3500xL Genetic Analyzer 24-Capillary Array, 50 cm

Los capilares sin revestimiento interno se suministran en conjuntos premontados de 24 capilares por matriz, con un bastidor incorporado paraMás información

Número de catálogo	Cantidad
4404689	1 matriz

Número de catálogo 4404689

Precio (MXN)

Cantidad:

1 matriz

Los capilares sin revestimiento interno se suministran en conjuntos premontados de 24 capilares por matriz, con un bastidor incorporado para facilitar la instalación.

Aplicaciones de los capilares de 50 cm:
Secuenciación, análisis de fragmentos y análisis de calidad de proteínas

Solo para uso en investigación.No apto para uso en procedimientos diagnósticos.

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.

Especificaciones

Longitud del capilar50 cm

DescripciónMatriz de 24 capilares, capilares de 50 cm, tiempo de ejecución de 125 min., capilares sin revestimiento interno, análisis de fragmentos, análisis de calidad de las proteínas, aplicaciones de secuenciación, para su uso con analizador genético 3500xL, temperatura ambiente

Para utilizar con (aplicación)Análisis de calidad de las proteínas, análisis de fragmentos, secuenciación

Para utilizar con (equipo)Analizador genético 3500xL

Longitud (métrico)50 cm (capilar)

Tipo de productoMatriz de 24 capilares para analizador genético

Cantidad1 matriz

Tiempo de actividad125 min

Condiciones de envíoTemperatura ambiente

Software TypeAnálisis de fragmentos

Unit SizeEach

Contenido y almacenamiento

Almacenar esta matriz a temperatura ambiente. Para obtener más información sobre cómo almacenar la matriz de capilares dentro y fuera del instrumento, consulte la Guía del usuario del analizador genético Applied Biosystems 3500/3500xL.

Preguntas frecuentes

My array is stuck in the pump on my Applied Biosystems 3500/3500xL Genetic Analyzer, even after loosening the knob. What can I do?

If the array is stuck in the pump, even after loosening the knob, squirt around the edge of the array head with distilled water and try to remove it again. If the array will not move, a service call may be required. Do not use excessive force or tools to try and remove it.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

When I started my run on the Applied Biosystems 3500/3500xL Genetic Analyzer, an error occurred: "Unstable Electrophoresis current detected, check for air bubbles" but I don't see any bubbles. What else can cause this?

Some of the other causes of an Unstable Electrophoresis current detected error message are:

1.Leak on the system
2. Polymer that:
-Has expired
-Has been left on the instrument for more than the recommended time
-Is a mixture of expired polymer and non-expired polymer
3. Running Buffer that was:
-On the instrument longer than 2 weeks
-Not filled to the fill line or evaporated below the fill line
4. An arcing event that was not cleaned afterwards using the water wash wizard
5. Not performing regular maintenance on the instrument
6. Hardware issues

Inspect the system for leaks. If you do not see any leaks on the system, perform the wash the pump chamber and channels wizard using the conditioning pouch and place fresh, non-expired polymer and fresh Anode and Cathode buffer containers. If the problem persists, a service call may be required.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

I have an Applied Biosystems 3500/3500xL Genetic Analyzer. When do my consumables expire?

If we do not specify the expiry date or number of uses, the warranty will last for 12 months from the date of shipment.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

How often should I change the array on my Applied Biosystems 3500/3500xL Genetic Analyzer?

The Applied Biosystems 3500/3500xl Genetic Analyzer capillary arrays are warrantied for a specific number of runs or until the expiration date printed on the array package, whichever comes first. If you notice that you are starting to get reduced data quality (e.g., shorter reads, trailing peaks in all 4 colors) even with the Sequencing Standard, these may be signs that the array requires changing.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

My Applied Biosystems 3500/3500xL Genetic Analyzer consumables have expired, but how long past expiration can I really use them?

Thermo Fisher Scientific can only provide warranty on performance on non-expired reagents. Using reagents past their expiration date is a risk and may compromise your data integrity.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

View all 3500xL Genetic Analyzer 24-Capillary Array, 50 cm FAQs