Panel de angiogénesis 18-Plex Human ProcartaPlex™
Panel de angiogénesis 18-Plex Human ProcartaPlex™
Panel de angiogénesis 18-Plex Human ProcartaPlex™
Invitrogen™

Panel de angiogénesis 18-Plex Human ProcartaPlex™

El panel ProcartaPlex 18 de angiogénesis humana permite la investigación del cáncer mediante el análisis de 18 objetivos proteicos en un solo pocillo mediante la tecnología Luminex xMAP.
Have Questions?
Número de catálogoCantidad
EPX180-15806-90196 pruebas
Número de catálogo EPX180-15806-901
Precio (USD)
-
Cantidad:
96 pruebas

El panel ProcartaPlex 18 de angiogénesis humana permite la investigación del cáncer mediante el análisis de 18 objetivos proteicos en un solo pocillo mediante la tecnología Luminex xMAP. La detección simultánea de estos objetivos puede ayudar a explorar procesos como el crecimiento de los vasos sanguíneos durante la progresión del cáncer y la diseminación metastásica. El panel se suministra en un formato listo para usar con viales individuales de reactivos de captura y detección formulados a una concentración 1X, que requieren menos pipeteo y configuración experimental. No se puede combinar con otros paneles o ensayos simples. Complementa al panel 2 de angiogénesis 3-Plex ProcartaPlex (n.º de cat. EPX030-15807-901), que proporciona 3 proteínas diana adicionales en la misma área de investigación.

Los paneles preconfigurados ProcartaPlex se han probado exhaustivamente para determinar la combinabilidad, la interferencia y la reactividad cruzada de los analitos con el fin de proporcionar el mayor nivel de validación y precisión. Todos los paneles ProcartaPlex se suministran con los reactivos necesarios para realizar el ensayo.

Lista de objetivos [región de gránulos]: Angiopoietina-1 [13], BMP-9 [61], CD31 (PECAM-1) [76], EGF [56], EMMPRIN [47], Folistatina [55], FGF-2 [75], G-CSF (CSF-3) [42], HB-EGF [57], HGF [46], IL-8 (CXCL8) [27], Leptina [74], LYVE-1 [22], PDGF-BB [77], Sindecano [73], TIE-2 [67], VEGF-A [78], VEGF-D [53]

Acerca de los ensayos ProcartaPlex para la plataforma Luminex
Los inmunoensayos ProcartaPlex se basan en los principios de un ensayo ELISA tipo sándwich, utilizando dos anticuerpos altamente específicos que se vinculan a diferentes epítopos de una proteína para cuantificar todas las proteínas diana simultáneamente utilizando un instrumento Luminex. Los ensayos multiplex ProcartaPlex requieren tan solo 25 μl de plasma o suero, o 50 μl de sobrenadante de cultivo celular, y solo cuatro horas para obtener los resultados analizados.

Las características incluyen:
• Resultados reproducibles y fiables: validados como panel según el estándar más alto del sector que incluye pruebas de combinación de objetivos de proteínas y reactividad cruzada
• Más resultados por muestra: miden múltiples objetivos de proteínas simultáneamente en una única muestra de 25–50 μl
•Plataforma de multiplexación de tecnología Luminex bien establecida de alta referencia para la detección y cuantificación de proteínas

Los ensayos de ProcartaPlex utilizan la tecnología Luminex xMAP (perfil multianalito) para la detección y cuantificación simultáneas de hasta 65 objetivos proteicos en una sola muestra de plasma, suero, sobrenadantes de cultivo celular y otros fluidos corporales de 25–50 μl.

Los gránulos de Luminex del ensayo de ProcartaPlex se tiñen internamente con proporciones precisas de fluoróforos rojos e infrarrojos para crear firmas específicas que pueden ser identificadas por los sistemas de detección Luminex xMAP (por ejemplo, Luminex 200, FLEXMAP 3D y MAGPIX). Similar a un ELISA tipo sándwich, el ensayo ProcartaPlex utiliza pares de anticuerpos emparejados para identificar la proteína de interés. En un ensayo multiplexado, cada gránulo espectralmente único se etiqueta con anticuerpos específicos para una sola proteína diana, y las proteínas ligadas se identifican con anticuerpos biotinilados y estreptavidina–R-ficoeritrina (RPE). La conjugación de anticuerpos específicos de proteínas en un gránulo distinto permite el análisis de varios analitos en un solo pocillo.

