El kit de inicio de PCR digital QuantStudio Absolute Q está diseñado para confirmar el rendimiento del sistema de PCRMás información
Have Questions?
Número de catálogo
Cantidad
A52732
1 kit
Número de catálogo A52732
Precio (MXN)
-
Cantidad:
1 kit
El kit de inicio de PCR digital QuantStudio Absolute Q está diseñado para confirmar el rendimiento del sistema de PCR digital QuantStudio Absolute Q en el momento de la instalación del sistema o como parte de procedimientos de verificación de sistemas futuros y definidos por el usuario.El kit de inicio también se puede utilizar para formar a los usuarios sobre el flujo de trabajo del sistema de PCR digital QuantStudio Absolute Q.
El kit de inicio contiene la mezcla maestra de PCR digital DNA Absolute Q (5X) (n.° de cat.A52490), el ensayo de inicio dPCR Absolute Q y el control de ADN CEPH, que proporcionan un conjunto completo de reactivos y ensayos de inicio para su uso con el kit de placas QuantStudio Absolute Q MAP16 (n.° de cat.cat. A52865).
Para uso exclusivo en investigación.No apto para uso en procedimientos diagnósticos.
Especificaciones
Para utilizar con (equipo)Sistema de PCR digital QuantStudio™ Absolute Q™
FormatoTubo
Línea de productosAbsolute Q
Cantidad1 kit
Condiciones de envíoHielo seco
TécnicaPCR digital
Método de PCRPCR digital
Unit SizeEach
Contenido y almacenamiento
1 - Mezcla maestra 1 para PCR de ADN digital Absolute Q™- Ensayo básico dPCR Absolute Q™ (conc. de 20) 1 - ADN de control de CEPH 1347-02. Almacenar entre -15 °C y -25 °C.
Preguntas frecuentes
I finished running my experiment on the QuantStudio Absolute Q Digital PCR instrument but just realized that I had selected the wrong dyes during setup. Can I change the dyes that were used after the run?
If dye channels are turned off before the run, then data will not be collected for them as the run progresses. This means that changing the dyes after the run will not be possible.
I ran my experiment using the QuantStudio Absolute Q Digital PCR System but did not actually use dyes in all the channels. Is there a way to only see those dye channels that were used?
Unused dye channels can be turned off after the run by going to the SETUP tab and clicking EDIT SETUP and then EDIT GROUPS. Here, the Analysis can be changed to Not Used. After clicking SAVE twice, the data will be reanalyzed and the unused dye channels will not be present in the analysis.
I'm using the QuantStudio Absolute Q Digital PCR System and the software is saying that the concentration is NaN. What does that mean?
NaN stands for not a number. The software will display NaN instead of an actual number when it has detected some issue during the analysis of the array images.
With the QuantStudio Absolute Q Digital PCR instrument, the run data didn't automatically transfer after the run completed. How can I get the data?
We would recommend restarting the software. If the run still doesn't transfer, we would recommend closing the software, rebooting the instrument, and then starting the software. If further assistance is needed, please contact Technical Support at techsupport@thermofisher.com.
With the QuantStudio Absolute Q Digital PCR System, how much sample can be loaded into each well?
9 µL of sample is loaded into each well along with 15 µL of isolation buffer. Loading more or less of either the sample or isolation buffer will affect filling of the microchambers and the run results.