Applied Biosystems™

Septas del Recipiente de tampón de cátodo (para los analizadores genéticos de la serie 3500)

Estos septos son para ambos compartimentos del recipiente de tampón de cátodo, para su uso con los analizadores genéticos de la serie 3500.

Número de catálogo	Cantidad
4410715	10 recipientes

Número de catálogo 4410715

Precio (USD)

740,82

Cantidad:

10 recipientes

Precio (USD)

740,82

These septa are for both compartments of the Cathode Buffer Container and are for use with 3500 and SeqStudio Flex series genetic analyzers.

Estos septos son para ambos compartimentos del recipiente de tampón de cátodo y se utilizan con analizadores genéticos de las series 3500 y SeqStudio Flex.

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.

Especificaciones

Para utilizar con (equipo)Analizadores genéticos de la serie 3500, analizadores genéticos de la serie SeqStudio Flex

Tipo de productoRecipiente de tampón de cátodo de septos

Cantidad10 recipientes

Condiciones de envíoTemperatura ambiente

Unit SizeEach

Contenido y almacenamiento

Este producto contiene 10 septos.

Preguntas frecuentes

When I started my run on the Applied Biosystems 3500/3500xL Genetic Analyzer, an error occurred: "Unstable Electrophoresis current detected, check for air bubbles" but I don't see any bubbles. What else can cause this?

Some of the other causes of an Unstable Electrophoresis current detected error message are:

1.Leak on the system
2. Polymer that:
-Has expired
-Has been left on the instrument for more than the recommended time
-Is a mixture of expired polymer and non-expired polymer
3. Running Buffer that was:
-On the instrument longer than 2 weeks
-Not filled to the fill line or evaporated below the fill line
4. An arcing event that was not cleaned afterwards using the water wash wizard
5. Not performing regular maintenance on the instrument
6. Hardware issues

Inspect the system for leaks. If you do not see any leaks on the system, perform the wash the pump chamber and channels wizard using the conditioning pouch and place fresh, non-expired polymer and fresh Anode and Cathode buffer containers. If the problem persists, a service call may be required.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

Do I need to replace the buffer every 14 days if the Applied Biosystems 3500/3500xL Genetic Analyzer is not in use?

If the instrument is not in use, it is not necessary to replace the buffer every 14 days. However, the buffer level needs to remain at the fill line to prevent the capillary or array from drying out. Top off the buffer volume with water if necessary. Replace the anode and cathode buffer containers prior to starting a new run.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.