El fenol/cloroformo/alcohol isoamílico UltraPure™ (25:24:1, v/v) se utiliza en la purificación de ácidos nucleicos. Este reactivo consta de alcohol isoamílico,Más información
Have Questions?
Cambiar vista
Número de catálogo
Cantidad
15593049
400 mL
15593031
100 mL
2 opciones
Número de catálogo 15593049
Precio (CLP)
469.307
Each
Añadir al carro de la compra
Cantidad:
400 mL
Precio (CLP)
469.307
Each
Añadir al carro de la compra
El fenol/cloroformo/alcohol isoamílico UltraPure™ (25:24:1, v/v) se utiliza en la purificación de ácidos nucleicos. Este reactivo consta de alcohol isoamílico, cloroformo de alta pureza y fenol UltraPure™ saturado con Tris-HCl.
Uso de fenol/cloroformo/alcohol isoamílico Cuando se extraen mezclas con fenol/cloroformo/alcohol isoamílico, las proteínas se desnaturalizan y se recogen en la fase orgánica o en la interfase, mientras que los ácidos nucleicos permanecen en la fase acuosa. El fenol/cloroformo/alcohol isoamílico UltraPure™ no contiene conservantes. Se envasa en un gas inerte en botellas de color ámbar revestidas de plástico y resistentes a roturas.
Pruebas de rendimiento y calidad El aspecto de la solución se evalúa a temperatura ambiente. No se ha detectado ninguna actividad de ribonucleasa (ARNasa) ni desoxirribonucleasa (ADNasa).
Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.
Especificaciones
Nombre del producto químico o materialFenoles
Línea de productosUltrapuro
PurezaGrado de biología molecular
Cantidad400 mL
Condiciones de envíoTemperatura ambiente
FormularioLíquido
pHpH 8,05
Unit SizeEach
Contenido y almacenamiento
Almacenar en el refrigerador (2–8° C).
Preguntas frecuentes
Do you have any information on DNA and RNA purification using phenol chloroform and alcohol precipitation?
Phenol extraction of proteins:
Phenol extraction is frequently used to remove proteins from nucleic acid solutions. A common protocol is to add an equal volume of buffer-saturated phenol or phenol:chloroform:isoamyl alcohol (25:24:1, v/v/v) to an aqueous nucleic acid solution, vortex, and centrifuge at 14,000 x g for 1 min to separate the phases.
Studies at Thermo Fisher Scientific have shown that the concentration of NaCl in the aqueous solution should not exceed 0.5 M for good recovery of DNA. Residual phenol can be removed from the aqueous phase by extraction with an equal volume of chloroform or ether. After extraction, DNA is usually precipitated with ammonium acetate and ethanol as described in another protocol on this server. Ref. Karger, B. D. (1989) FOCUS 11, 14.
A good source of general information on the properties of phenol can be found in Wallace, Donald M. Large and Small-Scale Phenol Extractions. Methods in Enz. Volume 152 guide to Molecular Cloning Techniques. 1987. Academic Press, Inc. Berger and Kimmel, eds. Chap.4, pg 33-41.
(a) At pH 5 to 6 DNA is selectively retained in the organic phase and interphase, leaving RNA in the aqueous phase. Therefore a pH greater than 7 is needed if DNA is to be extracted.
(b) At pH values below 7.6, poly A+ RNA is lost to the organic phase if chloroform is not present.
(c) Optimal RNA yields in phenol extraction are obtained if the salt concentration is less than 0.15 M NaCl. Salt concentration in the sample is not a factor for larger DNA molecules.
To store RNA after extraction use DEPC-treated water.
What is the recommended protocol for phenol-extraction removal of proteins from nucleic acid containing solutions?
Below is a commonly used protocol:
(1) Add an equal volume of buffer-saturated phenol or phenol:chloroform:isoamyl alcohol (25:24:1, v/v/v) to an aqueous nucleic acid solution. Note: for RNA solutions, acid-phenol is recommended.
(2) Vortex, and centrifuge at 14,000 x g for 1 min to separate the phases.
(3) Residual phenol can be removed from the aqueous phase by extraction with an equal volume of chloroform or ether.
(4) After extraction, DNA/RNA is usually precipitated with ammonium acetate and ethanol.
What is the optimal pH of the phenol:chloroform mixture for isolation of DNA?
Partitioning of the nucleic acids in phenol is pH dependent. At pH 7.0 or higher, both DNA and RNA partition into the aqueous phase. At an acidic pH (below 7.0) DNA is denatured and will move into the organic phase, but the RNA remains in the aqueous phase. The mixture should be adjusted to at least pH 7.4 for work with DNA.
Recently I came across a DNA purification technique, which uses urea during phenol extraction. What is the purpose of using urea?
Using urea during phenol extraction denatures the protein associated with the DNA and the proteins that bind the genomic DNA to the cell wall.