Mini celofán DryEase™

El celofán de DryEase™ Mini-Gel es un componente del sistema de secado DryEase™ Mini-Gel, que es un kit sencillo yMás información

Número de catálogo	Cantidad
NC2380	200/paq.

Número de catálogo NC2380

Precio (CLP)

150.889

Añadir al carro de la compra

Cantidad:

200/paq.

Precio (CLP)

150.889

Añadir al carro de la compra

El celofán de DryEase™ Mini-Gel es un componente del sistema de secado DryEase™ Mini-Gel, que es un kit sencillo y fácil de usar para el secado de geles de manera uniforme mediante la evaporación pasiva. El kit permite montar los geles en una base entre dos bastidores abiertos, de modo que las dos superficies exteriores de los geles queden expuestas al aire. Por consiguiente, el secado es uniforme y se minimiza el agrietamiento. La solución de secado Gel-Dry™ exclusiva modula la tasa de liberación de agua para garantizar geles sin grietas. Con el sistema DryEase™, los geles se secan durante la noche con una tensión uniforme en todos los puntos del gel para eliminar el agrietamiento.

Aplicaciones: Los geles secados con el sistema DryEase™ son aptos para fluorografía, densitometría, autorradiografía o almacenamiento permanente de geles.

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.

Especificaciones

Cantidad200/paq.

Condiciones de envíoTemperatura ambiente

Línea de productosNovex

Tipo de productoCelofán mini

Unit SizeEach

Contenido y almacenamiento

Almacenar a temperatura ambiente.

Preguntas frecuentes

I dried my gel using your DryEase Mini Gel Drying system and the gel cracked during drying. Can you please help?

Please see below for possible causes and solutions:

- Air trapped between cellophane layers. Apply adequate Gel-Drying solution to prevent bubbles between the gel and cellophane assembly.
- Tension on cellophane too strong. Take care not to stretch the cellophane during dryer assembly.
- Rough edges or small cracks on gel edges. Trim rough edges from the gel to eliminate starting points for cracks.
- Cellophane slips during drying. Make sure clamps hold all four edges of the dryer assembly firmly.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

I am using your DryEase Mini Gel Drying system and would like to peel off the cellophane after drying the gel but it seems really difficult. Can you please offer some tips?

Usually it is not necessary to peel off the cellophane. If your signal is very faint and you are concerned about getting an exposure, you can rub the top surface of your gel with a damp towel and then peel off the cellophane. Then air dry the gel for a few minutes and perform autoradiography.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

I dried my gel using Gel-Drying Solution and it dried milky white. Can the gel be recovered?

Gels turn white when they are dried too rapidly, usually in an environment that is too ventilated, drafty, or warm. You can remedy this problem by dabbing the gel with deionized water on a Kimwipe tissue to rehydrate the white areas. Re-dry the gel in a dark, dry, non-drafty place, such as a drawer or cabinet.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

What is the pore size of the DryEase cellophane?

The pore size of DryEase cellophane is 40 microns.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

Do you offer a system for drying of protein gels?

We offer the following systems for drying of protein gels:

DryEase Mini Gel Drying System (Cat. No. NI2387): Simple-to-use kit for even, crack-free drying of mini gels that dries gels evenly, using passive evaporation. Gels dried with this system are suitable for fluorography, densitometry, autoradiography, or permanent gel storage. Each DryEase Mini-Gel Drying System contains the following components:

- 2-DryEase Mini-Gel Drying Frames (includes 2 frames + 8 clamps) (Cat. No. NI2380)
- 1-DryEase Mini-Gel Drying Base (Cat. No. NI2300)
- 200-DryEase Mini Cellophane precut sheets (Cat. No. NC2380)
- 500 mL Gel-Dry Drying Solution (Cat. No. NI2100)
Large Gel Drying Kit (Cat. No. NI2207): Provides the same even, crack-free gel drying seen with the DryEase Mini-Gel Drying System but is designed to accommodate larger gels or 4 mini-gels. A base for the system is not required.

Each Large Gel Drying Kit contains the following components:

- 1-DryEase Large Gel Drying Frame (includes 8 clamps) (Cat. No. NI2200)
- 100-DryEase Large Cellophane precut sheets (Cat. No. NC2200)
- 500 mL Gel-Dry Drying Solution (Cat. No. LC4025)

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.