Bolt™ Antioxidant
Bolt™ Antioxidant
Invitrogen™

Bolt™ Antioxidant

Bolt Antioxidant prevents sample reoxidation and maintains proteins in a reduced state during protein gel electrophoresis and protein transfer. It자세히 알아보기
Have Questions?
카탈로그 번호수량
BT000515 ml
카탈로그 번호 BT0005
제품 가격(KRW)
58,000
Each
카트에 추가하기
수량:
15 ml
제품 가격(KRW)
58,000
Each
카트에 추가하기
Bolt Antioxidant prevents sample reoxidation and maintains proteins in a reduced state during protein gel electrophoresis and protein transfer. It is added to the running buffer when performing protein gel electrophoresis under reducing conditions. Bolt Antioxidant migrates with reduced proteins to maintain reducing conditions and to prevent reoxidation of sensitive amino acids such as methionine and tryptophan.

Bolt Antioxidant should be used with samples reduced using Bolt Sample Reducing Agent or other reducing agents. It is optimized for the neutral pH of Bolt gels and is not compatible with other gel chemistries. Bolt Antioxidant may also be added to Bolt Transfer Buffer to enhance transfer of proteins to membranes.

See all available buffers and reagents available for SDS-PAGE

For Research Use Only. Not for use in diagnostic procedures.
사양
버퍼Antioxidant
형태Liquid
수량15 ml
Gel CompatibilityBolt Bis-Tris Plus Gel
제품라인Bolt
제품 유형Antioxidant
Unit SizeEach
구성 및 보관
Store at 4°C.

자주 묻는 질문(FAQ)

Can I prepare my protein sample with the reducing agent and store it for future use?

DTT is not stable, so it must be added and the reduction performed just prior to loading your samples.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.

My LDS or SDS sample buffer precipitates when stored at 4 degrees C. Can I warm it up? Can I store it at room temperature?

Precipitation of the LDS or SDS at 4 degrees C is normal. Bring the buffer to room temperature and mix until the LDS/SDS goes into solution. If you do not want to wait for it to dissolve, you can store the sample buffer at room temperature.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.

What are the storage conditions for Bolt gels?

Similar to NuPAGE gels with storage temperatures of 4 to 25 degrees C.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

What is the shelf life for Bolt gels?

The shelf life for Bolt gels is similar to that for NuPAGE gels: 12 months from the date of shipment.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

How are Bolt gels different than NuPAGE gels?

While they are both Bis-Tris based gels, the chemistries are very different since Bolt gels are optimized for western blotting. Another key difference is the wedge well design of the Bolt gels, which allows larger sample volumes to be loaded.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.