Recipiente del tampón de cátodo (CBC) serie 3500

El recipiente del tampón de cátodo (CBC) contiene un tampón de desplazamiento 1x para apoyar todas las aplicaciones de electroforesisMás información

Número de catálogo	Cantidad
4408256	4 pack

Número de catálogo 4408256

Precio (CLP)

279.100

Añadir al carro de la compra

Cantidad:

4 pack

Precio (CLP)

279.100

Añadir al carro de la compra

El recipiente del tampón de cátodo (CBC) contiene un tampón de desplazamiento 1x para apoyar todas las aplicaciones de electroforesis en los analizadores genéticos Applied Biosystems™ serie 3500. El contenedor tiene dos compartimentos separados: el lado izquierdo proporciona el tampón de cátodo para electroforesis, mientras que el lado derecho proporciona un lavado capilar y una función de eyección de residuos de polímeros entre inyecciones. El CBC se encuentra en un contenedor desechable listo para su uso con una identificación por radiofrecuencia (RFID) incorporada en la etiqueta. La parte superior del CBC está sellada mediante calor con una película de plástico que se debe retirar antes de la instalación directa sobre el instrumento. Cada envase incluye cuatro recipientes individuales.

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.

Especificaciones

Características ecológicasEmbalaje sostenible

Cantidad4 pack

Para utilizar con (equipo)Analizador genético 3500xL Dx, analizador genético 3500 Dx, analizador genético 3500xL, analizador genético 3500

TipoRecipiente del tampón de cátodo

Unit SizeEach

Contenido y almacenamiento

Contiene 4 packs de contenedor de tampón de cátodo. Guarde el contenedor de tampón cátodo entre 2 y 8 °C hasta que esté listo para su uso. Consulte la fecha de caducidad en la etiqueta.

Preguntas frecuentes

My order of Cathode Buffer Container (Cat. No. 4408256) was shipped at room temperature, but the recommended storage conditions are 2-6 degrees C. Can I still use it?

Yes, it is still usable. We ship these buffers at room temperature to minimize the environmental impact of packaging and shipping these products on gel packs. We performed stability and performance studies and found that there was no impact to the performance of these buffers when shipped at room temperature. Please see the CE Buffers Ambient Shipping white paper detailing these studies, for your reference.

When I started my run on the Applied Biosystems 3500/3500xL Genetic Analyzer, an error occurred: "Unstable Electrophoresis current detected, check for air bubbles" but I don't see any bubbles. What else can cause this?

Some of the other causes of an Unstable Electrophoresis current detected error message are:

1.Leak on the system
2. Polymer that:
-Has expired
-Has been left on the instrument for more than the recommended time
-Is a mixture of expired polymer and non-expired polymer
3. Running Buffer that was:
-On the instrument longer than 2 weeks
-Not filled to the fill line or evaporated below the fill line
4. An arcing event that was not cleaned afterwards using the water wash wizard
5. Not performing regular maintenance on the instrument
6. Hardware issues

Inspect the system for leaks. If you do not see any leaks on the system, perform the wash the pump chamber and channels wizard using the conditioning pouch and place fresh, non-expired polymer and fresh Anode and Cathode buffer containers. If the problem persists, a service call may be required.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

I am only using the Applied Biosystems 3500/3500xL Genetic Analyzer once a week. Should I leave the polymer on the instrument or put it back in the refrigerator?

Putting the polymer back at 2-8 degrees C may extend the life of the polymer, however, we do not have any data indicating how long it might extend it. Removing the polymer and putting it back on the system can also result in a trade-off in usage. When placing it back on the system, you will need to degas the polymer for 30-60 min, refill the pump/block, array, and remove bubbles, which will cause you to use more polymer for maintenance than you would for running samples and may decrease the number of runs you can get out of a single polymer bottle/pouch.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

Do I need to replace the buffer every 14 days if the Applied Biosystems 3500/3500xL Genetic Analyzer is not in use?

If the instrument is not in use, it is not necessary to replace the buffer every 14 days. However, the buffer level needs to remain at the fill line to prevent the capillary or array from drying out. Top off the buffer volume with water if necessary. Replace the anode and cathode buffer containers prior to starting a new run.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

How long can I keep the polymer on the Applied Biosystems 3500/3500xL Genetic Analyzer?

For the Applied Biosystems 3500 Series Genetic Analyzer, the polymer can remain on the instrument for 14 days if room temperature is <25 degrees C and for 7 days if >25 degrees C.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.