High-Capacity RNA-to-cDNA™ Kit
해당 제품을 구매한 고객들이 함께 검색한 제품을 추천해드립니다. 온라인 할인 진행 중!
High-Capacity RNA-to-cDNA™ Kit
Applied Biosystems™

High-Capacity RNA-to-cDNA™ Kit

High Capacity RNA-to-cDNA 키트는 TaqMan Gene Expression 마스터 믹스, Power SYBR Green PCR 마스터 믹스, 그리고 그 외 PCR 효소들을자세히 알아보기
Have Questions?
보기 방식 변경buttonViewtableView
카탈로그 번호반응 수
438740650 Reactions
4388950500 Reactions
카탈로그 번호 4387406
제품 가격(KRW)
368,000
Online offer
Ends: 31-Dec-2025
408,000
할인액 40,000 (10%)
Each
카트에 추가하기
반응 수:
50 Reactions
제품 가격(KRW)
368,000
Online offer
Ends: 31-Dec-2025
408,000
할인액 40,000 (10%)
Each
카트에 추가하기
High Capacity RNA-to-cDNA 키트는 TaqMan Gene Expression 마스터 믹스, Power SYBR Green PCR 마스터 믹스, 그리고 그 외 PCR 효소들을 사용하여 최적의 퍼포먼스를 제공하는 최신 역전사 키트입니다.

특징:
빠른 속도—짧은 반응 시간 (일반적으로 30–60 분)
편리함—단 몇 번의 피펫팅 만으로 진행이 용이한 워크플로우 (2 tubes)
신뢰성—타켓의 양이 풍부하든 제한적이든 Reverse transcription이 가능합니다.
유연성—최적화된 2-단계 프로토콜로 다수의 PCR 반응에서부터 단일 역전사 반응까지 가능합니다.

검출 민감도를 그대로 유지하면서 귀하의 cDNA 합성을 진행하실 수 있습니다.
Two-tube 키트는 템플릿의 양에 상관없이 민감하고 특정한 역전사를 제공합니다. RNA 농도 표준의 희석 증폭은 11 orders of magnitude (10^11) 배의 탁월한 역전사 및 PCR 효율을 제공합니다. 이렇게 폭넓은 범위를 제공하여, 하나의 반응 조건을 활성이 강한 유전자부터 약하게 발현되는 유전자까지 모두 전사 검출이 가능하도록 지원합니다. Two-tube formulation은 High Capacity cDNA Reverse Transcription 키트 보다 반응 시간이 짧고 더 적은 피펫 작업으로 높은 퍼포먼스를 보여줍니다.
For Research Use Only. Not for use in diagnostic procedures.
사양
최종 제품 유형First-Strand cDNA
형식Kit
반응 수50 Reactions
최적 반응 온도37°C
수량50 reactions
반응 형식Premixed Components
시약 유형Reverse Transcription
역전사 효소MultiScribe
리보뉴클레아제 H 활성Yes
배송 조건Dry Ice
크기(최종 제품)Up to 7 kb
시작 물질RNA
기술Reverse Transcription
용도(애플리케이션)Real Time PCR (qPCR), RT-PCR
반응 속도30 to 60 min.
Unit SizeEach
구성 및 보관

• 20X Enzyme mix (1 x 50 μL)
• 2X RT Buffer Mix (1 x 500 μL)

Store at –15 to –25°C.
Buffer Mix may be stored at 2–8°C for up to 6 months.

자주 묻는 질문(FAQ)

How long can I store the cDNA from my reverse transcription step?

You can store your cDNA at 2-6 degrees C for up to 24 hours. For long-term storage, store the cDNA at -15 to -25 degrees C and add EDTA to a final concentration of 1 mM to prevent degradation.

Can I order the RNase Inhibitor from the High-Capacity cDNA Reverse Transcription Kit separately?

Yes. You can order the RNase Inhibitor separately as Cat. No. N8080119.

What type of primers are in the High-Capacity RNA-to-cDNA Kit?

The High Capacity RNA-to-cDNA Kit includes a 2X RT buffer mix, which is composed of dNTPs, random octamers, and oligo(dT)16.

When using the PowerUp SYBR Green Master Mix (Cat. No. A25741, A25742, A25743, A25776, A25777, A25778, A25779, A25780, A25919), I get high Ct values. What can I do?

It could be due to the following reasons:

  • Insufficient cDNA template is present. Use 10 to 100 ng of cDNA template per 50 µL reaction.
  • Quality of cDNA template is poor. Quantify the amount of cDNA template and test the cDNA template for the presence of PCR inhibitors.
  • Sample degradation. Prepare fresh cDNA, then repeat the experiment.
  • Reduced number of PCR cycles in the thermal cycling protocol. Increase the number of PCR cycles to the default setting of 40.
  • Primer-dimer formation and residual polymerase activity. Prepare the reaction mixes and reaction plate on ice. To ensure optimal results, run the reaction plate as soon as possible after completing the reaction setup.


Find additional tips, troubleshooting help, and resources within our Real-Time PCR and Digital PCR Applications Support Center.

When using the PowerUp SYBR Green Master Mix (Cat. No. A25741, A25742, A25743, A25776, A25777, A25778, A25779, A25780, A25919), the Multicomponent signal for ROX is not linear. What could cause this?

This could be due to the following reasons:

  • Pure dye component’s spectra are incorrect. Rerun pure dye spectra.
  • Incorrect dye components have been chosen. Choose correct dyes for data analysis.


Find additional tips, troubleshooting help, and resources within our Real-Time PCR and Digital PCR Applications Support Center.