NanoDrop™ Reagents
NanoDrop™ Reagents
Thermo Scientific™

NanoDrop™ Reagents

Certified standards for verifying instrument performance to factory specifications are available separately.
Have Questions?
보기 방식 변경buttonViewtableView
카탈로그 번호유형
CHEM-PR1-KITNanoDrop PR-1 Reconditioning Kit
CHEM-CF-1수용성 중크롬산 칼륨(K2Cr207) 용액
CHEM-CF-8보정 확인 키트
CHEM-PV-1PV-1 Performance Verification
CHEM-PV-8PV-8 Performance Verification
카탈로그 번호 CHEM-PR1-KIT
제품 가격(KRW)
-
유형:
NanoDrop PR-1 Reconditioning Kit

공장 사양에 따른 계측기 성능을 검증하기 위한 인증 표준은 별도로 제공됩니다.

CHEM-PV-1: PV-1 성능 검증 솔루션

CHEM-PV-1: PV-1 성능 검증 솔루션
인증된 흡광도 값이 있는 솔루션.
올바른 광도 성능 기록을 만드는 데 사용.
단일 사용 전용.
 

CHEM-PV-8: PV-8 성능 검증 키트

NanoDrop Eight와 함께 사용.
인증된 흡광도 값이 있는 솔루션.
올바른 광도 성능 기록을 만드는 데 사용.
단일 사용 전용.
 

CHEM-CF-1: CF-1 교정 유체

NanoDrop 1000, NanoDrop 2000/2000c, NanoDrop Lite와 함께 사용
인증된 흡광도 값이 있는 솔루션.
올바른 광도 성능 기록을 만드는 데 사용.
단일 사용 전용.
 

CHEM-CF-8: CF-8 교정 검사 키트

NanoDrop 8000과 함께 사용
인증된 흡광도 값이 있는 용액.
올바른 광도 성능 기록을 만드는 데 사용.
일회용.
 

CHEM-PR1-KIT: PR-1 Reconditioning 키트

모든 NanoDrop 모델에 사용
샘플 측정 받침대가 “비활성화&rquo; 된 경우 소수성 상태로 재생하는 데 유용합니다(자세한 내용은 사용 설명서 참조). PR-1 키트는 특별히 제형된 화합물이 들어 있는 작은 나사 캡 바이알과 편리한 도포기 25개로 구성되어 있습니다.
NanoDrop One/OneC 및 NanoDrop Lite Plus와 함께 사용.
인증된 흡광도 값이 있는 솔루션.
올바른 광도 성능 기록을 만드는 데 사용.
단일 사용 전용.

사양
용도(장비)모든 Thermo Scientific NanoDrop Spectrophotometer
유형NanoDrop PR-1 Reconditioning Kit
Unit SizeEach

자주 묻는 질문(FAQ)

How do I keep my sample from spreading on the pedestal of my NanoDrop Lite Spectrophotometer?

There are many reagents and organic solvents that could compromise the pedestal surface properties, causing samples to flatten out rather than bead up. Use the NanoDrop PR-1 reconditioning compound as a rapid means of reconditioning the pedestals when the pedestal surface properties have been compromised and samples spread out on the pedestal. NanoDrop PR-1 Reconditioning Kits are available through Thermo Fisher website (Cat. No. CHEM-PR1-KIT)

My NanoDrop 8000 Spectrophotometer failed calibration check. What should I do?

Please review the following steps to take when/if your NanoDrop 8000 Spectrophotometer fails a calibration check:
- Clean the pedestal with the NanoDrop PR-1 Reconditioning Kit
- Repeat calibration check using a FRESH vial of NanoDrop CF-1 Calibration Fluid and FRESH blanking solution
- If instrument continues to be out of specification, Contact Technical Support

My NanoDrop 2000/2000c Spectrophotometer failed the calibration check. What should I do?

Please review the following steps to take when/if your NanoDrop 2000/2000c fails a calibration check:
- Clean the pedestal with the NanoDrop PR-1 Reconditioning Kit
- Repeat calibration check using a FRESH vial of NanoDrop CF-1 Calibration Fluid and FRESH blanking solution
More detailed instructions can be found on the Calibration Check Procedure document: https://assets.thermofisher.com/TFS-Assets/CAD/Product-Bulletins/NanoDrop-2000-2000c-1000-Calibration-Check-procedure.pdf
If your NanoDrop 2000/2000c continues to be out of specification, Contact Technical Support.