Large Cellophane

El celofán grande es uno de los componentes del kit de secado de geles grandes para secar geles PAGE. ElMás información

Número de catálogo	Cantidad
NC2200	100/paq.

Número de catálogo NC2200

Precio (MXN)

Cantidad:

100/paq.

El celofán grande es uno de los componentes del kit de secado de geles grandes para secar geles PAGE. El kit de secado de geles grandes proporciona una forma rápida y fácil de secar geles de forma consistente sin agrietarse y puede alojar hasta 1-4 minigele(s) o un gel de gran formato.

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.

Especificaciones

Línea de productosNovex

Tipo de productoCelofán grande

Cantidad100/paq.

Condiciones de envíoTemperatura ambiente

Unit SizeEach

Contenido y almacenamiento

100/pack, almacenar a temperatura ambiente

Preguntas frecuentes

What are the dimensions of the Large Cellophane (Cat. No. NC2200)?

The Large Cellophane (Cat. No. NC2200) is a component of the Large Gel Drying Kit (Cat. No. NI2207). The Cellophane Dimensions are 22.35 cm × 22.85 cm. You will find these dimensions in the manual of the Drying Kit on page 4 (see link: https://assets.thermofisher.com/TFS-Assets/LSG/manuals/geldrying_man.pdf).

Find additional tips, troubleshooting help, and resources within our Protein Purification and Isolation Support Center.

I dried my gel using your DryEase Mini Gel Drying system and the gel cracked during drying. Can you please help?

Please see below for possible causes and solutions:

- Air trapped between cellophane layers. Apply adequate Gel-Drying solution to prevent bubbles between the gel and cellophane assembly.
- Tension on cellophane too strong. Take care not to stretch the cellophane during dryer assembly.
- Rough edges or small cracks on gel edges. Trim rough edges from the gel to eliminate starting points for cracks.
- Cellophane slips during drying. Make sure clamps hold all four edges of the dryer assembly firmly.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

I am using your DryEase Mini Gel Drying system and would like to peel off the cellophane after drying the gel but it seems really difficult. Can you please offer some tips?

Usually it is not necessary to peel off the cellophane. If your signal is very faint and you are concerned about getting an exposure, you can rub the top surface of your gel with a damp towel and then peel off the cellophane. Then air dry the gel for a few minutes and perform autoradiography.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

I dried my gel using Gel-Drying Solution and it dried milky white. Can the gel be recovered?

Gels turn white when they are dried too rapidly, usually in an environment that is too ventilated, drafty, or warm. You can remedy this problem by dabbing the gel with deionized water on a Kimwipe tissue to rehydrate the white areas. Re-dry the gel in a dark, dry, non-drafty place, such as a drawer or cabinet.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

What is the pore size of the DryEase cellophane?

The pore size of DryEase cellophane is 40 microns.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

View all Large Cellophane FAQs