Temperature Chambers for HAAKE™ MARS™ Rheometers

The Thermo Scientific™ HAAKE™ MARS™ rheometer platforms feature temperature chambers which ensure reliable and accurate sample temperature during rheological measurement of melts and solids over a wide temperature range.

Temperature chambers for HAAKE MARS 40/60 and HAAKE MARS iQ Air Rheometers are available.

Both solutions offer advantages such as:

• Patented combination of convection and radiation heat transfer for fast temperature changes and homogeneous temperature distribution
• Fast sample loading, trimming and cleaning due to easy sample access
• Wide portfolio of measuring geometries

Controlled test chamber (CTC) for HAAKE MARS 40/60 Rheometer
Two independent halves provide numerous advantages for convenient sample handling and optimal access:

• Each half can be moved independently backward and sideways – no special tools needed
• When closed, the two halves automatically center themselves around the sample
• Each chamber is equipped with a window to observe the sample during measurement
• A park position feature allows the attachment of another temperature control unit without removing the CTC
• In the park position, the temperature inside the CTC can be maintained while the geometry is cleaned or the next sample is loaded

No time is wasted waiting for the CTC to reach its set temperature

• The CTC's temperature range spans from 30°C to 600°C and can be expanded down to -150°C with an optional liquid nitrogen device

Temperature chamber for HAAKE MARS iQ Rheometers
Oven with compact design

• Easily installed without additional alignment when changing between different temperature modules
• Two halves of the chamber open in a wide angle for excellent access to the measuring geometries
• Optional camera with illumination for taking pictures or videos during sample measurement

The temperature range spans from 30°C to 450°C, expandable down to:

• -150°C with an optional liquid nitrogen device.
• -50°C with a cold gas chiller

A portfolio of varies measuring geometries is available depending on the oven solution:

• Comprehensive range of parallel plate, – cone and plate or coaxial cylinder measuring geometries
• Various clamp setups for Dynamic Mechanical Thermal Analysis (DMTA)
• Sentmanat Extension Rheometer (SER) tool from Xpansion Instruments for extensional rheological investigations on polymer films
• Various tribology setups, e.g. ball on three balls for determining friction and wear of lubricants over a wide temperature range