Conditioning Reagent, for 3500/SeqStudio™ Flex
Product Image
Applied Biosystems™

Conditioning Reagent, for 3500/SeqStudio™ Flex

3500 series conditioning reagent은 즉시 사용이 가능한 pouch 형태로 제공되며 polymer pump priming과 polymer type 변경 사이 polymer pump 세척용으로자세히 알아보기
Have Questions?
카탈로그 번호수량
43937181 unit
카탈로그 번호 4393718
제품 가격(KRW)
72,000
Each
카트에 추가하기
수량:
1 unit
제품 가격(KRW)
72,000
Each
카트에 추가하기
3500 series conditioning reagent은 즉시 사용이 가능한 pouch 형태로 제공되며 polymer pump priming과 polymer type 변경 사이 polymer pump 세척용으로 기기 작동 중지 중에 사용합니다. 이 pouch는 1회 사용에 적당한 양입니다. RFID(radio frequency identification) 태그가 라벨에 통합되어 있습니다. pouch fitment 끝은 플라스틱 필름으로 봉합되어 있어 기기 설치 전에 제거해야 합니다.

이 제품은 연구용으로만 사용가능합니다. 진단 절차에 사용할 수 없습니다.

본 제품은 냉장/냉동제품으로 반송된 제품은 전량 폐기 처리 되오니 주문 전 상세 내용 다시 한번 확인 부탁드립니다.
For Research Use Only. Not for use in diagnostic procedures.
사양
용도(장비)3500 Series Genetic Analyzers, SeqStudio Flex Series Genetic Analyzers
형식Pouch
제품 유형Conditioning Reagent
수량1 unit
배송 조건Wet Ice
시작 물질DNA
Unit SizeEach
구성 및 보관
Store pouches at 2 to 8°C.

자주 묻는 질문(FAQ)

When I started my run on the Applied Biosystems 3500/3500xL Genetic Analyzer, an error occurred: "Unstable Electrophoresis current detected, check for air bubbles" but I don't see any bubbles. What else can cause this?

Some of the other causes of an Unstable Electrophoresis current detected error message are:

1.Leak on the system
2. Polymer that:
-Has expired
-Has been left on the instrument for more than the recommended time
-Is a mixture of expired polymer and non-expired polymer
3. Running Buffer that was:
-On the instrument longer than 2 weeks
-Not filled to the fill line or evaporated below the fill line
4. An arcing event that was not cleaned afterwards using the water wash wizard
5. Not performing regular maintenance on the instrument
6. Hardware issues

Inspect the system for leaks. If you do not see any leaks on the system, perform the wash the pump chamber and channels wizard using the conditioning pouch and place fresh, non-expired polymer and fresh Anode and Cathode buffer containers. If the problem persists, a service call may be required.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

Do I need to replace the buffer every 14 days if the Applied Biosystems 3500/3500xL Genetic Analyzer is not in use?

If the instrument is not in use, it is not necessary to replace the buffer every 14 days. However, the buffer level needs to remain at the fill line to prevent the capillary or array from drying out. Top off the buffer volume with water if necessary. Replace the anode and cathode buffer containers prior to starting a new run.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.