Anti-Clumping Agent
Anti-Clumping Agent
Gibco™

Anti-Clumping Agent

GIBCO™ Anti-Clumping Agent는 세포 응집을 줄이는 농축 액체 시약으로 배양 현탁액(suspension)에서 생존 세포의 밀도를 높여줍니다. Anti-Clumping Agent은 부드러운, 동물 유래자세히 알아보기
Have Questions?
보기 방식 변경buttonViewtableView
카탈로그 번호수량
0010057AE20 mL
0010057DG100 mL
카탈로그 번호 0010057AE
제품 가격(KRW)
123,000
Each
카트에 추가하기
수량:
20 mL
제품 가격(KRW)
123,000
Each
카트에 추가하기
GIBCO™ Anti-Clumping Agent는 세포 응집을 줄이는 농축 액체 시약으로 배양 현탁액(suspension)에서 생존 세포의 밀도를 높여줍니다. Anti-Clumping Agent은 부드러운, 동물 유래 성분이 없는 화학적으로 규명된 (chemically defined) formulation으로 단백질, 효소, 가수분해물이나 조성이 확인되지 않은 성분은 포함되어 있지 않습니다.

• 배양 현탁액(suspension)에서의 세포 응집 감소
• 높은 생존 세포 밀도
• 동물 유래 물질 무함유, 화학적으로 규명된 (chemically defined) 성분
• 이제 대용량의 편리한 패키지도 구매할 수 있습니다.
• 패키지와 배송을 사용자에 맞게 구성할 수 있습니다.

간단하며 부드러운 세포 해리
배양 현탁액(suspension)에 적응된 cell line이 더욱 유착 또는 응집된 “clumping” 상태로 복귀될 수 있습니다. 이 때 많은 세포 해리에 사용되는 강한 효소 대신 부드러운 시약을 추가하여 배양 조건을 크게 개선시켜 응집과 유착을 감소시킬 수 있습니다. Anti-Clumping Agent는 간편하고 부드러운 농축액으로 배양 배지(대개 희석배율 1:100 ∼ 1:1000 사이로 적정)에 추가해 세포 응집을 크게 줄일 수 있습니다.

응집 감소, 생존율 증가, 단백질 발현 개선
Anti-Clumping Agent의 사용으로 감소된 세포 응집이 아래에 도시되어 있습니다(그림 1). 생존 세포 밀도 증가를 입증하는 데이터도 참조하십시오(그림 2). 생존 세포 밀도가 높을 수록 배양 조건이 안정화되어 단백질 수율이 높아집니다.

실제 세포 해리를 위해, 동물 유래 성분이 없는 TrypLE™ 제품을 추천합니다.

Transfection 후 Anti-Clumping Agent 사용
Anti-Clumping Agent가 모든 세포 배양 조건에 권장되는 것은 아닙니다. 예를 들어 지질 양이온 transfection을 사용하여 cell line을 만들 때에는 Anti-Clumping Agent가 transfection 과정을 방해할 수 있기 때문에 Anti-Clumping Agent를 transfection 후에 사용하도록 권장합니다.

동물 유래 성분 무함유, 화학적으로 규명된(chemically defined) 성분
Anti-Clumping Agent는 동물 유래 성분이 포함되지 않고 화학적으로 규명된(chemically defined) 성분으로 이루어져 있으므로, 배양 시스템에 외래 물질이 추가될 위험이 최소화됩니다. 시스템에 제대로 규명되지 않은 첨가제가 들어가지 않기 때문에 lot 간 일관성이 높은 확실한 결과를 얻을 수 있습니다.

편리한 맞춤형 포장
이전의 Anti-Clumping Agent는 20 mL bottle로만 이용할 수 있었습니다. 그러나 이제는 보다 경제적이고 편리한 100 mL bottle을 구입할 수 있습니다. 더 큰 포장의 경우에도 '장바구니 담기(Add to Cart)' 버튼 아래에 있는 '맞춤형 제품 주문(Customize this Product)' 링크를 클릭하거나 CustomMedia@lifetech.com로 이메일을 보내 구성을 지정할 수 있습니다.

추가 정보 및 지원
이 제품의 올바른 사용에 대한 추가 정보는 아래 제공된 설명서와 프로토콜을 참조하십시오. 그 외의 질문은 자사 기술 서비스 그룹으로 직접 해주시기 바랍니다.

연구용으로만 사용할 수 있습니다. 진단 절차에 사용할 수 없습니다.
사양
세포주CHO, Insect Cells, 293 (HEK)
세포 유형Mammalian Cells
배양 유형Suspension Cell Culture
형식Bottle(s)
제품라인Gibco
수량20 mL
배송 조건Room Temperature
소스Animal origin-free
분류Animal Origin-free, Chemically-defined, Protein-free, Serum-free
형태Liquid
제품 유형Anti-clumping Reagent
pH6 to 8
Unit SizeEach
구성 및 보관
Store at 2 to 8°C

자주 묻는 질문(FAQ)

How much Anti-clumping agent should I use?

Use anti-clumping agent at a dilution of 1:250 to 1:1000 in culture medium. Test for impact on the cell culture and reduce concentration as the cell clumping is reduced.

Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.

Are there any recommendations for preventing or dispersing cell clumps in a suspension culture?

When cells meant to be grown in suspension are grown in static culture, they may form clumps. These clumps will severely limit transfection efficiency and protein expression. It is suggested that FreeStyle 293 cells in FreeStyle media and CHO-S cells in CD-CHO or CHO-SFM are grown in agitated suspension to reduce the appearance of clumps. However, if clumps do form, you can try the following protocol to select for cells that don't form clumps:

- Transfer cells into an appropriate size centrifuge tube that will hold the entire cell suspension.
- Allow cells to sit undisturbed for about 5 minutes. The time can vary depending on the specific cell line. Larger cell clumps will settle to the bottom of the tube.
- Collect cells from the upper portion of the tube to passage into a new flask.

Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.

My suspension cells are clumping together. What is going on?

There are a number of factors that can contribute to this:<

1) Presence of calcium and magnesium ions. Wash cells in a balanced salt solution without calcium and magnesium. Gently pipette cells to obtain a single cell suspension.

2) Mycoplasma contamination. Segregate culture and test for mycoplasma infection. Clean hood and incubator. If culture is contaminated, discard.

3) Cell lysis and release of DNA resulting from overdigestion with proteolytic enzymes. Treat cells with DNase I.

4) Certain suspension cell type try to aggregate when they are not under optimal agitation speed and optimization is required.

5) Certain suspension cell type try to aggregate in bioreactors and it is recommended to use Anti-Clumping Agent (Cat. No. 0010057AE).

Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.

What reagents do you offer for cell dissociation, and what are the main differences between them?

Please use this selection chart that compares our cell dissociation reagents (https://www.thermofisher.com/us/en/home/life-science/cell-culture/mammalian-cell-culture/reagents/trypsin.html).

Find additional tips, troubleshooting help, and resources within ourMammalian Cell Culture Basics Support Center.