Nalgene™ PMP Griffin Low-Form Plastic Beaker
Nalgene™ PMP Griffin Low-Form Plastic Beaker
Nalgene™ PMP Griffin Low-Form Plastic Beaker
Nalgene™ PMP Griffin Low-Form Plastic Beaker
Nalgene™ PMP Griffin Low-Form Plastic Beaker
Thermo Scientific™

Nalgene™ PMP Griffin Low-Form Plastic Beaker

Thermo Scientific™ Nalgene™ PMP Griffin Low-Form Beaker는 150°C 온도에서 연속 사용하고 175°C까지 단속적으로 사용할 수 있습니다.
Have Questions?
보기 방식 변경buttonViewtableView
카탈로그 번호용량(미터법)제품 사이즈
1203-40004000 mLCase of 4
1203-005050 mLCase of 36
1203-0050PK
1203-0050으로도 사용됨
50 mLPack of 12
1203-0100100 mLCase of 36
1203-0100PK
1203-0100으로도 사용됨
100 mLPack of 12
1203-0150150 mLCase of 36
1203-0150PK
1203-0150으로도 사용됨
150 mLPack of 12
1203-0250250 mLCase of 24
1203-0250PK
1203-0250으로도 사용됨
250 mLPack of 6
1203-0400400 mLCase of 24
1203-0400PK
1203-0400으로도 사용됨
400 mLPack of 6
1203-0600600 mLCase of 12
1203-0600PK
1203-0600으로도 사용됨
600 mLPack of 4
1203-10001000 mLCase of 12
1203-1000PK
1203-1000으로도 사용됨
1000 mLPack of 3
1203-20002000 mLCase of 4
1203-2000PK
1203-2000으로도 사용됨
2000 mLEach
1203-4000PK
1203-4000으로도 사용됨
4000 mLEach
카탈로그 번호 1203-4000
제품 가격(KRW)
257,000
Case of 4
카트에 추가하기
용량(미터법):
4000 mL
Unit Size:
Case of 4
제품 가격(KRW)
257,000
Case of 4
카트에 추가하기

Thermo Scientific™ Nalgene™ PMP Griffin Low-Form Beaker는 150°C 온도에서 연속적으로 사용하고 175°C 온도까지는 단속적으로 사용할 수 있습니다. 이 폴리메틸펜텐 비이커는 유리의 투명성, 탁월한 내화학성 및 열적 내성을 가지고 있습니다. 모든 크기의 비이커에 읽기 쉽게 실크 스크린 눈금이 새겨져 있습니다.

  • 투명 PMP 재질 사용으로 비이커 내용물이 선명하게 보입니다.
  • 옆으로 흐르지 않는 단일 주둥이 디자인으로 액체를 정밀하게 흘릴 수 있습니다.
  • 골이 있어 적재가 쉽습니다.
  • 눈금, 크기 코드, 수지 코드, 카탈로그 번호, 최대 온도 및 “화기 엄금” 기호가 실크 스크린으로 새겨져 있어 식별이 쉽고 사용 안전을 높일 수 있습니다.
  • 고압살균 가능/눈금 표시/투명
  • 실험실용 플라스틱웨어 정확도에 대한 ISO/DIN 7056 국제 표준 충족
  • 가열판 위에서는 사용하지 마십시오.

    책임 보증 기간: 판매 약관에 제시된 모든 보증 요건 및 배제 조항에 따라 달라질 수 있으나 이 제품의 보증 기간은 제품을 선적한 날짜부터 이후 구십(90)일입니다.

    내부 연구 목적 사용 제한에 대한 면책 사항: 내부 연구 목적만을 위해 제품을 이용하는 구매자에 대한 어떠한 제한 사항도 이 문구와 관련된 웹 페이지의 제품에 적용되지 않습니다.

    사양
    색상Clear
    설명Beaker Griffin Low-Form PMP 4000 mL
    눈금 범위500 to 4000 mL
    증분250 mL
    수량1/Pk.; 4/Cs.
    유형Beaker
    오토클레이브 가능Autoclavable
    용량(미터법)4000 mL
    인증/규정준수ISO/DIN 7056
    일회용Reusable
    GraduatedYes
    물질PMP
    Scale500mL to 4000ml in 250mL increments
    스타일Griffin, Low Form
    Unit SizeCase of 4

    자주 묻는 질문(FAQ)

    Several of your labware products are available in polypropylene (PP, PPCO) or polymethylpentene (PMP). Which should I choose?

    These two materials were chosen as labware raw materials for their durability, broad chemical compatibility profile, and wide range of use temperature. Polymethylpentene offers a higher level of transparency (comparable to glass) but is slightly more brittle and therefore somewhat more likely than polypropylene to crack if dropped. Chemical or environmental factors in some applications may strongly indicate the use of only one material- please refer to laboratory plastics reference materials or call Thermo Scientific Laboratory Products Essentials technical support for assistance.