Applied Biosystems™

Septa for 8-Well Strips, for 3500/SeqStudio™ Flex

Estos septos para 8 tiras se han diseñado y validado para su uso con los analizadores genéticos Applied Biosystems 3500 y SeqStudio Flex.

Número de catálogo	Cantidad
4410701	24 cada uno

Número de catálogo 4410701

Precio (MXN)

Cantidad:

24 cada uno

These septa for 8-tube strips were designed and validated for use with Applied Biosystems 3500 and SeqStudio Flex series genetic analyzers.

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.

Especificaciones

Para utilizar con (equipo)Analizadores genéticos de la serie 3500, analizadores genéticos de la serie SeqStudio Flex

FormatoTira de septos de 8 pocillos

Tipo de productoTira de septos

Cantidad24 cada uno

Condiciones de envíoTemperatura ambiente

Unit SizeEach

Contenido y almacenamiento

Este producto contiene 24 septos.

Preguntas frecuentes

When I started my run on the Applied Biosystems 3500/3500xL Genetic Analyzer, an error occurred: "Unstable Electrophoresis current detected, check for air bubbles" but I don't see any bubbles. What else can cause this?

Some of the other causes of an Unstable Electrophoresis current detected error message are:

1.Leak on the system
2. Polymer that:
-Has expired
-Has been left on the instrument for more than the recommended time
-Is a mixture of expired polymer and non-expired polymer
3. Running Buffer that was:
-On the instrument longer than 2 weeks
-Not filled to the fill line or evaporated below the fill line
4. An arcing event that was not cleaned afterwards using the water wash wizard
5. Not performing regular maintenance on the instrument
6. Hardware issues

Inspect the system for leaks. If you do not see any leaks on the system, perform the wash the pump chamber and channels wizard using the conditioning pouch and place fresh, non-expired polymer and fresh Anode and Cathode buffer containers. If the problem persists, a service call may be required.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

Do I need to replace the buffer every 14 days if the Applied Biosystems 3500/3500xL Genetic Analyzer is not in use?

If the instrument is not in use, it is not necessary to replace the buffer every 14 days. However, the buffer level needs to remain at the fill line to prevent the capillary or array from drying out. Top off the buffer volume with water if necessary. Replace the anode and cathode buffer containers prior to starting a new run.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.