formation are required for normal central nervous system (CNS) function. Both processes are controlled by Wnt or Norrin (NDP) ligands, Frizzled (FZD) receptors, and ß-catenin-dependent signalling in vascular endothelial cells. In the retina, FZD4 and the ligand NDP are critical mediators of signalling and are mutated ... More
USP48 restrains resection by site-specific cleavage of the BRCA1 ubiquitin mark from H2A.
Authors:Uckelmann M, Densham RM, Baas R, Winterwerp HHK, Fish A, Sixma TK, Morris JR
Journal:Nat Commun
PubMed ID:29335415
BRCA1-BARD1-catalyzed ubiquitination of histone H2A is an important regulator of the DNA damage response, priming chromatin for repair by homologous recombination. However, no specific deubiquitinating enzymes (DUBs) are known to antagonize this function. Here we identify ubiquitin specific protease-48 (USP48) as a H2A DUB, specific for the C-terminal BRCA1 ubiquitination ... More
The IgCAM CLMP regulates expression of Connexin43 and Connexin45 in intestinal and ureteral smooth muscle contraction in mice.
Authors:Langhorst H, Jüttner R, Groneberg D, Mohtashamdolatshahi A, Pelz L, Purfürst B, Schmidt-Ott KM, Friebe A, Rathjen FG
Journal:Dis Model Mech
PubMed ID:29361518
CAR-like membrane protein (CLMP), an immunoglobulin cell adhesion molecule (IgCAM), has been implicated in congenital short-bowel syndrome in humans, a condition with high mortality for which there is currently no cure. We therefore studied the function of CLMP in a ... More