MCP-1 (CCL2) Human ProcartaPlex™ Simplex Kit, high sensitivity
MCP-1 (CCL2) Human ProcartaPlex™ Simplex Kit, high sensitivity
Invitrogen™

MCP-1 (CCL2) Human ProcartaPlex™ Simplex Kit, high sensitivity

El kit humano MCP-1 (CCL2) de alta sensibilidad Simplex ProcartaPlex mide la proteína MCP-1 (CCL2) y está diseñado para poderseMás información
Have Questions?
Número de catálogoCantidad
EPXS010-10281-90196 pruebas
Número de catálogo EPXS010-10281-901
Precio (MXN)
-
Cantidad:
96 pruebas
El kit humano MCP-1 (CCL2) de alta sensibilidad Simplex ProcartaPlex mide la proteína MCP-1 (CCL2) y está diseñado para poderse combinar con otros kits de alta sensibilidad Simplex, de modo que pueda crear su propio panel multiplex que utiliza la tecnología Luminex xMAP para la detección o cuantificación de proteínas. Cuando se combinan varios kits Simplex (es decir, cuando no se utiliza un panel multiplex preconfigurado), solo se necesita un kit de tampón (se vende por separado) para cada placa de ensayo, independientemente del tamaño del complejo.

Los inmunoensayos ProcartaPlex de alta sensibilidad permiten el análisis multiplexado de analitos humanos y de ratón en concentraciones muy bajas en diversas matrices, como suero, plasma, fluidos corporales y muestras de sobrenadantes de cultivo celular. Estos ensayos multiplex de alta sensibilidad son ideales cuando la entrada de muestras es limitada y la expresión de proteínas está en el rango bajo de pg/ml.

Los inmunoensayos ProcartaPlex se basan en los principios de un ELISA tipo sándwich, utilizando dos anticuerpos altamente específicos que se enlazan a diferentes epítopos de una proteína para cuantificar hasta 65 objetivos de proteínas simultáneamente cuando se usa el instrumento FLEXMAP 3D o Luminex 200, y hasta 50 objetivos de proteínas cuando se usa el instrumento MAGPIX. Los ensayos ProcartaPlex requieren tan solo 25 µl de plasma o suero, o 50 µl de sobrenadante de cultivo celular, y solo cuatro horas para obtener los resultados analizados.
Más resultados por muestra: mida hasta 65 objetivos de proteínas en una sola muestra de 25 a 50 µL
Tecnología Luminex bien establecida: la plataforma de multiplexación más referenciada para la detección y cuantificación de proteínas

Los gránulos superparamagnéticos Luminex MagPlex en el ensayo ProcartaPlex se tiñen internamente con proporciones precisas de rojo e fluoróforos infrarrojos para crear 100 firmas espectrales únicas que pueden ser identificadas por los sistemas de detección Luminex xMAP (Luminex 200, FLEXMAP 3D y sistemas MAGPIX). Similar a un ELISA tipo sándwich, el ensayo ProcartaPlex utiliza pares de anticuerpos emparejados para identificar la proteína de interés. En un ensayo multiplex ProcartaPlex, cada microesfera espectralmente única se etiqueta con anticuerpos específicos para una sola proteína objetivo, y las proteínas ligadas se identifican con anticuerpos biotinilados y estreptavidina, R-ficoeritrina (RPE). La conjugación de anticuerpos específicos de proteínas con un gránulo distinto permite el análisis de varios analitos en un solo pocillo.

La diferencia más significativa entre un ensayo ProcartaPlex y un ELISA es que el anticuerpo de captura del ensayo ProcartaPlex se conjuga con una microesfera magnética y no se adsorbe en el pocillo de la microplaca, por lo que los reactivos del ensayo ProcartaPlex flotan en la solución. Para la detección, el instrumento Luminex 200, por ejemplo, contiene dos láseres, uno para distinguir la firma espectral de cada gránulo y el segundo para cuantificar la cantidad de fluorescencia RPE, que es proporcional a la cantidad de proteína presente en la muestra. Los ensayos multiplex de ProcartaPlex pueden perfilar hasta 80 veces más proteínas objetivo utilizando significativamente menos muestra en el mismo tiempo que se tarda en realizar un ELISA de tipo sándwich tradicional.

Los kits de ProcartaPlex Simplex le proporcionan la capacidad de crear su propio panel único. Más del 90 % de los objetivos ProcartaPlex Simplex se pueden combinar, lo que le proporciona una flexibilidad superior a la hora de crear su propio panel multiplex.

Los kits ProcartaPlex Simplex están disponibles en seis especies (humana, ratón, rata, primate no humano, porcina y canina).

