SuperSignal™ ELISA Pico Chemiluminescent Substrate
SuperSignal™ ELISA Pico Chemiluminescent Substrate
Thermo Scientific™

SuperSignal™ ELISA Pico Chemiluminescent Substrate

Thermo Scientific SuperSignal ELISA Pico Chemiluminescent Substrate는 강한 광 신호를 생성하도록 최적화되어 있어 발광측정기 기반의 분석에서 우수한 성능을 발휘합니다.SuperSignal ELISA자세히 알아보기
Have Questions?
보기 방식 변경buttonViewtableView
카탈로그 번호수량키트 구성품
37070100 mL KitStable Peroxide Buffer, 50mL, Luminol/Enhancer, 50mL
37069250 mL KitStable Peroxide Buffer, 125mL, Luminol/Enhancer, 125mL
카탈로그 번호 37070
제품 가격(KRW)
477,000
온라인 행사
Ends: 31-Dec-2025
529,000
할인액 52,000 (10%)
Each
카트에 추가하기
수량:
100 mL Kit
키트 구성품:
Stable Peroxide Buffer, 50mL, Luminol/Enhancer, 50mL
대량 주문 또는 맞춤형 요청
제품 가격(KRW)
477,000
온라인 행사
Ends: 31-Dec-2025
529,000
할인액 52,000 (10%)
Each
카트에 추가하기
Thermo Scientific SuperSignal ELISA Pico Chemiluminescent Substrate는 강한 광 신호를 생성하도록 최적화되어 있어 발광측정기 기반의 분석에서 우수한 성능을 발휘합니다.

SuperSignal ELISA Pico Chemiluminescent Substrate의 특징:

즉각적인 광 생성—실온 또는 37°C에서 강한 신호가 즉시 생성됨. 즉, 425nm의 광 방출
높은 신호대잡음비(signal-noise ratio)—Background 최소화
낮은 피코그램(Picogram)의 민감도—ELISA에서 피코그램 수준까지 단백질 검출
실온 보관—실온 배송 및 실온 보관 조건의 제품
8시간 시약 안정성—8시간 동안 시약은 일관된 성능을 보이다가 24시간이 지나면 활성이 10%만 감소함
융통성—검정색 또는 흰색 불투명 플레이트에서 신호 판독 가능

SuperSignal ELISA Pico Chemiluminescent Substrate는 ELISA 또는 다른 모든 용액 기반 분석에서 우수한 민감도를 나타내며, 효소 검출과 정량을 위해 화학발광 기질을 사용합니다. 이 ELISA는 검사 튜브나 마이크로플레이트에서 나타날 수 있고 발광측정기에서 RLU(relative light unit)를 측정함으로써 정량화됩니다.

화학발광 기질은 검출된 빛이 효소-기질 반응이 발생하는 동안에만 존재하는 일시적인 반응 산물이라는 점에서 다른 기질과 다릅니다. 이것은 안정적인 발색 산물을 생성하는 기질과 대조적입니다. 즉, 이 발색은 효소-기질 반응이 끝난 후에도 웰에서 계속 지속됩니다.

관련 자료:
분석 개발 및 ELISA 기술 가이드
ELISA 기질 선택 가이드

관련 제품:
SuperSignal ELISA Femto Maximum Sensitivity Substrate
Blocking Buffer
Coated Microplate
For Research Use Only. Not for use in diagnostic procedures.
사양
검출 방법Chemiluminescence
키트 구성품Stable Peroxide Buffer, 50mL, Luminol/Enhancer, 50mL
제품라인SuperSignal
기질 특성Chemical Substrate
기질 유형HRP (Horseradish Peroxidase)
제품 유형ELISA Substrate
수량100 mL Kit
Unit SizeEach
구성 및 보관
Upon receipt store product at room temperature. Product shipped at ambient temperature.Introduction

자주 묻는 질문(FAQ)

What type of instrument do I use to read the plates detected with the SuperSignal ELISA Pico Chemiluminescent Substrate?

A luminometer is used to measure relative light units.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

What microplates work best with the SuperSignal ELISA Pico Chemiluminescent Substrate?

White plates provide the best signal-to-noise ratio. Black plates provide lower background but less detectable signal.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

What signal duration occurs with SuperSignal ELISA Pico Chemiluminescent Substrate?

Maximum signal is reached within five minutes and then declines slowly thereafter until it is much less after an hour.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

How sensitive is SuperSignal ELISA Pico Chemiluminescent Substrate?

The substrate allows measurement of low picogram levels in sandwich ELISA procedures.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

How does the SuperSignal ELISA Pico Chemiluminescent Substrate compare with QuantaBlu Fluorogenic Peroxidase Substrate?

QuantaBlu Fluorogenic Peroxidase Substrate is a fluorescent detection reagent for HRP and provides attamole sensitivity. SuperSignal ELISA Pico Chemiluminescent Substrate is strictly chemiluminescent.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.