Dionex™ IonPac™ AS31 Analytical and Guard Columns
Actual product may vary
Dionex™ IonPac™ AS31 Analytical and Guard Columns
Dionex™ IonPac™ AS31 Analytical and Guard Columns
Dionex™ IonPac™ AS31 Analytical and Guard Columns
Dionex™ IonPac™ AS31 Analytical and Guard Columns
Thermo Scientific™

Dionex™ IonPac™ AS31 Analytical and Guard Columns

Green features

Increase your sample throughput and lab productivity with this anion-exchange column that can separate 9 haloacetic acids in drinking water in approximately 35 minutes.

Have Questions?
Change viewbuttonViewtableView
Catalog NumberLength (Metric)Particle SizeColumn Type
303147250 mm6 μmAnalytical Column
30314850 mmGuard Column
Catalog number 303147
Price (EUR)
3 280,00
Each
Length (Metric):
250 mm
Particle Size:
6 μm
Column Type:
Analytical Column
Price (EUR)
3 280,00
Each

Achieve faster separation of haloacetic acids (HAAs), bromate, and dalapon in drinking water prior to detection with ion chromatography (IC) and mass spectrometry (MS) with the new Thermo Scientific™ Dionex™ IonPac™ AS31 column. Specifically designed for fast analysis, the Dionex IonPac AS31 provides approximately 39% shorter run times relative to the Dionex IonPac AS24, reducing U.S. EPA Method 557 run time from 57 minutes to approximately 35 minutes. This new hydroxide-selective anion-exchange column has relatively high capacity to allow large loop injections for trace analysis (μg/L) without sample pre-treatment.

Superior Chromatographic Performance
  • Can meet or exceed the performance requirements of U.S. EPA Method 557.
  • High capacity (116 μeq/column) allows injection of complex matrices without overloading the column while maintaining excellent peak shapes for lower concentration analytes.
  • Requires no sample pre-treatment when determining haloacetic acids in high-ionic strength matrices.
  • Column selectivity has been optimized at an operating temperature of 15°C to ensure reproducible recovery for haloacetic acids.
Use with a High-Pressure IC system

A high-pressure IC system, such as the Thermo Scientific™ Dionex™ ICS-5000+ HPIC™ system or Dionex ICS-6000 HPIC system is required to operate this column under standard conditions.

Specifications
Anion Exchange Capacity116 μeq
Column Capacity116 μeq
Column ChemistryHydroxide
Column ConstructionPEEK
Crosslinking55% DVB
Flow Rate0.3 mL/min.
For Use With (Application)Anion Exchange
For Use With (Equipment)Dionex IonPac AG31 Microbore Guard Column
Green FeaturesFSC
HydrophobicityLow
Max. Pressure5000 psi (345 bar)
Packing MaterialEthylvinylbenzene/Divinylbenzene
Particle Size6 μm
QuantityEach
Solvent CompatibilitypH 0 to 14, 0 to 100% Organic Solvents (Acetonitrile, Methanol, 2-Propanol)
Stationary PhaseSuper Macroporous Resin
Column TypeAnalytical Column
Diameter (Metric)2 mm
FormatMicrobore
Length (Metric)250 mm
Unit SizeEach