Mini Blot Module

Invitrogen™

Mini Blot Module

The Mini Blot Module is a wet transfer device used exclusively with the Mini Gel Tank. The tank accommodates one자세히 알아보기

카탈로그 번호	수량
B1000	1 unit

카탈로그 번호 B1000

제품 가격(KRW)

947,000

온라인 행사

Ends: 31-Dec-2025

1,052,000

할인액 105,000 (10%)

카트에 추가하기

1 unit

제품 가격(KRW)

947,000

온라인 행사

Ends: 31-Dec-2025

1,052,000

할인액 105,000 (10%)

카트에 추가하기

The Mini Blot Module is a wet transfer device used exclusively with the Mini Gel Tank. The tank accommodates one blot module per chamber, or two blot modules total with the side-by-side layout. The Mini Blot Module is compatible all Invitrogen mini gels (blot size: 8.5 cm x 8 cm). The blot module accommodates one mini gel per wet transfer. The universal connection and molded gasket make the module easy to use, while the inner core of the module allows for use of less methanol-based transfer buffer per wet transfer (250 mL per gel). At the recommended conditions and constant voltage, proteins can be transferred to nitrocellulose or PVDF membranes typically in 30 to 60 minutes.

See all available transfer systems ›

For Research Use Only. Not for use in diagnostic procedures.

그린 기능Energy efficient, Less hazardous

수량1 unit

작동 치수Vertical

용량≤2 Blot Modules/Mini-Gel Tank, 1 Mini-Gel/Blot Module

용도(애플리케이션)Wet Transfer

용도 (장비)Mini Gel Tank

Gel CompatibilityMini Precast Protein Gels

젤 크기Mini (8 x 8 cm)

Membrane CompatibilityNitrocellulose, PVDF

Mode of TransferWet

유형Blot Module

Unit SizeEach

구성 및 보관

Mini Blot Module
Blotting Tweezer
Blotting Roller
4 Blotting Sponges

자주 묻는 질문(FAQ)

Can I prepare my protein sample with the reducing agent and store it for future use?

DTT is not stable, so it must be added and the reduction performed just prior to loading your samples.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.

My LDS or SDS sample buffer precipitates when stored at 4 degrees C. Can I warm it up? Can I store it at room temperature?

Precipitation of the LDS or SDS at 4 degrees C is normal. Bring the buffer to room temperature and mix until the LDS/SDS goes into solution. If you do not want to wait for it to dissolve, you can store the sample buffer at room temperature.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.

What are the storage conditions for Bolt gels?

Similar to NuPAGE gels with storage temperatures of 4 to 25 degrees C.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

What is the shelf life for Bolt gels?

The shelf life for Bolt gels is similar to that for NuPAGE gels: 12 months from the date of shipment.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

How are Bolt gels different than NuPAGE gels?

While they are both Bis-Tris based gels, the chemistries are very different since Bolt gels are optimized for western blotting. Another key difference is the wedge well design of the Bolt gels, which allows larger sample volumes to be loaded.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.

View all Mini Blot Module FAQs