Novex™ Hi-Density TBE Sample Buffer (5X)
Novex™ Hi-Density TBE Sample Buffer (5X)
Invitrogen™

Novex™ Hi-Density TBE Sample Buffer (5X)

Novex™ TBE Gels provide the highest resolution possible for analyzing restriction digests and PCR products. DNA fragments ranging from 10자세히 알아보기
Have Questions?
카탈로그 번호수량
LC667810 mL
카탈로그 번호 LC6678
제품 가격(KRW)
168,000
온라인 행사
Ends: 31-Mar-2026
192,000
할인액 24,000 (13%)
Each
카트에 추가하기
수량:
10 mL
대량 주문 또는 맞춤형 요청
제품 가격(KRW)
168,000
온라인 행사
Ends: 31-Mar-2026
192,000
할인액 24,000 (13%)
Each
카트에 추가하기
Novex™ TBE Gels provide the highest resolution possible for analyzing restriction digests and PCR products. DNA fragments ranging from 10 to 3,000 base pairs are clearly resolved into sharp, tight bands. Novex™ DNA Retardation gels are prepared with 0.5X TBE as the gel buffer. This is sufficient for good electrophoretic separation, yet low enough to promote DNA-protein interactions. Novex™ TBE and DNA Retardation Gels are designed to run on the XCell SureLock™ Mini-Cell.

Formulation:

Novex™ TBE and DNA Retardation Gels are manufactured with high-purity tris base, boric acid, EDTA, acrylamide, bisacrylamide, TEMED, and APS.

Recommended Buffers:

For optimum performance, Novex™ TBE Running Buffer and Novex™ Hi-Density TBE Sample Buffer are strongly recommended for use with these gels. Novex™ Hi-Density TBE Sample Buffer contains the density agent Ficoll™, which yields sharper, straighter bands than conventional density agents, and the tracking dyes Bromophenol Blue and Xylene Cyanol.
For Research Use Only. Not for use in diagnostic procedures.
사양
버퍼Sample Loading Buffer
농도5 X
용도(애플리케이션)Nucleic Acid Gel Electrophoresis, Blotting
젤 호환성Polyacrylamide Gels
라벨 또는 염료Bromophenol Blue, Xylene Cyanol
제품라인Novex
제품 유형TBE Buffer
수량10 mL
배송 조건Wet Ice
Unit SizeEach
구성 및 보관
Store at 2°C to 8°C

자주 묻는 질문(FAQ)

My Novex TBE buffer has precipitated out of solution. What can I do?

If a slight turbidity develops, the fine precipitate can be dissolved by autoclaving for 5 minutes at 110°C. Do not autoclave in the container supplied. This treatment has no deleterious effect on the buffering properties of TBE.

Do you have the recipe for the TBE running buffer and the Hi-Density TBE Sample Buffer?

Please see the recipes below:

TBE Running Buffer (5X):
Tris base, 54.0 g
Boric acid, 27.5 g
EDTA (free acid), 2.9 g
Deionized water to 1.0 L

Hi-Density TBE Sample Buffer (5X):
5X TBE Running buffer (Cat. No. LC6675), 2 mL
Ficoll Type 400, 1.5 g
Bromophenol blue, 1 mL of 1% solution
Xylene cyanol 1 mL of 1% solution
Deionized water to 10.0 mL