Genexus™ Templating Strips 3-GX7 and 4 Kit
Genexus™ Templating Strips 3-GX7 and 4 Kit
Ion Torrent™

Genexus™ Templating Strips 3-GX7 and 4 Kit

The Ion Torrent Genexus Templating Strips 3-GX7 and 4 Kit provides eight each of the strips required to perform automated深入閱讀
Have Questions?
產品號碼Quantity
A468172 Runs
產品號碼 A46817
價格 (HKD)
22,160.00
Each
新增至購物車
Quantity:
2 Runs
價格 (HKD)
22,160.00
Each
新增至購物車

The Ion Torrent Genexus Templating Strips 3-GX7 and 4 Kit provides eight each of the strips required to perform automated template preparation and chip loading of two GX7 chips using the Genexus Integrated Sequencer. This kit, combined with the GX7 Chip and Genexus Coupler, supports flexible, fully automated template preparation and chip loading of libraries prepared using the Genexus Integrated Sequencer or with an alternative protocol.

As part of the Genexus Integrated Sequencer workflow, the Genexus Templating Strips 3-GX7 and 4 Kit:
• Automates template preparation and GX7 Chip loading for 200–400 base-read Ion AmpliSeq libraries
• Supports intake variability of clinical research samples in a cost-effective manner
• Maximizes flexibility with the ability to load one to four chip lanes per run
• Enables parallel processing of up to four compatible assays in a single run
• Allows fast and simple instrument setup, with less than five minutes of hands-on time

The Genexus Integrated Sequencer automates library preparation, sequencing, analysis, and reporting in a hands-off, walkaway workflow to deliver results in as little as a single day. The innovative, multilane sequencing chip is designed to enable cost-effective processing of 1 to 32 single pool libraries.
 

For Research Use Only. Not for use in diagnostic procedures.
規格
Quantity2 Runs
Unit SizeEach

常見問答集 (常見問題)

Can I use the Genexus Templating Strips 3-GX7 and 4 Kit (Cat. No. A46817) with the GX5 Chip?

No, the Genexus Templating Strips 3-GX7 and 4 Kit (Cat. No. A46817) should be used with the GX7 Chip. Each kit allows for the automated template preparation and chip loading of two GX7 chips using the Genexus Integrated Sequencer.

Find additional tips, troubleshooting help, and resources within our Next-Generation Sequencing Support Center.

What are the storage conditions for the Genexus Templating Strips 3-GX7 and 4 Kit (Cat. No. A46817)?

The Genexus Strip 3-GX7 should be stored at 2-8 degrees C and Genexus Strip 4 should be stored at -30 to -10 degrees C.

Find additional tips, troubleshooting help, and resources within our Next-Generation Sequencing Support Center.

What does the Genexus Templating Strips 3-GX7 and 4 Kit (Cat. No. A46817) consist of?

The Genexus Templating Strips 3-GX7 and 4 Kit (Cat. No. A46817) consists of 8 pairs of 3-GX7 and 4 strips, allowing for up to 2 sequencing runs per kit.

Find additional tips, troubleshooting help, and resources within our Next-Generation Sequencing Support Center.

What Genexus Software version is compatible with the GX7 Chip?

The GX7 Chip is compatible with the Genexus Software version 6.8.0 and later.

Find additional tips, troubleshooting help, and resources within our Next-Generation Sequencing Support Center.

Can the Genexus Coupler be reused?

The Genexus Coupler should not be reused. The chip and coupler should be changed together.

Find additional tips, troubleshooting help, and resources within our Next-Generation Sequencing Support Center.