La diferencia más significativa entre un ensayo ProcartaPlex y uno ELISA es que el anticuerpo de captura del ensayo ProcartaPlex se conjuga en un gránulo y no se adsorbe en el pocillo de la microplaca, por lo que los reactivos del ensayo ProcartaPlex flotan en la solución. Para la detección, el instrumento Luminex 200, por ejemplo, contiene dos láseres, uno para distinguir los espectros

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.
Especificaciones
Intervalo del ensayoVer certificado de análisis
Sensibilidad del ensayoSee Certificate of Analysis
Para utilizar con (equipo)Instrumentos Luminex™
FormatoKit multiplex
CV interensayoMenos del 15 %
CV intraensayoMenos del 15 %
N.º plex tamaño multiplex18
Línea de productosProcartaPlex
Tipo de muestraSobrenadantes de suero, plasma y cultivo celular, Plasma, Cell Culture Supernatants
Volumen de muestraSuero y plasma: 25 µl, CCS: 50 µl
Condiciones de envíoHielo húmedo
CombinabilityNo combinable
Tipo de productoPanel de multiplexado
Cantidad96 pruebas
Research AreaCardiovascular
EspecieHumano
Unit SizeEach
Contenido y almacenamiento

• 2 vials Human Standard Mix Q (lyophilized)
• 2 vials Human Standard Mix R (lyophilized)
• 1 vial Capture Bead Mix (1X)
• 1 vial Biotinylated Detection Antibody Mix (1X)
• 1 Bottle Reading Buffer (1X)
• 1 Bottle Wash Buffer (10X)
• 1 Bottle Streptavidin-PE (1X)
• 1 Bottle Universal Assay Buffer (1X)
• 8-tube strip
• Adhesive film
• Greiner Microplate, black, 96-well

Store (at 2°C to 8°C.)

Preguntas frecuentes

What is the size of the Luminex beads you currently use?

The beads used in our Luminex instrument-compatible ProcartaPlex and QuantiGene Plex assays are 6.5 micron superparamagnetic beads.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

I am interested in performing Luminex assays using BioSource kits, and I have a Luminex xMAP system. Besides the kits and system, what other reagents and equipment will I need?

The following is a list of general lab supplies that are required for running BioSource immunoassays on the Luminex xMAP system:
1) Sonicating water bath
2) Orbital shaker
3) Vortexer
4) Repeating and/or multi-channel pipetter (not required, but recommended)
5) Calibrated adjustable precision pipettes, with disposable plastic tips
6) Glass/plastic tubes and racks for preparing reagents
7) Graduated cylinder and container for preparing wash solution
8) Aluminum foil
9) Deionized or distilled water.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Do the Luminex beads require special care in handling?

The Luminex beads should be protected from light because they are susceptible to photobleaching. We recommend protecting the beads by keeping containers covered with aluminum foil during all incubation steps, and exercising care during handling. The beads should not be frozen, subjected to excessive heat, or exposed to organic solvents.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Why would the Luminex acquisition software display "Sample Empty" messages during analysis?

(1) The user did not properly aliquot the diluted beads, such that no beads were actually added to the wells (make sure that the bead concentrates are sonicated and vortexed well, then check the pipet tip to ensure that air bubbles were not drawn up)
(2) The user missed loading diluted beads to some wells, which is likely since the small volume is clear and difficult to visualize in the clear plastic plate (we have now addressed this customer difficulty by coloring each of the Buffer Reagent Kit components)
(3) The user applied too much vacuum pressure at some point during the wash steps, or allowed the pressure to spike even once, such that the filter membrane tore in a few wells releasing the beads (make sure that the vacuum manifold pressure is kept below 5mm/in Hg, depending on their system -- a good rule of thumb is that it should take a full 3-second count to GENTLY empty the wells of 200uL)
(4) The user did not properly sonicate and vortex the beads prior to dilution, such that the percent of bead aggregation was high and the instrument was unable to find enough single beads to meet the events/bead value designated by the customer (make sure that the Bead Concentrate tube is put into the waterbath all the way to the cap, since the tube is hollow until the top third)
(5) The user lost beads by shaking the plate too aggressively or handling it improperly (make sure that the orbital shaker is set to a speed that allows for maximum vortex in the wells without spillage)
(6) The user exposed the beads to an excess of light during storage or running of the assay, such that some but not all of the beads were photobleached and therefore falling outside the acceptable range for each bead region (make sure that the plate is covered on the top/sides with foil throughout the assay, away from Windows and spotlights, and that the bead component of the kits is stored in the dark)*
(7) There was a clog in the sample needle, such that the instrument was unable to take up enough sample to meet the number of events requested per bead region (suggest that the user follow the manual instructions for dislodging a clog, which include several Back Flush steps and may require removal of the needle for sonication with probe alignment).

* Some of the older Antibody Bead Kits still have clear plastic tops instead of black ones. In cases where customers store kits in lit refrigerators, or keep them open on the lab bench, even a few hours of light exposure is enough to photobleach beads. It is important to note, in general, that higher number bead regions are more susceptible to photobleaching. In order to draw conclusions about the source of the difficulty, we would ask to see the data, specifically the Masterplex QT file, which would enable us to examine the pattern of "Sample Empty" occurrences in addition to the bead counts per well.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

What are the Luminex beads made of?

The beads are made of polystyrene.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.