Thermo Scientific™ Mr. Frosty™ Freezing Container
Thermo Scientific™ Mr. Frosty™ Freezing Container
Thermo Scientific™

Thermo Scientific™ Mr. Frosty™ Freezing Container

분당 -1°C에 근접하는 냉각 속도를 지원하는 Thermo Scientific™ Mr. Frosty™ Container를 이용하여 1 ∼ 5mL 튜브에 담긴 세포를 냉각시키십시오.
Have Questions?
보기 방식 변경buttonViewtableView
카탈로그 번호보유
5100-000118 Tubes (1.0 to 2.0 mL)
5100-003612 Tubes (3.6 mL)
5100-005012 Tubes (4.5 to 5.0 mL)
카탈로그 번호 5100-0001
제품 가격(KRW)
172,000
Each
카트에 추가하기
보유:
18 Tubes (1.0 to 2.0 mL)
제품 가격(KRW)
172,000
Each
카트에 추가하기

Thermo Scientific™ Mr. Frosty™ Freezing Container를 이용하여 1 ∼ 5mL 크기의 튜브에 담긴 세포를 동결시키십시오. 사용이 간편한 이 시스템은 세포 보존에 이상적인 속도인 분당 -1°C에 근접하는 냉각 속도를 지원합니다.

특징:

  • 12 ∼ 18개의 튜브를 넣을 수 있고 86 또는 151mm(3-7/16 ∼ 5-5/16 인치)의 높이를 가지고 있어 냉각 과정에서 귀중한 냉동고 공간 절약
  • 스크류 방식의 상단 덮개가 있어 실수로 용기를 기울이더라도 시료가 내부에서 빠져 나오지 않음
  • 급조하여 만든 불안정한 폼 용기 장치 사용 해소
  • 사용 편리성—100% 이소프로필 알코올과 기계식 냉동고만 필요
  • 알코올 비접촉: 위킹(wicking) 없음, 라벨이 벗겨지지 않음, 튜브 필기에 불편 없음

주문 정보:
용기에 4.75 인치 직경(120mm)의 마개가 있음

요구 사항:
이소프로필 알코올 및 기계식 냉동고

보증:
90일

내부 연구 목적 사용 제한에 대한 고지사항:
내부 연구 목적만을 위해 제품을 이용하는 구매자에 대한 어떠한 제한 사항도 이 문구와 관련된 웹 페이지의 제품에 적용되지 않습니다.

사양
직경(미터법)117 mm
높이(미터법)86 mm
용량(미터법)2 mL
색상Clear, Blue Lid
보유18 Tubes (1.0 to 2.0 mL)
물질Polycarbonate
온도 범위-1°C
유형Freezing Container
Unit SizeEach

자주 묻는 질문(FAQ)

At what temperature should my Mr. Frosty controlled rate cell freezing container be when I start freezing cells?

For best cooling rate performance, the entire system should be at room temperature just prior to freezing.

Should I retain or discard the foam insert in my Mr. Frosty controlled rate cell freezing container?

The white foam insert serves no purpose other than to make the printed instructions on the jar easier to read. Its presence or absence will not affect the cooling rate, and so it can be discarded.

Why is it recommended that I change the isopropanol in my Mr. Frosty controlled rate cell freezing container after every 5 uses?

The Mr. Frosty system depends on the specific heat capacity of alcohol in order to provide the optimum cooling rate of 1 degree Celsius per minute. After several cooling and warming cycles, enough vapor condensation has taken place that much of the alcohol in the reservoir has been replaced by water, which affects the heat capacity of the assembled unit such that the cooling rate may be affected.