Search
Labconco Acid-Resistant CentriVap Centrifugal Vacuum Concentrator
Components in the vapor path are constructed of corrosion-resistant materials for long life.
| 카탈로그 번호 | 챔버 재질 |
|---|---|
| 7810033 LABCONCO-7810033-EACH으로도 사용됨 | PTFE-coated Aluminum |
카탈로그 번호 7810033
LABCONCO-7810033-EACH으로도 사용됨
제품 가격(KRW)
-
챔버 재질:
PTFE-coated Aluminum
Using centrifugal force, vacuum and controlled heat, the Acid-Resistant CentriVap Vacuum Concentrator rapidly concentrates multiple small samples containing chemicals such as 0.1 to 1% TFA, hydrochloric acid, acetic acid, hydrobromic acid, ammonium hydroxide and sodium hydroxide. Components in the vapor path are constructed of corrosion-resistant materials for long life.
- Brushed stainless steel and glacier white, epoxy-coated steel exterior with blue accents.
- Glass lid.
- Lid latch with safety sensor.
- Phenol-free lid gasket.
- PTFE-coated aluminum chamber with Hastelloy shaft.
- 300-watt heater.
- Microprocessor-controlled programming for run time from 1 to 999 minutes, heat from OFF to HI (100°C) in one degree increments, and heat time from 1 to 999 minutes. Memory stores 1 to 9 programs.
- LCD for display of program number, actual and set point temperature, heater time remaining, and run time remaining.
- Control panel with RUN/STOP button, PREHEAT button, set point SELECT button, increase/decrease buttons, and 3 Quick-Start buttons.
- Centrifugal motion is provided by a brushless motor capable of achieving up to 1725 rpm.
- Quick-Stop System to stop vacuum pump, open valve to bleed air into the chamber and stop the rotor within seconds after time expires or RUN/STOP button is pressed.
- Automatic vacuum release valve.
- Built-in vacuum delay allows rotor to achieve speed before applying vacuum.
- Audible alarm to signal completion of set point run time.
- 1/2 in. OD aluminum hose fitting for connection to vacuum tubing. Vacuum pump is not included.
- Vacuum port with quick disconnect fitting for 1/4 in. ID tubing.
- 115 volt models have a 115 volt electrical receptacle on the back to connect accessory vacuum pump to the system.
- 230 volt models have a reverse IEC electrical receptacle on the back to connect accessory vacuum pump to the system.
- 115 volt models have a 6.5-foot, 3-wire cord with NEMA 5-15 plug.
- 230 volt models have an 8-foot cord with NEMA 6-15 plug.
- Overall dimensions with closed lid: 14.7 in. wide x 19.3 in. deep x 11.7 in. high (37.3 x 49.0 x 29.7 cm).
- Actual weight 45 lbs. (20 kg). Shipping weight 65 lbs. (29 kg).
사양
깊이(영국식 단위)19.3 in.
깊이(미터법)49 cm
치수(길이 x 폭 x 높이)19.3 x 14.7 x 11.7 in.
높이(영국식 단위)11.7 in.
높이(미터법)29.7 cm
중량(영국식 단위)65.0 lb.
중량(미터법)29.0 kg
폭(영국식 단위)14.7 in.
폭(미터법)37.3 cm
챔버 재질PTFE-coated Aluminum
Unit SizeEach