20X Bolt™ MOPS SDS Running Buffer
20X Bolt™ MOPS SDS Running Buffer
Invitrogen™

20X Bolt™ MOPS SDS Running Buffer

Bolt MOPS SDS Running Buffer (20X) is formulated for running proteins on Bolt Bis-Tris Plus gels. It is recommended for자세히 알아보기
Have Questions?
보기 방식 변경buttonViewtableView
카탈로그 번호수량
B0001025 L
B0001500 mL
카탈로그 번호 B000102
제품 가격(KRW)
459,000
온라인 행사
Ends: 31-Dec-2025
539,000
할인액 80,000 (15%)
Each
카트에 추가하기
수량:
5 L
제품 가격(KRW)
459,000
온라인 행사
Ends: 31-Dec-2025
539,000
할인액 80,000 (15%)
Each
카트에 추가하기
Bolt MOPS SDS Running Buffer (20X) is formulated for running proteins on Bolt Bis-Tris Plus gels. It is recommended for separating medium- to large-sized proteins.

Use the right buffer to optimize protein separations
Bolt MES SDS Running Buffer and Bolt MOPS SDS Running Buffer can both be used with Bolt Bis-Tris Plus gels. MES has a lower pKa than MOPS, making the MES SDS Running Buffer faster than the MOPS SDS running buffers. The difference in ion migration affects stacking and results in a difference in protein separation range between these buffers. Use of MOPS buffer allows proteins to run slower than when using MES buffer.

Compare protein migration patterns using MES and MOPs on Bolt Bis-Tris Plus gels

See all available buffers and reagents available for SDS-PAGE

For Research Use Only. Not for use in diagnostic procedures.
사양
화학물질 이름 또는 재질Running Buffer
권장 스토리지MOPS SDS Running Buffer (20X).

Store at 4°C to 25°C.

Shelf-life is 6 months, when stored properly.
농도20X
용도 (장비)Bolt
물리적 형태Liquid
제품라인Bolt
수량5 L
Unit SizeEach

자주 묻는 질문(FAQ)

Can I prepare my protein sample with the reducing agent and store it for future use?

DTT is not stable, so it must be added and the reduction performed just prior to loading your samples.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.

My LDS or SDS sample buffer precipitates when stored at 4 degrees C. Can I warm it up? Can I store it at room temperature?

Precipitation of the LDS or SDS at 4 degrees C is normal. Bring the buffer to room temperature and mix until the LDS/SDS goes into solution. If you do not want to wait for it to dissolve, you can store the sample buffer at room temperature.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.

What are the storage conditions for Bolt gels?

Similar to NuPAGE gels with storage temperatures of 4 to 25 degrees C.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

What is the shelf life for Bolt gels?

The shelf life for Bolt gels is similar to that for NuPAGE gels: 12 months from the date of shipment.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

How are Bolt gels different than NuPAGE gels?

While they are both Bis-Tris based gels, the chemistries are very different since Bolt gels are optimized for western blotting. Another key difference is the wedge well design of the Bolt gels, which allows larger sample volumes to be loaded.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.

View all 20X Bolt™ MOPS SDS Running Buffer, 5 L FAQs