Search
Thermo Scientific™
5014iQ Beta Attenuation Monitor
The Thermo Scientific™ 5014iQ Beta Attenuation Monitor is an automated ambient particulate measurement utilizing beta attenuation.
| Número de catálogo | Intervalo de medición |
|---|---|
| 5014IQ también denominado 5014iQ | De 0 a 10 000 μg/m3 |
Número de catálogo 5014IQ
también denominado 5014iQ
Precio (USD)
-
Intervalo de medición:
De 0 a 10 000 μg/m3
The Thermo Scientific™ 5014iQ Beta Attenuation Monitor is designed for monitoring PM-2.5, PM-10, PM-1, and TSP in ambient air. The PM samples are collected using a filter tape which automatically advances to a clean spot reducing the requirement for attended operation. The filter tape advance is controlled by user-defined parameters such as mass accumulation limits, flow rates, and advances in a continuous pattern to help mitigate particle loss.
The instrument monitors the sample conditions and adjusts the control system to heat only, when necessary, eliminates moisture effects, and ensures that volatile aerosols remain intact for accurate measurement.
This state-of-the-art monitor features:
- US EPA approved PM-10 (EQPM-1102-150) and PM-2.5
- (EQPM-0609-183) equivalent monitor
- Continuous measurement
- Low detection limit, high accuracy, and resolution
- Enhanced user interface and ePort communication software
- Enhanced ethernet connectivity
- Long-term unattended operation
- Remote data access
Especificaciones
Exactitud±5% using SI-traceable mass foil set (for mass measurement)
Certificaciones/conformidadU.S. EPA PM-2.5 equivalent monitor (EQPM-1609-183)
Protocolos de comunicaciónMODBUS, TCP/IP, Gesytec (Bayern-Hessen), streaming data and NTP (Network Time Protocol) protocols. Simultaneous connections from different locations over Ethernet
Intervalo de medición de concentración60 to 3,600 seconds and 24-hour
Cálculo del promedio de datos:Every 1 second
Fondo (imperial)21.16 in.
Fondo (métrico)53.8 cm
Descripción5014iQ Beta Attenuation Monitor
Requisitos eléctricosDesigned to meet CE: EN61326: 1997 + A1: 1998 + A2: 2001 + A3: 2003, EN61010-1 UL: 61010-1: 2004; CSA: C22.2 No. 61010-1: 2004; FCC: Part 15 Subpart B, Class B, UKCA
Altura (imperial)12.2 in.
Altura (métrico)31 cm
Intervalo de mediciónDe 0 a 10 000 μg/m3
Salidas
- Standard ports 3 full-speed USB ports (one in front, two in rear) 1 gigabit ethernet port
- Analog I/O (optional) 4 isolated voltage inputs 0–10 V 6 isolated analog voltages outputs, with 4 selectable ranges 6 isolated analog current outputs, with 2 selectable ranges
- Digital I/O (optional) 16 digital inputs (TTL) 8 solenoid driver outputs,10 digital reed relay contact outputs
- Serial ports (optional) 1 RS-232/485 port, 1 RS-485 external accessory port
Precisión±2.0 μg/m3, <80 μg/m3, 4–5 μg/m3 > 80 μg/m3 (24-hour average)
Resolución0.1 μg/m3
Flujo y control de muestreo
- Sample flow precision: ±2% of measured value
- Sample flow accuracy: <5% of measured value
Vataje
- 100–240 VAC, 50–60 Hz recommended, 805 watts (115 V)
- 880 watts maximum (220–240 V (instrument, heater & pump)
Peso (imperial)< 55.1 lbs.
Peso (métrico)< 25 kg
Anchura (imperial)16.73 in.
Anchura (métrico)42.5 cm
Caudal1 m3/h (16.67 L/min) measured across an internal subsonic orifice, user selectable 14 to 20 lpm
Gases medidosCarbon-14 (C-14), < 3.7 MBq (<100 μCi)
Temperatura de funcionamiento (imperial)The temperature of sampled air may vary -30 to 50 °C. 5014iQ Monitor must be weather protected within range 4 to 40 °C, an optional complete outdoor enclosure provides complete weather protection
Unit SizeEach