GeneJET Gel Extraction and DNA Cleanup Micro Kit
해당 제품을 구매한 고객들이 함께 검색한 제품을 추천해드립니다. 온라인 할인 진행 중!
GeneJET Gel Extraction and DNA Cleanup Micro Kit
Thermo Scientific™

GeneJET Gel Extraction and DNA Cleanup Micro Kit

이 키트는 스핀 컬럼 기술의 편의성과 silica 막(membrane)의 선택적 결합 속성을 모두 갖추고 있어 지루한 수지 조작이나 독성 페놀-클로로폼 추출자세히 알아보기
Have Questions?
보기 방식 변경buttonViewtableView
카탈로그 번호수량
K083150 Preps
K0832250 Preps
카탈로그 번호 K0831
제품 가격(KRW)
140,000
온라인 행사
Ends: 31-Dec-2025
164,000
할인액 24,000 (15%)
Each
카트에 추가하기
수량:
50 Preps
제품 가격(KRW)
140,000
온라인 행사
Ends: 31-Dec-2025
164,000
할인액 24,000 (15%)
Each
카트에 추가하기
이 키트는 스핀 컬럼 기술의 편의성과 silica 막(membrane)의 선택적 결합 속성을 모두 갖추고 있어 지루한 수지 조작이나 독성 페놀-클로로폼 추출 작업이 필요하지 않습니다.

GeneJET Gel Extraction and DNA Cleanup Micro Kit는 PCR과 다른 반응 혼합물에서 프라이머, primer dimer, dNTP, unincorporated 표지된 뉴클레오티드, 효소, 염을 제거합니다. 이 키트는 100bp-20kb의 DNA 분절을 정제하는 데 사용할 수 있습니다. 회수율은 100bp-3kb의 DNA 분절 크기 범위에서 90-100%에 이릅니다. 각 GeneJET DNA Purification Column의 총 결합능은 DNA 10μg이며, DNA 세척을 위한 전체 절차를 완료하기까지 약 3.5분이 소요됩니다.

주요 특징

첨단 컬럼 디자인—열기, 로딩, 처리가 쉬움
농축된 DNA 생성 - 6-10μL의 용적에서 용출
높은 회수율 - 100-3000bp DNA 분절 범위에서 90-100%의 회수율
신속성—4분 반응 혼합물 세척과 15분 agarose 겔 정제 프로토콜 사용 가능
반응 오염물의 효율적인 제거 - 효소, 단백질, primers dimer, dNTP, 염 등을 제거
유연성—정밀한 겔 슬라이스 정량 중량이 필요하지 않음

어플리케이션

다음과 같은 일반적인 다음 단계 어플리케이션에서 정제 DNA를 사용할 수 있습니다.

• 염기서열 분석
• 제한 절단
• PCR
• qPCR
• 표지
• 접합(Ligation)
• 클로닝
In vitro 전사
• 블로팅(Blotting)
In situ hybridization

구성

• Binding Buffer
• Extraction Buffer
• Prewash Buffer(conc.)
• Wash Buffer(conc.)
• Elution Buffer
• DNA Purification Micro Column & Collection Tube
For Research Use Only. Not for use in diagnostic procedures.
사양
컬럼 유형Spin Column
용도(애플리케이션)Real-Time Quantitative PCR (qPCR), Cloning, Southern Blotting, Nucleic Acid Labeling, Sequencing, PCR, In Vitro Transcription
고처리량 호환성Not High-throughput Compatible (Manual)
제품라인GeneJET
제품 유형Gel Extraction and DNA Cleanup Kit
수량50 Preps
샘플 종류DNA, Gel Samples
타겟DNA from Enzymatic Reactions (e.g. PCR)
테스트 시간15 min.
형식Spin Column
Isolation TechnologySilica Column
Unit SizeEach

자주 묻는 질문(FAQ)

Can I use water instead of Elution Buffer in the elution step of GeneJET and MagJET nucleic acid purification kits?

We would highly recommend using the provided Elution Buffer in the elution step for best results. You may use nuclease-free water; however, it may affect the yield of the nucleic acids during purification and their stability during storage.

Can I use a vacuum manifold with GeneJET kits?

The GeneJET spin columns are compatible with vacuum manifolds of standard size (e.g. Qiagen, Sigma-Aldrich, Promega). However, not all GeneJET kits are supported with a vacuum protocol. Please refer to the particular kit protocol for the detailed procedure.

At what temperature should I perform centrifugation steps in the GeneJET kits?

We recommend performing centrifugation steps at room temperature when the temperature is not specified.

Are GeneJET spin columns or MagJET magnetic beads available separately?

No, we do not offer GeneJET columns or MagJET magnetic beads separately at this time.