DS-32 Matrix Standard Kit (Dye Set F)

El conjunto de patrones de matriz DS-32 se emplea para generar la «matriz de multicomponentes» necesaria al analizar fragmentos deMás información

Número de catálogo	Cantidad
4345831	8 desarrollos

Número de catálogo 4345831

Precio (MXN)

Cantidad:

8 desarrollos

El conjunto de patrones de matriz DS-32 se emplea para generar la «matriz de multicomponentes» necesaria al analizar fragmentos de ADN etiquetados con 5-FAM™, JOE™, NED™ y ROX™ en los sistemas Applied Biosystems™ serie 31xx, 3500 y 3730.El software de recopilación de datos utiliza la matriz de multicomponentes para analizar automáticamente las cinco muestras etiquetadas con tintes fluorescentes diferentes en un solo capilar.

Admite aplicaciones de identidad humana de 4 colorantes (por ejemplo, kits AMPFlSTR™), StockMarks™ y ensayos de AFLP microbianos/vegetales.

Para uso exclusivo en investigación.No apto para uso en procedimientos diagnósticos.

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.

Especificaciones

Para utilizar con (aplicación)Secuenciación

Para utilizar con (equipo)Analizador genético SeqStudio, analizador genético 3500, analizador genético 3500xL, analizador genético 3130

Etiqueta o tinteFAM, JOE, NED, ROX

Tipo de productoKit de patrón de matriz DS-32

Cantidad8 desarrollos

Condiciones de envíoHielo húmedo

FormatoKit

Unit SizeEach

Contenido y almacenamiento

Contiene un conjunto de fragmentos de ADN para patrones de matriz con etiquetas de colorante fluorescente únicas. Suficiente para 8 ciclos. Almacenar el kit a 2 - 8 °C. No congelar.

Preguntas frecuentes

What is a spectral calibration?

A spectral calibration is an algorithm applied to raw data, which converts it into the component 4 or 5 dye data stored in the sample files. A spectral is created for a specific dye set (combination of dyes), array type (4 or 16 capillaries), and array length (36cm or 50cm). It is used to correct for the natural overlap of the fluorescent dyes.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

Which fragment analysis matrix standards can I use for my Applied Biosystems 3130 Series instrument?

DS-02 (Dye Set E5), DS-30 (Dye Set D), DS-31 (Dye Set D), DS-32 (Dye Set F), and DS-33 (Dye Set G5) are all supported on the Applied Biosystems 3130 Series systems. Please refer to the Applied Biosystems 3130/3130xl Genetic Analyzers Getting Started Guide (http://tools.thermofisher.com/content/sfs/manuals/cms_041468.pdf) for more information.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Applications Support Center.

I am using only one dye for fragment analysis but I see peaks in other colors below my peak of interest. Why is this?

If the peaks in other colors are directly below the peak of interest, the issue could be that the fluorescent dye being used is not part of the selected dye set, the spectral calibration needs to be performed, or the peaks are offscale. Confirm that the dye set selected on the instrument is compatible with the dye being used, run a new spectral calibration if the correct dye set has been selected and, if the signal intensity is too high, decrease sample concentration during PCR or when preparing samples for electrophoresis.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Applications Support Center.

Can I switch dyes during a fragment analysis project?

We do not recommend that you switch dyes in the middle of a project. Switching dyes may result in a shift in the allele sizes as dyes differ in their mobility. If dyes are switched in the middle of a project, it will be necessary to identify the size shift for all the markers/targets in the amplicon product range. The size shift will be consistent throughout the project and it is only necessary to make the adjustment once.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Applications Support Center.

What is a dye set?

A dye set is a combination of dyes that have minimum spectral overlap, which will allow you to multiplex products of similar size using different dyes. Although the size ranges may overlap, the use of a different dye will allow the software to easily distinguish between these products.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Applications Support Center.

View all DS-32 Matrix Standard Kit (Dye Set F) FAQs