Concentrador de vacío de sobremesa CentriVap refrigerado Labconco con tapa de vidrio

Concentrador de vacío de sobremesa CentriVap refrigerado Labconco con tapa de vidrio

El concentrador centrífugo CentriVap refrigerado está diseñado para concentrar rápidamente varias muestras pequeñas sensibles al calor, como ARN y proteínas, utilizando la fuerza centrífuga, el vacío y la temperatura controlada.
Have Questions?
Número de catálogoIntervalo de temperatura (métrico)
7310041
también denominado LABCONCO-7310041-EACH
-4°C a +100°C
Número de catálogo 7310041
también denominado LABCONCO-7310041-EACH
Precio (USD)
-
Intervalo de temperatura (métrico):
-4°C a +100°C

El concentrador centrífugo CentriVap refrigerado está diseñado para concentrar rápidamente varias muestras pequeñas sensibles al calor, como ARN y proteínas, utilizando la fuerza centrífuga, el vacío y la temperatura controlada.

  • Brushed stainless steel and glacier white, epoxy-coated steel exterior with blue accents.
  • Lid latch with safety sensor.
  • Phenol-free lid gasket.
  • Epoxy-coated aluminum chamber.
  • 1/4 hp refrigeration system to cool chamber to -4° C.
  • 300-watt heater to heat chamber to +100° C.
  • Sensor that reads internal chamber temperature.
  • Microprocessor-controlled programming for “Temperature 1 ”from -4° C to +100° C, “Temperature 1 ”time from 1 to 999 minutes or indefinite, “Temperature 2 ”from -4° C to +100° C, and “Temperature 2 ”time from 0 to 999 minutes or indefinite. Memory stores 1 to 9 programs.
  • LCD for display of program number, set point and actual “Temperature 1 and 2, ”set point and time remaining for “Temperature 1 and 2, ”and refrigeration activation (“Y ”or “N”).
  • Control panel with RUN/STOP button, PREHEAT/ COOL button, set point SELECT button, increase/ decrease buttons, and 3 Quick-Start buttons.
  • Centrifugal motion is provided by a brushless motor capable of achieving up to 1725 rpm.
  • Quick-Stop System to stop vacuum pump, open valve to bleed air into the chamber and stop the rotor within seconds after time expires or RUN/STOP button is pressed.
  • Automatic vacuum release valve.
  • Built-in vacuum delay allows rotor to achieve speed before applying vacuum.
  • Audible alarm to signal completion of set point run time.
  • 1/2 ”OD aluminum hose fitting for connection to vacuum tubing. Vacuum pump is not included.
  • Vacuum port with quick disconnect fitting for 1/4 ”ID tubing.
  • 115 volt models have a 115 volt electrical receptacle on the back to connect accessory vacuum pump to the system.
  • 230 volt models have a reverse IEC electrical receptacle on the back to connect accessory vacuum pump to the system.
  • 115 volt models have a 10-foot, 3-wire cord with NEMA 5-20 plug.
  • 230 volt models have an 8-foot cord with NEMA 6-20 plug.
  • Overall dimensions with closed lid: 14.7 ”wide x 21.7 ”deep x 16.6 ”high (37.3 x 55.1 x 42.2 cm).
  • Actual weight 95 lbs. (43 kg). Shipping weight 108 lbs. (49 kg).
Especificaciones
Dimensiones (Largo x Ancho x Alto)14.3W x 21.7D x 16.6H in.
Peso (imperial)108.0 lb.
Peso (métrico)49.0 kg
Material de la cámaraAluminio revestido de epoxi
Intervalo de temperatura (métrico)-4°C a +100°C
Unit SizeEach