Mouse GAPD (GAPDH) Endogenous Control (VIC™/MGB probe, primer limited)
Mouse GAPD (GAPDH) Endogenous Control (VIC™/MGB probe, primer limited)
Applied Biosystems™

Mouse GAPD (GAPDH) Endogenous Control (VIC™/MGB probe, primer limited)

Green features
Applied Biosystems™ Mouse GAPD (GAPDH) Endogenous Control (VIC™⁄MGB Probe, Primer Limited)은 내인성 대조군으로 사용합니다. 이로 다른 발현 분석에 사용자세히 알아보기
Have Questions?
카탈로그 번호수량
4352339E2500 reactions
카탈로그 번호 4352339E
제품 가격(KRW)
1,111,000
キャンペーン価格
Ends: 31-Dec-2025
1,234,000
할인액 123,000 (10%)
Each
카트에 추가하기
수량:
2500 reactions
제품 가격(KRW)
1,111,000
キャンペーン価格
Ends: 31-Dec-2025
1,234,000
할인액 123,000 (10%)
Each
카트에 추가하기
Applied Biosystems™ Mouse GAPD (GAPDH) Endogenous Control (VIC™⁄MGB Probe, Primer Limited)은 내인성 대조군으로 사용합니다. 이로 다른 발현 분석에 사용 시 cDNA 샘플의 유전자 발현 상대 정량이 가능합니다. Probe는 VIC™ dye - MGB로 표지하고 primer가 제한되어 있습니다. Multiplex 또는 singleplex PCR 반응에 사용할 수 있습니다. 내인성 대조군은 Inventoried 및 Non-Inventoried TaqMan™ Gene Expression Assay, TaqMan™ Custom Gene Expression Assay, 및/또는 Custom TaqMan™ Primer와 Probe에 사용할 수 있습니다.

분석 정보:

유전자 기호:GAPDH
RefSeq: NM_008084.2
Probe Exon 위치:3
Amplicon 크기:107

TaqMan™ Endogenous Control

TaqMan™ Endogenous Control을 유전자 발현 정량 대조군으로 사용해 수 개월이 걸리는 분석 설계, 제형, 검사를 생략할 수 있습니다. 편리하게 미리 설계된 probe와 primer set이 함께 제공되어 반응에서 샘플 RNA 또는 DNA 양을 정규화할 수 있습니다.

유전자 발현 정량을 위한 완전한 솔루션

생물 시스템에 대한 자세한 정보가 있어도 유전자 발현 정량에 사용할 대조군을 결정하기 어려우셨습니까? 이제 TaqMan™ Endogenous Control로 많이 사용되는 human, mouse, rat, 진핵세포 유전자의 대조 선택에 시행 오차를 피할 수 있습니다.

간편한 사용

TaqMan™ Endogenous Control의 모든 성분은 QC 검사를 거쳐 단일 20X mix로 만들어졌으며 기능 검사를 완료하였습니다. 이 대조군은 사용이 간편할 뿐아니라 2단계 RT-PCR의 보편적 조건에 완벽히 호환됩니다. 단지 TaqMan™ Universal PCR Master Mix (AmpErase™ UNG 유무와 무관)와 cDNA 샘플을 첨가하면 Applied Biosystems 7900HT, 7300, 7500 Real-Time PCR Systems, 및 7000, 7700 Sequence Detection Systems 등 Applied Biosystems 기기에서 민감도와 재현성 높은 진정한 정량 유전자 발현 데이터를 생성할 수 있습니다.

다양한 제공

본사는 입증된 5' nuclease chemistry을 이용해 각 내인성 대조군을 만듭니다. 활용도를 높이기 위해 두 가지 다른 reporter dye와 두 가지 quencher를 선택할 수 있습니다.
• FAM™ dye-labeled TaqMan™ MGB probe (250nM, 최종 농도) 및 unlabeled PCR primers 2개(각 900nM)
• VIC™ dye-labeled TaqMan™ MGB probe (250nM, 최종 농도) 및 unlabeled PCR primers 2개 (각 150nM, y primer limited)
• VIC™ dye-labeled TAMRA™ probe (250nM, 최종 농도) 및 unlabeled PCR primers 2개(각 150nM, y primer limited)

올바른 내인성 대조 선택

내인성 대조군은 PCR 반응 시 well에 넣는 cDNA 양의 차이를 보정하여 표적 유전자의 발현 수준을 정규화할 수 있습니다. 최선의 결과를 위해 이 내인성 대조군이 검사 샘플 세트와 일관적으로 발현되는지 확인해야 합니다. 내인성 대조군의 발현은 연구의 모든 샘플에서 균일해야 합니다. Multiplexing에서는 내인성 대조군의 유전자 발현 수준이 표적보다 높은지 확인합니다.

Multiplex vs. Singleplex PCR

VIC™ reporter dye로 표지된 probe를 가지고 있는 모든 TaqMan™ Endogenous Control은 primer가 제한적입니다. 이는 표적 유전자 발현 분석에서 TaqMan™ Endogenous Control multiplexing으로 대조 유전자가 표적 유전자보다 더 많이 발현되게 됩니다. FAM™ reporter dye로 표지된 probe를 가진 모든 TaqMan™ Endogenous Control은 primer가 제한되지 않으며 multiplexing 용이 아닙니다.

연구용으로만 사용할 수 있습니다. 진단 절차에 사용할 수 없습니다.
For Research Use Only. Not for use in diagnostic procedures.
사양
등록 번호NM_008084.2
앰플리콘 크기107
형식Tube
유전자 기호GAPDH
그린 기능Sustainable packaging
반응 수2500 Reactions
제품라인TaqMan, VIC
수량2500 reactions
배송 조건Room Temperature
Mouse
타겟GAPDH
농도20X
검출 방법Primer-probe
용도(애플리케이션)Gene Expression
라벨 또는 염료VIC
PCR 방법2-step RT-qPCR
Unit SizeEach
구성 및 보관
Control Primer-Probe Set(s)

자주 묻는 질문(FAQ)

What are the key features of a TaqMan MGB probe?

TaqMan MGB probes have a nonfluorescent quencher at the 3´ end and a minor groove binder at the 3´ end that increases the melting temperature (Tm) of probe, allowing the use of shorter probes.  For more information on MGB probes, please consult the following manual: "Primer Express v1.5 and TaqMan MGB Probes for Allelic Discrimination: All PCR Instruments: User Bulletin." You can find a copy on our website by entering this title in the main search box.

When using the TaqMan Gene Signature Plates, should I mix the reactions after adding the master mix and template to the wells containing lyophilized primers and probe?

No, but it is recommended that the plate be centrifuged to draw down the liquid to the bottom of the wells.

What are your recommendations for the best way to dilute and store my TaqMan probe?

The probe should be diluted in TE buffer [10 mM Tris-HCl, pH 8.0 (at 25°C), 1 mM EDTA]. We recommend storing your probes, both stocks and working solutions, at -20°C in aliquots. This is to cut down on the number of times the probe is subject to freeze-thaws. For detailed information on diluting primers and probes, please refer to the tutorial entitled "Reconstituting and Diluting Primers and TaqMan Probes". You can find it on our website by entering this title in the main search field.

Find additional tips, troubleshooting help, and resources within ourTaqMan Primers and Probes Support Center.