MaxQ™ 5000 Floor-Model Shaker, incubated, digital, 15-500rpm, 240V

Complete large capacity applications with ease using the Thermo Scientific™ MaxQ™ 5000 Floor-Model Shakers, versatile incubated/refrigerated units featuring an easy side-access drain system, making cleaning spills easy and retractable foot casters to easily position the shaker in the lab. These shakers also feature a foot pedal for hands-free operation and a large slanted viewing window to check progress. Ideal for cell culture, solubility studies, plasmid purification, staining and destaining, extraction procedures, protein expression and many other applications.

Key Features:

• Easily accommodate six 4L flasks, four 6L flasks or six 2800mL Fernbach flasks
• Wide temperature range: 10°C above ambient to 60°C on incubated models, 15°C below ambient to 60°C on refrigerated models
• Monitor and control chamber temperature range with ±0.1°C accuracy at 37°C
• Overtemperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails
• Triple eccentric drive handles heavy loads, uniform agitation and continuous 24 hr. operation, even at high speeds
• Drip pan built into the chamber floor under the platform contains spills
• Clear, scratch-resistant lid for sample viewing
• With foot pedal for hands-free operation and retractable casters for portability
• Optional shelf provides additional storage space and convenience when switching flasks
• Access ports provided through side of cabinet wall for probes, thermocouples or sensors
• Optional gassing manifold enables direct gassing into flasks for anaerobic cultures

Analog Models:

• Easy-to-read LED digital temperature display
• Perform timed studies with timed operation from 1 to 60 minutes or operate shaker in continuous mode

Digital Models:

• Variable speed control from 15 to 500rpm
• Continuous and timed operation from 0.1 hour up to 999 hours or 0.1 to 999 min.
• View speed, time and temperature simultaneously on three separate LED digital displays
• Visual/audible alarms alert to temperature deviations; heat turns off if temperature deviates ±1°C of setpoint
• Shaker shutdown and audible/visual alarms signal if unit operates ±10% of set speed, preventing the shaker from walking
• Soft-start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure
• User-adjustable speed calibration can be performed using a digital handheld tachometer, where verification is required and protocols can be standardized
• Unbalanced load sensor stops platform motion when excess vibration is detected and visual/audible alarms signal until condition is corrected
• Retains parameters during power failure and restarts unit automatically after power is restored
• Solid-state DC brushless motor is maintenance-free
• RS-232 interface allows remote monitoring of speed, time and temperature

Overall Dimensions:

• Platform dimensions: 30 × 18″ (76 × 45 cm)
• Overall Dimensions L × W × H: 32 × 41 × 41″ (83.1 × 104.1 × 104.1 cm)

Shipping Weight:

• Models SHKA5000 and SHKE5000: 476 lb. (215.9kg)
• Models SHKA5000-7 and SHKE5000-7: 512 lb. (232.2kg)

Ordering Information:

For a complete system, order platforms and clamps (sold separately)

Requires:

• Universal Platform (without clamps), or
• Dedicated Platform (with pre-installed clamps)
• Clamps

Recommended for:

• Cell culture
• Bacterial suspensions
• Solubility studies
• Staining and destaining
• Extraction procedures
• Washing procedures
• Plant growth
• Hybridizations
• General mixing
• Plasmid purification
• Protein expression