Nalgene™ Narrow-Mouth Polycarbonate Bottles with Closure
Nalgene™ Narrow-Mouth Polycarbonate Bottles with Closure
Nalgene™ Narrow-Mouth Polycarbonate Bottles with Closure
Nalgene™ Narrow-Mouth Polycarbonate Bottles with Closure
Nalgene™ Narrow-Mouth Polycarbonate Bottles with Closure
Thermo Scientific™

Nalgene™ Narrow-Mouth Polycarbonate Bottles with Closure

충격에 강한 Thermo Scientific™ Nalgene™ Narrow-Mouth Polycarbonate Bottles with Closure를 이용하여 시료를 효과적으로 냉동시키십시오.
Have Questions?
보기 방식 변경buttonViewtableView
카탈로그 번호용량(미터법)마개 크기제품 사이즈
DS2205-00208 L53BEach
2205-00160.5 L38-430 mmCase of 24
2205-0016PK
2205-0016으로도 사용됨
0.5 L38-430 mmPack of 4
2205-00321 L38-430 mmCase of 24
2205-0032PK
2205-0032으로도 사용됨
1 L38-430 mmPack of 4
DS2205-02102 L38-430 mmEach
DS2205-02502.5 L38-430 mmEach
DS2205-00104 L38-430 mmEach
카탈로그 번호 DS2205-0020
제품 가격(KRW)
110,000
Each
카트에 추가하기
용량(미터법):
8 L
마개 크기:
53B
Unit Size:
Each
제품 가격(KRW)
110,000
Each
카트에 추가하기

투명하고 충격에 강한 Thermo Scientific™ Nalgene™ Narrow-Mouth Polycarbonate Bottles with Closure를 이용하여 시료를 효과적으로 냉동시키십시오.

특징:
  • 16 온스 및 0.25 갤런 크기는 내용물을 볼 수 있어야 하는 작은 양 사용 시 적합하고, 0.5 및 0.66 갤런 크기는 배치(batch), 부유(suspension) 또는 비부착 롤러(nonattached roller) 배양 등의 배양 용기로 사용할 수 있습니다.
  • 1 및 2 갤런 크기에는 빌트-인 숄더 루프(shoulder loop)가 있어 식별 태그 부착 가능
  • 이 병은 내충격성이 탁월하여 최저 -135°C(-211°F)까지 냉동고에서 사용 가능
  • 주름 형성으로 인해 누액을 일으키거나 시약 오염을 일으킬 소지가 있는 라이너가 없는 라이너리스 캡을 사용하여 누액 방지 성능 우수
  • 고압멸균 가능(autoclavable)/투명/누액 방지†

포함 항목:

누액 방지† 폴리프로필렌 스크류 캡

주의:

고압멸균(autoclaving) 전에 스레드(threads)를 완전히 풀거나 캡을 제거하십시오. 빈 용기 상태로 고압멸균하십시오. 반복적 고압멸균(autoclaving) 시 병 수명이 단축됩니다.

보증: 90일.  보증 조건에 대한 자세한 내용은 technicalsupport@thermofisher.com으로 문의하십시오.

내부 연구 목적 사용 제한에 대한 면책 사항: 내부 연구 목적만을 위해 제품을 이용하는 구매자에 대한 어떠한 제한 사항도 이 문구와 관련된 웹 페이지의 제품에 적용되지 않습니다. † 누액 방지라는 용어는 다음 기준을 충족하는 Thermo Scientific Nalgene 제품에 대해 적용됩니다. a) 마개의 크기가 100mm보다 작은 병/플라스크/깔때기 마개 시스템에 물을 채우고 뒤집은 후 2분간 2 psig의 공기압을 가했을 때 물이 새어 나오지 않습니다. b) 100mm보다 큰 병/깔때기/플라스크 마개 시스템에 물을 채우고 뒤집은 후 15분간 유지했을 때 물이 새어 나오지 않습니다. 참고: 다른 액체로 동일한 테스트를 실시할 경우 결과는 달라질 수 있습니다. 안전한 사용을 위해 고객 각자의 계획된 사용 조건에서 Thermo Scientific Nalgene 병 및 마개 테스트를 수행할 것을 권장합니다. Thermo Scientific Nalgene 제품은 해당 Nalgene 마개와 함께 사용할 때 주변 온도와 압력에서 누액이 방지됩니다.
사양
오토클레이브 가능Autoclavable
용량2 gal., 8L
마개 색상Natural
마개 라이너Unlined
마개 재질Polypropylene
마개 크기53B
마개 유형Screw Closure w/TPE Gasket
설명Narrow-Mouth Bottle
직경(미터법)193 mm
직경(미터법) 내부 넥37 mm
높이(영국식 단위)9.8 in.
높이(미터법)409 mm
넥 마감53B
케이스당 수1
팩당 수1
마개 디스펜싱을 통해No
폭(영국식 단위)7.6 in.
용량(영국식 단위)2 gal.
용량(미터법)8 L
인증/규정준수Manufactured in compliance with ISO 13485:2016 quality requirements. Bottles and Closures meet the requirements of 21CFR177.1580 for food and beverage use, USP Class VI.
Closure IncludedYes
색상Clear
물질Polycarbonate
마우스Narrow
제품 유형Narrow Mouth Bottle
형상Round
멸균Non-sterile
Unit SizeEach

자주 묻는 질문(FAQ)

Why are your Nalgene containers and caps always different materials?

In order to function as a leakproof system without a liner (one of the key advantages of our laboratory and packaging products), the surfaces of the container and closure that meet and push together when tightened must be dissimilar materials with different hardnesses. Even our polypropylene copolymer (PPCO) bottles with polypropylene homopolymer (PP) bottles are different enough to function properly. On some larger carboy products, this difference cannot be sufficiently maintained so a pliable thermoplastic elastomer (TPE) gasket is added for proper leakproof seal function.