MicroAmp™ Optical Adhesive Film Kit
해당 제품을 구매한 고객들이 함께 검색한 제품을 추천해드립니다. 온라인 할인 진행 중!
MicroAmp™ Optical Adhesive Film Kit
Applied Biosystems™

MicroAmp™ Optical Adhesive Film Kit

Applied Biosystems™ MicroAmp™ Optical Adhesive Film Kit에는 다음 제품이 들어있습니다.• MicroAmp™ Optical Adhesive Film은 마이크로플레이트에 이용 시 웰 간 오염과자세히 알아보기
Have Questions?
카탈로그 번호수량
43136631 kit
카탈로그 번호 4313663
제품 가격(KRW)
133,000
キャンペーン価格
Ends: 31-Dec-2025
147,000
할인액 14,000 (10%)
Each
카트에 추가하기
수량:
1 kit
제품 가격(KRW)
133,000
キャンペーン価格
Ends: 31-Dec-2025
147,000
할인액 14,000 (10%)
Each
카트에 추가하기
Applied Biosystems™ MicroAmp™ Optical Adhesive Film Kit에는 다음 제품이 들어있습니다.

• MicroAmp™ Optical Adhesive Film은 마이크로플레이트에 이용 시 웰 간 오염과 샘플 증발 가능성을 줄여줍니다.

• MicroAmp™ Optical Film Compression Pads는 접착 필름 사용 시 thermal cycler과 반응 플레이트 사이를 적절하게 열봉합할 수 있도록 만들어졌습니다.

• MicroAmp™ Adhesive Film Applicator는 마이크로플레이트와 접착 필름 사이 봉합을 확실히 하는데 사용합니다.

MicroAmp™ Optical Adhesive Film은 마이크로플레이트에 이용 시 웰 간 오염과 샘플 증발 가능성을 줄여줍니다.

• 압감 접착제가 각 well을 모두 확실히 밀봉합니다.

• 눌러 붙이기만 하면 끝: plate에 맞게 놓은 후 누르면 밀봉 완료

• 적용 용이-장갑에 붙지 않습니다.

귀중한 샘플 손실 방지
투명한 이 접착 필름으로 마이크로플레이트 well에 샘플을 밀봉하세요. 샘플 간 교차 오염 확률을 줄이고 real-time PCR 데이터의 일관성을 보장합니다.

사용의 용이성
간단히 접착 필름 뒷면을 벗기고 마이트로플레이트 위에 단단히 붙이세요. 샘플 오염 확률을 줄이며 평소와 같이 마이트로플레이트를 놓고 샘플을 확인할 수 있습니다. MicroAmp™ Optical 96-well Reaction Plate에 맞게 만들어졌습니다.

MicroAmp™ Optical Film Compression Pad는 접착 필름 사용 시 thermal cycler과 반응 플레이트 사이를 적절하게 열봉합할 수 있도록 만들어졌습니다.

MicroAmp™ Adhesive Film Applicator를 사용하여 마이크로플레이트와 접착 필름 사이를 단단히 밀봉하세요.

확실한 밀봉
MicroAmp™ Adhesive Film Applicator는 인체공학적으로 만들어져 접착 필름을 마이크로플레이트 위에 놓고 눌러 기포를 최소화하며 단단히 밀봉할 수 있게 합니다. 확실한 밀봉이 well 간 오염과 샘플 손실을 방지합니다.

빠르고 쉬운 사용
MicroAmp™ Adhesive Film Applicator를 사용해 여러 마이크로플레이트를 빠르게 밀봉하세요. 이 도구는 마이크로플레이트 직경에 따라 만들어져 마이크로플레이트를 신속히 밀봉할 수 있습니다. 자사 고유의 강력한 플라스틱은 지속적인 사용에도 내구성이 높아 대규모 스크리닝 어플리케이션을 완성할 수 있습니다.

참고: 라벨 라이선스 제한과 상표 정보는 사용자 설명서나 제품 설명서를 참조하십시오. 연구용. 진단 절차에 사용할 수 없습니다.
사양
용도(장비)2720 Thermal Cycler, 6100 Thermal Cycler, 7000 System, 7900HT System, GeneAmp 9700, QuantStudio™, ViiA™ 7 Dx System, ViiA™ 7 System, QuantStudio™ Dx
제품 유형Film, Seal, or Applicator
수량1 kit
배송 조건Room Temperature
접착제Pressure Sensitive
색상Optical
물질Polyester
웰 수96
Plate Compatibility96-well Plate
제품라인MicroAmp
Unit SizeEach
구성 및 보관
Includes: MicroAmp™ Optical Adhesive Covers (quantity 20), Applicator (quantity 1), MicroAmp™ Optical Cover Compression Pad (quantity 1)

자주 묻는 질문(FAQ)

How do I correctly apply MicroAmp Optical Adhesive Covers to an optical 96- or 384-well plate?

Please follow the instructions below for the proper application of MicroAmp Optical Adhesive Covers (Cat. Nos. 4311971, 4313663 and 4360954).

The MicroAmp Optical Adhesive Cover uses a pressure-sensitive adhesive backing to adhere the cover to the optical 96- or 384-well plate. It is imperative that you use enough force to activate the pressure-sensitive adhesive to prevent evaporation from the wells.
Please note: Users should not expect the Optical Adhesive Cover to be very sticky to the touch on the side that adheres to the optical plate.

The correct way to apply the cover is as follows:

1. Apply firm pressure when using the Adhesive Seal Applicator (Cat. No. 4333183) to press the cover onto the plate.

2. Run the applicator firmly from left to right several times. Run the applicator up and down several times.

3. Run the edge of the applicator around the border (following the red line outside the wells) of the cover.

4. Repeat the left to right and up and down motions to assure a good final seal.

5. Inspect each well to make sure that each well edges are imprinted on the optical adhesive cover.
Please Note: Using the Applicator's edge to seal between the wells is NOT recommended. It may actually pull the seal off the wells.

Find additional tips, troubleshooting help, and resources within our Real-Time PCR and Digital PCR Instruments Support Center.

Can the MicroAmp Optical Adhesive Film be used with MicroAmp Optical Tubes?

No. The Optical Adhesive Film is recommended for use only with the MicroAmp Optical 96-well Reaction Plate (with or without barcode) and MicroAmp 384-well Optical Reaction Plate.

Find additional tips, troubleshooting help, and resources within our Real-Time PCR and Digital PCR Instruments Support Center.