DS-33 GeneScan™ Installation Standards with GeneScan™ 600 LIZ™ Size Standard v2.0

Applied Biosystems™

DS-33 GeneScan™ Installation Standards with GeneScan™ 600 LIZ™ Size Standard v2.0

DS-33 GeneScan™ Installation Standard는 6-FAM™, VIC™, NED™ 및 PET™ dye로 표지된 통합 PCR 산물로 이루어집니다. 이 통합 산물을 생성하기 위해자세히 알아보기

카탈로그 번호	수량
4376911	1 kit

카탈로그 번호 4376911

제품 가격(KRW)

972,000

카트에 추가하기

1 kit

제품 가격(KRW)

972,000

카트에 추가하기

DS-33 GeneScan™ Installation Standard는 6-FAM™, VIC™, NED™ 및 PET™ dye로 표지된 통합 PCR 산물로 이루어집니다. 이 통합 산물을 생성하기 위해 CEPH individual 1347-02 genomic DNA를 선정 microsatellite loci를 증폭하는 형광 PCR primer 8쌍(제품 동봉 설명서에 명시)으로 증폭하였습니다. 이 kit에는 GeneScan™ 600 LIZ™ Size Standard 2.0 시험관도 들어있습니다.

이 제품은 연구용으로만 사용가능합니다. 치료 또는 진단 목적으로 동물이나 인간에 사용할 수 없습니다.

For Research Use Only. Not for use in diagnostic procedures.

용도(장비)3730xl DNA Analyzer, SeqStudio Genetic Analyzer, 3500 Genetic Analyzer, 3730 DNA Analyzer, 3500xL Genetic Analyzer

라벨 또는 염료FAM, LIZ, NED, PET, VIC

제품라인GeneScan, LIZ

제품 유형Installation Standard

수량1 kit

배송 조건Dry Ice

테스트 시간Standard

형식Tube

Unit SizeEach

구성 및 보관

Each kit contains four tubes of GeneScan™ Installation Standard DS-33 and one tube of GeneScan™ 600 LIZ™ size standard v2.0.
Store the DS-33 tubes at -25° to -15°C
Store the GeneScan 600 LIZ Size Standard v2.0 opon thawing at 2@deg; to 8°C, protect from light.

자주 묻는 질문(FAQ)

What does the SeqStudio Starter Kit (PN A35000) contain?

The SeqStudio Starter Kit (PN A35000) includes:
- SeqStudio Integrated Capillary Protector (Cat. No. A31923)
- SeqStudio Cathode Buffer Container (Cat. No. A33401)
- Sequencing Standard, BigDye Terminator v3.1, for 3500/SeqStudio Flex (Cat. No. 4404312)
- DS-33 GeneScan Installation Standards with GeneScan 600 LIZ Size Standard v2.0 (Cat. No. 4376911)
- Hi-Di Formamide (Cat. No. 4401457)
- MicroAmp Optical 96-Well Reaction Plate with Barcode (Cat. No. 4306737)
- MicroAmp 96-Well Tray/Retainer Set (Cat. No. 403081)
- MicroAmp Optical 8-Tube Strip, 0.2 mL (Cat. No. 4316567)
- Nuclease-Free Water (not DEPC-Treated) (Cat. No. AM9930)
- Cathode Buffer Container Reservoir Septa for SeqStudio Genetic Analyzer (Cat. No. A35640)
- 96-well Septa for SeqStudio Genetic Analyzer (Cat. No. A35641)
- 8-strip Septa for SeqStudio Genetic Analyzer (Cat. No. A35643)
- SeqStudio Cartridge v2 (PN A41328) (if this component is ordered online the catalog number is A41331)

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

When I started my run on the Applied Biosystems 3500/3500xL Genetic Analyzer, an error occurred: "Unstable Electrophoresis current detected, check for air bubbles" but I don't see any bubbles. What else can cause this?

Some of the other causes of an Unstable Electrophoresis current detected error message are:

1.Leak on the system
2. Polymer that:
-Has expired
-Has been left on the instrument for more than the recommended time
-Is a mixture of expired polymer and non-expired polymer
3. Running Buffer that was:
-On the instrument longer than 2 weeks
-Not filled to the fill line or evaporated below the fill line
4. An arcing event that was not cleaned afterwards using the water wash wizard
5. Not performing regular maintenance on the instrument
6. Hardware issues

Inspect the system for leaks. If you do not see any leaks on the system, perform the wash the pump chamber and channels wizard using the conditioning pouch and place fresh, non-expired polymer and fresh Anode and Cathode buffer containers. If the problem persists, a service call may be required.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

Do I need to replace the buffer every 14 days if the Applied Biosystems 3500/3500xL Genetic Analyzer is not in use?

If the instrument is not in use, it is not necessary to replace the buffer every 14 days. However, the buffer level needs to remain at the fill line to prevent the capillary or array from drying out. Top off the buffer volume with water if necessary. Replace the anode and cathode buffer containers prior to starting a new run.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.