Graphite conductive adhesive, alcohol based, Thermo Scientific Chemicals

Catalog Number	Quantity
042465.15	30 g

This chemical may require us to obtain additional information for our regulatory and chemical compliance records. If required, we will contact you for this information once your order is placed.

Catalog number 042465.15

Price (EUR)

Quantity:

Request bulk or custom format

Specifications

DOT InformationHazard Class: 3; Packaging Group: II

Density0.9

Flash Point11°C(52°F)

Health Hazard 1H225-H318-H335-H336

Health Hazard 3P210-P233-P235-P240-P241-P242-P243-P261-P271-P280-P303+P361+P353-P304+P340-P305+P351+P338-P310-P312-P370+P378q-P501c

This Thermo Scientific Chemicals brand product was originally part of the Alfa Aesar product portfolio. Some documentation and label information may refer to the legacy brand. The original Alfa Aesar product / item code or SKU reference has not changed as a part of the brand transition to Thermo Scientific Chemicals.

RUO – Research Use Only

Frequently asked questions (FAQs)

What instructions should I use for Graphite conductive adhesive, alcohol based?

We recommend using the following instructions for Graphite conductive adhesive, alcohol based for maximum adhesion:

Prepare the substrate surface: Before coating substrates, we recommend that they be clean and dry. You may use a solvent wipe.
Mix the adhesive: This product is supplied in its concentrated form. Please note that it is thixotropic in nature and has the tendency to gel on standing. Preparation includes thorough agitation, then dilution with isopropanol to yield the required consistency for the application of choice.
Apply the adhesive: Diluted graphite conductive adhesive may be applied with the use of a spray, brush, dip, or roller. We do recommend using a spray, as it yields the most uniform coverage.
Cure the adhesive: This product air dries within five minutes under normal temperature and humidity. Complete cure properties will develop in about two hours with consideration of film thickness and drying conditions. To achieve optimum coating qualities in a shorter curing cycle, after air drying, bake for 5 minutes at 75°C (167°F).