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.
Especificaciones
Intervalo del ensayoSegún lo determinado para el lote 1: De 0,159 a 650 pg/ml
Sensibilidad del ensayoMenos del 15 %
Tipo de esferaMCP-1 (CCL2) [51 ]
Para utilizar con (equipo)Instrumentos Luminex™
FormatoKit Simplex de alta sensibilidad
génicaligando quimioquina 2 de motivo C-C
Alias de genGDCF-2, HC11, HSMCR30, MCAF, MCP-1, MCP1, SCYA2 y SMC-CF
ID de gen (Entrez)6347
Símbolo de genCCL2
Línea de productosProcartaPlex
Expresiónquimiocina 2 motivo C-C
Subtipo de proteínaHC11, MCAF, citocina A2 de inducción pequeña
Tipo de muestraSobrenadantes de cultivo celular, suero y plasma, Plasma, Cell Culture Supernatants
Volumen de muestraSuero, plasma: 25 μl; CCS: 50 μl
Condiciones de envíoHielo húmedo
ID. de UniProtP13500
CombinabilityCombinable (High Sensitivity Only)
Tipo de productoKit Simplex
Cantidad96 pruebas
Research AreaImmunology, Oncology, Neurobiology, Toxicology, Chemokines
EspecieHumano
Unit SizeEach
Contenido y almacenamiento
  • 1 vial de gránulos de captura (50X)
  • 1 vial de anticuerpos de detección biotinilada (50X)
  • 2 viales de mezcla estándar humana B - HS (liofilizada)
  • Almacenar entre 2 ° y 8 °C.

Preguntas frecuentes

What is the size of the Luminex beads you currently use?

The beads used in our Luminex instrument-compatible ProcartaPlex and QuantiGene Plex assays are 6.5 micron superparamagnetic beads.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

I am interested in performing Luminex assays using BioSource kits, and I have a Luminex xMAP system. Besides the kits and system, what other reagents and equipment will I need?

The following is a list of general lab supplies that are required for running BioSource immunoassays on the Luminex xMAP system:
1) Sonicating water bath
2) Orbital shaker
3) Vortexer
4) Repeating and/or multi-channel pipetter (not required, but recommended)
5) Calibrated adjustable precision pipettes, with disposable plastic tips
6) Glass/plastic tubes and racks for preparing reagents
7) Graduated cylinder and container for preparing wash solution
8) Aluminum foil
9) Deionized or distilled water.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Do the Luminex beads require special care in handling?

The Luminex beads should be protected from light because they are susceptible to photobleaching. We recommend protecting the beads by keeping containers covered with aluminum foil during all incubation steps, and exercising care during handling. The beads should not be frozen, subjected to excessive heat, or exposed to organic solvents.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Why would the Luminex acquisition software display "Sample Empty" messages during analysis?

(1) The user did not properly aliquot the diluted beads, such that no beads were actually added to the wells (make sure that the bead concentrates are sonicated and vortexed well, then check the pipet tip to ensure that air bubbles were not drawn up)
(2) The user missed loading diluted beads to some wells, which is likely since the small volume is clear and difficult to visualize in the clear plastic plate (we have now addressed this customer difficulty by coloring each of the Buffer Reagent Kit components)
(3) The user applied too much vacuum pressure at some point during the wash steps, or allowed the pressure to spike even once, such that the filter membrane tore in a few wells releasing the beads (make sure that the vacuum manifold pressure is kept below 5mm/in Hg, depending on their system -- a good rule of thumb is that it should take a full 3-second count to GENTLY empty the wells of 200uL)
(4) The user did not properly sonicate and vortex the beads prior to dilution, such that the percent of bead aggregation was high and the instrument was unable to find enough single beads to meet the events/bead value designated by the customer (make sure that the Bead Concentrate tube is put into the waterbath all the way to the cap, since the tube is hollow until the top third)
(5) The user lost beads by shaking the plate too aggressively or handling it improperly (make sure that the orbital shaker is set to a speed that allows for maximum vortex in the wells without spillage)
(6) The user exposed the beads to an excess of light during storage or running of the assay, such that some but not all of the beads were photobleached and therefore falling outside the acceptable range for each bead region (make sure that the plate is covered on the top/sides with foil throughout the assay, away from Windows and spotlights, and that the bead component of the kits is stored in the dark)*
(7) There was a clog in the sample needle, such that the instrument was unable to take up enough sample to meet the number of events requested per bead region (suggest that the user follow the manual instructions for dislodging a clog, which include several Back Flush steps and may require removal of the needle for sonication with probe alignment).

* Some of the older Antibody Bead Kits still have clear plastic tops instead of black ones. In cases where customers store kits in lit refrigerators, or keep them open on the lab bench, even a few hours of light exposure is enough to photobleach beads. It is important to note, in general, that higher number bead regions are more susceptible to photobleaching. In order to draw conclusions about the source of the difficulty, we would ask to see the data, specifically the Masterplex QT file, which would enable us to examine the pattern of "Sample Empty" occurrences in addition to the bead counts per well.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

What are the Luminex beads made of?

The beads are made of polystyrene.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.